2019 MERCEDES-BENZ S-CLASS CABRIOLET air condition

#
Remo vecap 1bytheta b, place on the edge
of thefiller opening and engage in place. #
Addwa sher fluid. Ke
eping the air-water duct free #
Keep the area between the hood and the
windshield free of deposits, e.g. ice, sn ow
and lea ves. Cleaning and care
Note
s onwashing theve hicle in a car wash &
WARNING Risk of accident due to
re duced braking ef fect af terwa shing the
ve hicle
The braking ef fect is reduced af terwa shing
th eve hicle. #
Afterth eve hicle has been washed,
brake carefully while paying attention to
th e traf fic conditions until the braking
ef fect has been ful lyrestored. *
NO
TEDama gedue tounsuitable car
wa sh #
Before driving into a car wash make
sure that the car wash is suitable for
th eve hicle dimensions. #
Ensure there is suf ficient ground clear‐
ance between the underbody and the
guide rails of the car wash. #
Ensure that the clearance width of the
car wash, in particular the width of the
guide rails, is suf ficient. To
avo id damage to yourvehicle when using a
car wash, ensure thefo llowing beforehand:
R toavoid possible water ingress in theve hicle,
it is preferable touse car washes which allow
th e high-pressure pre-cleaning tobe deacti‐
va ted (specification forth e con vertible pro‐
gram).
R it is imperative toavo id a subsequent hot-
wa x treatment.
R remo vethe SmartK eyin order toensure that
th e wind deflector on the windshield retracts.
R Active Dis tance Assi stDISTRONIC and the
HOLD function are deactivated.
R the 360° Camera or there ar view camera is
swit ched off.
R the side windo wsand soft top are closed
comple tely.
R the blo werfo rth eve ntilation/heating is
switched off. Maintenance and care
343

Obser
vethefo llowing information: Cleaning
Avoiding dama getothe decorative foil
R For cleaning, use plenty of water and a mild cleaning agent without
additives or abrasive substances, e.g. a car sha mpoo appr ovedfor
Mercedes-Benz.
R Remo vedirt immediately, where possible, whilst avoiding rubbing
to o hard. There is otherwise a risk of damaging the decorative foil
ir re parably.
R Ifth ere is dirt on thefinish or if the decorative foil is dull: use the
Pa int Cleaner recommended and appr ovedfo r Mercedes-Benz.
R Insect remains: soak with insect remo ver and rinse off the treated
areas af terw ards.
R Bird droppings: soak with water and rinse off af terw ards.
R Toprev ent waterst ains, dry a foil-wrapped vehicle with a soft,
absorbent clo thafte reve rycar wash. R
The service life and color of decorative foils are impaired by:
- sunlight
- temp erature, e.g. hot air blo wer
- weather conditions
- stone chippings and dirt
- chemical cleaning agents
- oily products
R Do not use polish on matte decorative foil. Po lishing will ha vethe ef fect
of shining thefo il-wrapped sur face.
R Do not treat matte or stru ctured deco rative foils with wax.Pe rm anent
st ains may occur. Sc
ratches, cor rosive deposits, areas af fected by
cor rosion and damage caused byincor rect care
cannot al ways be comple tely repaired. In such
cases, visit a qualified specialist workshop.
Yo u can obtain more information on care and
cleaning products from the manufacturer. In
the case of foil-wrapped sur faces, optical dif‐
fe re nces may occur between the sur faces that
we renot pr otected bya decorative foil af ter
re moving a decorative foil. %
Have wo rkor repairs todecorative foils car‐
ri ed out at a qualified specialist workshop,
e.g. in an authorized Mercedes-Benz Center. 348
Maintenance and care

R
The tires may wearexc essively and/or
une venly, which may greatlyimpair tire
traction.
R The driving characteristics, as well as
st eering and braking, may be greatly
impaired. #
Comply with there commended tire
pressure and check the tire pressure of
all tires including the spare wheel regu‐
larly:
R at least once a month
R when the load changes
R before embarking on a lon ger journey
R if operating conditions change, e.g. off-
ro ad driving #
Adjust the tire pressure as necessar y.Driving wi
thtire pressu rethat is too high or too
low can:
R Sho rten the service life of the tires.
R Cause increased tire damage. R
Adversely af fect driving characteristics and
th us driving saf ety, e.g. due to hydroplaning. &
WARNING Risk of an accident due to
insuf ficient tire pressure
Ti re s with pressure that is too low can over‐
heat and bur stas a result.
In addition, they also suf fer from excessive
and/or ir regular wear, which can significantly
impair the braking properties and the han‐
dling characteristics. #
Avoid excessively low tire pressures in
all the tires, including the spare wheel. Ti
re pressure which is too low can cause:
R Tire defects as a result of overheating
R Impaired handling characteristics
R Irre gular wear
R Increased fuel consum ption &
WARNING Risk of accident from exces‐
sive tire pressure
Ti re s with excessively high pressure can
bu rst because they are damaged more easily
by highw ayfill, pot holes etc.
In addition, they also suf fer from ir regular
we ar, which can significantly impair the brak‐
ing properties and the handling characteris‐
tics. #
Avoid excessively high tire pressures in
all the tires, including the spare wheel. Excessively high tire pressure can
result in:
R Increased braking dis tance
R Impaired handling characteristics
R Irre gular wear
R Impaired driving com fort
R Susceptibility todamage 378
Wheels and tires

The tire pressure
table sho ws there commended
tire pressure for all tires appro vedfo rth is vehi‐
cle. The recommended tire pressures apply for
cold tires under various operating conditions, i.e.
loading and/or speed of theve hicle.
If one or more tire sizes precede a tire pressure,
th e tire pressure information following is only
va lid forth ose tire sizes.
The load conditions "partially laden" and "fully
laden" are defined in theta ble for dif fere nt num‐
be rs of passengers and amounts of luggage. The
actual number of seats may dif fer from this. Some tire pressure
tables only show therim
diame ter ins tead of the comple tetire size, e.g.
R18. The rim diame ter is part of the tire size and
can be found on the tire side wall (→ page 391).
Be sure toalso obse rveth efo llowing fur ther
re lated subjects:
R Notes on tire pressure (→ page377)
R Tire and Loading In form ation placard
(→ page 384) R
Maximum tire pressure (→ page 390) Checking tire pressu
res manually #
Read the tire pressure forth e cur rent operat‐
ing conditions from theTire and Loading
In fo rm ation placard or the tire pressure
ta ble. Obser vethe no tes on tire pressure. #
Remo vetheva lve cap of the tire tobe
ch ecked. #
Press the tire pressure gauge securely on to
th eva lve. #
Read the tire pressure. #
Ifth e tire pressure is lo werth an there com‐
mended value, inc rease the tire pressure to
th ere commended value. #
Ifth e tire pressure is higher than there com‐
mended value, release air. Todo so, press
down the me tal pin in theva lve, e.g. using
th e tip of a pen forex ample. Then check the
tire pressu reagain using the tire pressure
ga uge. #
Screw theva lve cap onto theva lve. 380
Wheels and tires

The sy
stem checks the tire pressure and the tire
te mp erature of the tires ins talled on theve hicle
by means of a tire pressu resensor.
New tire pressure sensors, e.g. in winter tires,
are automatically taught-in during thefirs t jour‐
ney they are used.
If th ere is a subs tantial pressure loss or if the
tire temp erature is excessive, you will be warned
in thefo llowing ways:
R via display messa ges (→ page 450)
R viathe0077 warning lamp in the instrument
clus ter (→ page 474)
The tire pressu remonitoring sy stem is only an
aid. It is the driver's responsibility toset the tire
pressure tothere commended cold tire pressure
suitable forth e operating situation. Set the tire
pressure for cold tires using a tire pressu re
ga uge. Notethat the cor rect tire pressure forthe
cur rent operating situation mu stfirs t be taught-
in to the tire pressure monitoring sy stem.
In most cases, the tire pressure monitoring sys‐
te m will auto maticallyupdate the new refere nce
va lues af teryo u ha vechanged the tire pressure.
Yo u can, ho wever,also update there fere nce val‐ ues
byrestarting the tire pressure monitoring
sy stem manually (→ page 383).
Sy stem limitations
The sy stem may be impaired or may not function
in thefo llowing situations:
R Ifth e tire pressure is set incor rectly
R Ifth ere is a sudden pressure loss caused, for
ex ample, byafo re ign object penetrating the
tire
R Ifth ere is a malfunction caused byano ther
ra dio signal source
Make sure toobser vethefo llowing fur ther rela‐
te d subjec t:
R Notes on tire pressure (→ page377)
Che cking the tire pressure with the tire pres‐
sure moni toring sy stem
Requ irements:
R The ignition is switched on. On-board computer:
, Service .
Tires
One of thefo llowing displa ysappears:
R Cur rent tire pressure of ea chwheel:
R Tire pressure will be displayed after driving a
few minutes
R Tire Pressure Monitor Active: thete ach-in
process of the sy stem is not yet comple te.
The tire pressure are already being moni‐
to re d. #
Compare the tire pressure with there com‐
mended tire pressure forth e cur rent operat‐
ing condition (→ page 379). Obser vethe
no tes on tire temp erature (→ page377).
% The values displa yed in the multifunction dis‐
play may deviate from those of the tire pres‐
sure gauge as they referto sea le vel.At high
altitudes, the tire pressure value indicated by
a pressure gauge are higher than those
shown bythe on-board computer. In this
case, do not reduce the tire pressure. 382
Wheels and tires

Un
iform Tire Quality Grading Standards: a
uniform standard tograde thequ ality of tires
with rega rd totread qualit y,tire traction and
te mp erature characteristics. The quality grading
assessment is made bythe manufacturer follow‐
ing specifications from theU. S. go vernment. The
qu ality grade of a tire is imprinted on the side
wa ll of the tire.
Re commended tire pressu re:there commen‐
ded tire pressure is the tire pressure specified
fo rth e tires mounted totheve hicle at thefa c‐
to ry.
The tire and information table con tains there c‐
ommended tire pressures for cold tires, the max‐
imum permissible load and the maximum per‐
missible vehicle speed.
The tire pressure table con tains there commen‐
ded tire pressures for cold tires under various
operating conditions, i.e. loading and/or speed
of theve hicle.
Increased vehicle weight due tooptional
equipment: the combined weight of all standard
and optional equipment available forth eve hicle, re
ga rdless of whe ther it is actually ins talled on
th eve hicle or not.
Rim: the part of the wheel on which the tire is
ins talled.
GA WR (Gross Axle Weight Rating): the GAWR
is the maximum permissible axle load. The
actual load on an axle must ne verexc eed the
gross axleweight rating. The gross axle weight
ra ting can be found on theve hicle identification
plate on the B‑pillar on the driver's side.
Speed rating: the speed rating is pa rtof the tire
identification. It specifies the speed range for
which a tire is appr oved.
GV W (Gross Vehicle Weight): the gross vehicle
we ight comprises thewe ight of theve hicle
including fuel, tools, the spare wheel, accesso‐
ri es ins talled, occupants, luggage and the trailer
dr aw bar nose weight, if applicable. The gross
ve hicle weight must not exceed the gross vehicle
we ight rating GVWR as specified on theve hicle
identification plate on the B‑pillar on the driver's
side.
GV WR (Gross Vehicle Weight Rating): the
GV WR is the maximum permitted gross weight of
the fully laden vehicle (weight of theve hicle
including all accessories, occupants, fuel, lug‐
ga ge and the trailer dr awbar nose weight if appli‐
cable). The grossvehicle weight rating is speci‐
fi ed on theve hicle identification plate on the
B‑pillar on the driver's side.
Maximum weight of the laden vehicle: the
maximum weight is the sum of the curb weight
of theve hicle, thewe ight of the accessories, the
maximum load and thewe ight of optional equip‐
ment ins talled at thefa ctor y.
Kilopascal (kPa): metric unitfor tire pressu re.
6.9 kPa cor responds to1 psi. Ano ther unit for
tire pressu reis bar. 100 kilopascal (kPa) equals
1 bar.
Load index: in additiontothe load-bearing
index, the load index may also be imprinted on
th e side wall of the tire. This specifies the load-
bearing capacity of the tire more precisel y.
Curb weight: thewe ight of a vehicle with stand‐
ard equipment including the maximum capacity
of fuel, oil and coolant. It also includes the air
conditioning sy stem and optional equipment if 394
Wheels and tires

Display messages
Possible causes/consequences and 0050
0050Solutions
0049 (USA only)
0024 (Canada only)
Please Release Parking
Brake *
The red0049 (USA only) or 0024(Canada only) indicator lamp flashes.
The electric parking brake is applied while you are driving:
R A condition for auto matic release of the electric parking brake is not fulfilled (→ page152).
R You are per form ing emer gency braking using the electric parking brake (→ page153). #
Che ckthat the conditions for auto matic release of the electric parking brake are fulfilled. #
Release the electric parking brake manually.
007A
0025
00E5
Inoperative See Operator's
Manual *
EBD, ABS and ESP ®
are malfunctioning.
Other driving sy stems and driving saf ety sy stems may also malfunction. &
WARNING Risk of skidding if EBD, ABS and ESP ®
are malfunctioning
If EBD, ABS and ESP ®
are malfunctioning, the wheels can lock when braking and ESP ®
cann otcar ryout vehicle
st abilization.
The steering capability and braking characteristics are thus se verely impaired. The br aking distance in an emer‐
ge ncy braking situation can increase. In addition, other driving saf ety sy stems are switched off. #
Drive on carefull y. Displ
aymessa ges and warning/indicator lamps 423

Display messages
Possible causes/consequences and 0050
0050Solutions #
Have the brake sy stem checked immediately at a qualified specialist workshop. #
Drive on carefully. #
Visit a qualified specialist workshop immediatel y.
0027
(USA only)
004D (Canada only)
Check Brake Fluid Level *T
here is insuf ficient brake fluid in the brake fluid reser voir. &
WARNING Risk of an accident due tolow brake fluid le vel
If th e brake fluid le vel is too lo w,the braking ef fect and the braking characteristics may be impaired. #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and traf fic conditions.
Do not continue driving under any circums tances. #
Consult a qualified specialist workshop. #
Do not add brake fluid. #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and traf fic conditions. Do not
continue driving under any circums tances. #
Do not add brake fluid. #
Consult a qualified specialist workshop.
Radar Sensors Dirty See
Operator's Manual *T
heradar sensor sy stem is malfunctioning. Possible causes are:
R Dirt on the sensors
R Heavy rain or snow 424
Display messages and warning/indicator lamps