Page 403 of 518
Aluminum hub cap
#
Toremo ve:position soc ket2 on hub cap
1.
% The soc ket can be found in the tire-change
to ol kit. #
Position wheel wrench 3on soc ket2. #
Using wheel wrench 3, turn hub cap1
counter-clo ckwise and remo veit. #
Toinstall: position hub cap 1and turn until
it is comple tely flush with the wheel. #
Position soc ket2 on hub cap 1. #
Attach wheel wrench 3tosoc ket2 and
tighten the hub cap clockwise.
Specified tightening torq ue: 18lb-ft
(25 Nm). Ra
ising theve hicle when changing a wheel Re
quirements:
R There are no persons in theve hicle.
R The vehicle has been prepared for a wheel
ch ange (→ page 400).
R The hub caps ha vebeen remo ved
( → page 400).
Impor tant no tes on using the jack:
R Use only theve hicle-specific jack that has
been tested and appr ovedby Mercedes-Benz
to raise theve hicle.
R The jack is only designed forra ising and
holding theve hicle for a short time while a
wheel is being changed and not for mainte‐
nance workunder theve hicle. R
The jack must be placed on a firm ,fl at and
non-slip sur face. If necessar y,use a lar ge,
fl at, load-bearing, non-slip unde rlay.
R The foot ofthe jack must be positioned verti‐
cally under the jack support point. Ru
les of conduct when theve hicle is raised:
R Never place your hands or feet under the
ve hicle.
R Never lie under theve hicle.
R Do not start the engine and do not release
th e electric parking brake.
R Do not open or close any doors or the trunk
lid. Wheels and tires
401
Page 421 of 518
Saf
ety sy stems Display messages
Possible causes/consequences and 0050
0050Solutions
00E5 Currently Unavailable See
Operator's Manual *
ESP ®
is temp orarily una vailable.
Other driving sy stems and driving saf ety sy stems may also malfunction. &
WARNING Risk of skidding if ESP ®
is malfunctioning
If ESP ®
is malfunctioning, ESP ®
cannot car ryout vehicle stabilization. In addition, other driving saf ety sy stems
are switched off. #
Drive on carefull y. #
Have ESP ®
ch ecked at a qualified specialist workshop. #
Carefully drive on a suitable stre tch of road, making slight steering mo vements at a speed abo ve19 mph
(30 km/h). #
Ifth e display message does not disappear, consult a qualified specialist workshop immediately. Drive carefully.
0049 (USA only)
0024 *
The red0049 (USA only) or 0024indicator lamp (Canada only) is lit.
Yo u ha veattem ptedto release the electric parking brake with the ignition switched off. #
Switch the ignition on. Display messages and
warning/indicator lamps 419
Page 422 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions
(Canada only)
Turn On the Ignition to
Release the Parking Brake
0049
(USA only)
0024 (Canada only)
Parking Brake See Opera-
tor's Manual *
The yellow 0024 indicator lamp is lit. The elect ric pa rking brake is malfunctioning.
To appl y: #
Switch off the ignition and switch it back on. #
Apply the electric parking brake manually (→ page153).
If it is not possible toapply the electric parking brake: #
Visit a qualified specialist workshop. #
Where necessar y,also safeguard the par kedve hicle against rolling away.
The yellow 0024 andthere d 0049 (USA only) or 0024(Canada only) indicator lamps are lit. The elect ric pa rking
brake is malfunctioning.
To release: #
Swit choff the ignition and switch it back on. #
Release the electric parking brake manually (→ page153).
or #
Release the electric parking brake automatically (→ page152).
If it is still not possible torelease the electric parking brake: #
Do not continue driving under any circums tances. Consult a qualified specialist workshop. 420
Display messages and warning/indicator lamps
Page 423 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions
The yellow 0024 indicator lamp is lit and there d0049 (USA only) or 0024(Canada only) indicator lamp is flashing.
The electric parking brake is malfunctioning.
The electric parking brake could not be applied or released. #
Swit choff the ignition and switch it back on.
To appl y: #
Release and then apply the electric parking brake manually (→ page153).
To release: #
Apply and then release the electric parking brake manuall y.
If th e electric parking brake cann otbe applied or there d0049 (USA only) or 0024(Canada only) indicator lamp
continues toflash: #
Do not continue driving under any circum stances. Consult a qualified specialist workshop. #
Where necessar y,also safeguard the par kedve hicle against rolling away.
The yellow 0024 indicator lamp is on and there d0049 indicator lamp (USA only) or the0024 indicator lamp (Can‐
ada only) flashes for appro ximately ten seconds af terth e electric parking brake has been applied or released. It
th en remains lit or goes out. The electric parking brake is malfunctioning.
If th e bat tery charge leve l is too lo w: #
Char gethe batter y.
To appl y: Displ
aymessa ges and warning/indicator lamps 421
Page 424 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions #
Switch off the ignition.
The electric parking brake is applied automaticall y.
If th e electric parking brake should not be applied, e.g. when washing theve hicle in an automatic car wash or when
having theve hicle towe d, lea vethe ignition switched on. This does not include having theve hicle towe d with the
re ar axle raised.
If th e electric parking brake is not applied automatically: #
Switch off the ignition and switch it back on. #
Release and then apply the electric parking brake manually (→ page153).
If it is still not possible toapply the electric parking brake: #
Visit a qualified specialist workshop. #
Where necessar y,also safeguard the par kedve hicle against rolling away.
To release: #
Ifth e conditions for auto matic release are fulfilled and the electric parking brake is not released automaticall y,
re lease the electric parking brake manually (→ page153).
If it is still not possible torelease the electric parking brake: #
Do not continue driving under any circums tances. Consult a qualified specialist workshop. 422
Display messages and warning/indicator lamps
Page 425 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions
0049 (USA only)
0024 (Canada only)
Please Release Parking
Brake *
The red0049 (USA only) or 0024(Canada only) indicator lamp flashes.
The electric parking brake is applied while you are driving:
R A condition for auto matic release of the electric parking brake is not fulfilled (→ page152).
R You are per form ing emer gency braking using the electric parking brake (→ page153). #
Che ckthat the conditions for auto matic release of the electric parking brake are fulfilled. #
Release the electric parking brake manually.
007A
0025
00E5
Inoperative See Operator's
Manual *
EBD, ABS and ESP ®
are malfunctioning.
Other driving sy stems and driving saf ety sy stems may also malfunction. &
WARNING Risk of skidding if EBD, ABS and ESP ®
are malfunctioning
If EBD, ABS and ESP ®
are malfunctioning, the wheels can lock when braking and ESP ®
cann otcar ryout vehicle
st abilization.
The steering capability and braking characteristics are thus se verely impaired. The br aking distance in an emer‐
ge ncy braking situation can increase. In addition, other driving saf ety sy stems are switched off. #
Drive on carefull y. Displ
aymessa ges and warning/indicator lamps 423
Page 451 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions
Reversing Not Possible
Service Required #
Visit a qualified specialist workshop.
Auxiliary Battery Malfunc-
tion *T
he auxiliary batteryforth e transmission is no longer being charge d. #
Visit a qualified specialist workshop. #
Untilthen, manually set the transmission toposition 005Dbefore you swit choff the engine. #
Before leaving theve hicle, apply the electric parking brake.
N Permanently Active Risk
of Rolling Away *
While theve hicle is rolling or while you are driving, the transmission has been shif tedto position 005C. #
Depress the brake pedal tostop and, when theve hicle is stationar y,shift the transmission toposition 005D. #
Tocontinue your journe y,shift the transmission toposition 005Bor005E.
Only Shift to 'P' when Vehi-
cle is Stationary *
The transmission can only be shif tedto position 005Dwhen theve hicle is stationar y.
Driver's Door Open &
Transmission Not in P Risk
of Vehicle Rolling Away *
The driver's door is not fully closed and the transmission is in position 005E,005Cor005B. #
Shift the transmission toposition 005Dwhen you park theve hicle.
To Engage Transmiss. Posi-
tion R First Depress the
Brake *
You ha vetried toswitch totransmission position 005E. #
Dep ress the brake pedal. #
Shift the transmission toposition 005E.
Shift to 'P' *
Shift the selector le verto position 005D. Display messages and
warning/indicator lamps 449
Page 467 of 518
003E003D
Tu
rn signal lights(→ page112)
005E Re
ar fog light(→ page111 )
0075 Re
stra int sy stem(→ page 465)
00E9 Seat belt not
fastened(→ page470)
0027 US
A: brakes (red) (→ page 465)
004D Canada: brakes (red) (→
page 465)
0024 Electric parking brake (yell
ow)
( → page 465)
0049 USA: elect
ric pa rking brake applied
(red) (→ page 465) 0024
Canada: elect
ric pa rking brake
applied (red) (→ page 465)
0025 ABS malfunctioning(→
page 465)
00E5 ESP®
(→ page 465)
00BB ESP®
OFF(→ page 465)
L Distance warning(→ page471)
00CC Po
we r-assis tedsteering malfunction‐
ing( →page 476)
00CC AIRMATIC/Active Body Control mal‐
functioning (→
page 471) 00B9
Che
ckEngine(→ page 472)
003D Electrical malfunction (→
page 472)
00B6 Fu
elreser vewith fuel filler flap loca‐
tion indicator (→ page472)
(→ page 472)
00AC Coolant
too hot/cold (→ page472)
0077 Ti
re pressure monitoring sy stem
(→ page 474) Sa
fet y sy stems Wa
rning/indicator lamp
Possible causes/consequences and 0050 0050Solutions
0027 Brake warning lamp (USA)
004D The
red brake sy stem warning lamp is lit while the engine is running.
Po ssible causes are:
R The brake forc e boosting is malfunctioning and the braking characteristics may be af fected.
R The reis insuf ficient brake fluid in the brake fluid reser voir. &
WARNING Risk of accident and inju ryif brake forc e boosting is malfunctioning
If brake forc e boosting is malfunctioning, increased brake pedal forc e may be necessary for braking. The braking
ch aracteristics may be impaired. The braking dis tance can increase in eme rgency braking situations. Display messages and
warning/indicator lamps 465