2019 MERCEDES-BENZ GLC climate settings

Roptimal fuel consumption resulting from theautomatic transmission shifting up sooner.The vehicle is driven in the low engine speedrange and the wheels are less likely to spin.
Rgliding mode is not available.
Rthe ECO start/stop function is activated(Ypage 136).
Drive program E (Economy)
Drive programEis characterized by the follow-ing:
Rthe vehicle exhibits particularly economicalhandling characteristics.
Rthe vehicle pulls away more gently in forwardand reverse gears, unless the acceleratorpedal is depressed fully.
Rthe vehicle has improved driving stability, forexample on slippery road surfaces.
Roptimal fuel consumption resulting from theautomatic transmission shifting up sooner.The vehicle is driven in the low engine speedrange and the wheels are less likely to spin.
Rduring deceleration, the engine is disconnec-ted from the drive train. The vehicle useskinetic energy and consumes less fuel.
Rthe cooling and heating output of the climatecontrol system has been reduced.
Rgliding mode is available.
Rthe ECO start/stop function is activated(Ypage 136).
Mercedes-AMG GLC 63 4MATIC+/GLC
63 S 4MATIC+
Drive program RACE (S‑MODEL)
TheRACEdrive program is characterized by thefollowing:
Rthe vehicle exhibits driving characteristicssuitable for the racetrack.
Rall vehicle systems are set for maximumsportiness.
Rthe gearshift recommendation gives youinformation for slowly warming up the driveassemblies and for adopting a fuel-efficientdriving style (Ypage 147). You can follow thegearshift recommendations at all times andshift gear accordingly using the steeringwheel paddle shifters. On the basis of thegearshift recommendation, using the steeringwheel paddle shifters, you can optimize the
drive train and engine operating mode at anytime.
Rif you have selected a gear manually, this willbe maintained until the vehicle speed increa-ses or decreases dramatically.
Rthe vehicle pulls away in first gear.
Rthe automatic transmission shifts up later.the fuel consumption possibly being higher asa result of the later automatic transmissionshift points.
Rthe suspension exhibits particularly hardspringing and damping settings.
Rgliding mode is not available.
Rthe ECO start/stop function is switched off(Ypage 136).
Drive program S+ (Sport Plus)
Drive programS+is characterized by the fol-lowing:
Rthe vehicle exhibits particularly sporty drivingcharacteristics.
Rthe vehicle pulls away in first gear.
Rthe automatic transmission shifts up later.the fuel consumption possibly being higher asa result of the later automatic transmissionshift points.
Rthe suspension exhibits particularly hardspringing and damping settings.
Rgliding mode is not available.
Rthe ECO start/stop function is switched off(Ypage 136).
Drive program S (Sport)
Drive programSis characterized by the follow-ing:
Rthe vehicle exhibits sporty driving character-istics.
Rthe vehicle pulls away in first gear.
Rthe automatic transmission shifts up later.the fuel consumption possibly being higher asa result of the later automatic transmissionshift points.
Rthe suspension exhibits stiff springing anddamping settings.
Rgliding mode is not available.
Rthe ECO start/stop function is switched off(Ypage 136).
146Automatic transmission
Driving and parking

Calling up the climate control bar
Multimedia system:
XSelectVehicleVehicle.The vehicle menu is displayed.
XSlide6the controller repeatedly until theclimate control bar is activated.
Calling up the climate control menu
Multimedia system:
XSelectVehicleVehicle.The vehicle menu is displayed.
XSlide6the controller repeatedly until theclimate control bar is activated.
XTo select from climate control barD: turnand press the controller.The menu for selecting the climate controlfunction is activated.
XTo select the climate control function: turnand press the controller.The selected climate control functionappears.
Settings in the climate menu
Adjusting the climate mode settings
The climate mode determines the type of air-flow. The setting is active when the air-condi-tioning system is set toX(Ypage 123).
XCall up the climate control menu(Ypage 273).
XTo selectClimate ModeClimate Mode: turn and press thecontroller.
XTo change the setting: turn the controller.
XTo exit the menu:press the8button.
The climate mode bar displays the current air-flow setting:DIFFUSEDIFFUSE,MEDIUMMEDIUMorFOCUSFOCUS.
Starting/stopping the perfume atomizer
The perfume atomizer makes it possible to scentthe air in individual compartments in the vehicleinterior. Further information (Ypage 127).
XCall up the climate control menu(Ypage 273).
XTo selectAirAirFreshenerFreshener: turn and press thecontroller.The setting element is active.
XTo start/stop the perfume atomizer: pressthe controller.
XTo set the intensity: turn the controller whenthe atomizer is switched on.
XTo exit the menu:press the8button.
Switching the ionization on/off
The ionization has a cleansing effect on the air inthe vehicle interior. Further information(Ypage 128).
XCall up the climate control menu(Ypage 273).
XTo selectIonizationIonization: turn and press thecontroller.The setting element is active.
XTo switch the ionization on or off: turn thecontroller.
XTo exit the menu:press the8button.
Settings in the bottom bar of the cli-
mate control menu
Switching cooling with air dehumidifica-
tion on/off
XCall up the climate control menu(Ypage 273).
XSlide6the controller repeatedly until thebottom bar is activated.
XTo selectssA/CA/C: turn and press the control-ler.
XSwitch cooling with air dehumidification onsor offS.
iThe current status of the cooling function isdisplayed in the climate control bar: A/C ON– activated, A/C OFF – deactivated.
iDeactivating the cooling with air dehumidi-fication function reduces fuel consumption.
Synchronizing the climate control set-
tings
UsessSyncSync(synchronization) to select the cli-mate control setting for all zones togethersorseparatelyS.
XCall up the climate control menu(Ypage 273).
XSlide6the controller repeatedly until thebottom bar is activated.
XTo selectssSyncSync: turn and press the con-troller.
XSwitch the synchronization function onsoroffS.
Operating system273
Multi media system
Z

For further information on synchronizing climatecontrol settings, see (Ypage 124).
Navigation mode
Important safety notes
GWARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle when driving, you may be distracted from
the traffic situation. You could also lose con-
trol of the vehicle. There is a risk of an acci-
dent.
Only operate this equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
You must observe the legal requirements for thecountry in which you are currently driving whenoperating the navigation system.
General notes
Among other things, correct functioning of thenavigation system depends on GPS reception. Incertain situations, GPS reception may beimpaired, there may be interference or theremay be no reception at all, e.g. in tunnels orparking garages.
The following descriptions apply to navigationwith COMAND. Further information can befound in the Digital Operator's Manual.
Selecting a route type and route options
Multimedia system:
XSelectNaviNavi{NavigationNavigation.
XSelectZ{Route SettingsRoute Settings.
iIf route guidance is active, first slide6thecontroller and show the menu.
XSelect a route type.
Notes for route types:
REco RouteEco Route
Calculates an economic route.
RDynamic Traffic RouteDynamic Traffic Route(only available inthe USA)
Traffic reports on the route for the route guid-ance are taken into account.
RCalculate Alternative RoutesCalculate Alternative Routes
Different routes are being calculated. InsteadofStartStart, select theContinueContinuemenu item.
XTo avoid/use route options:selectAvoidAvoid
OptionsOptions.
XSelect a route option.
Notes for route options:
RUse Toll RoadsUse Toll Roads
The route calculation includes roads whichrequire you to pay a usage fee (toll).
RUse Carpool LanesUse Carpool Lanes(only available in theUSA)
Prerequisite: your vehicle meets the accessconditions for carpool lanes.
Carpool lanes will be included if the carpoollanes option is activated.
Entering an address
Multimedia system:
XSelectNaviNavi{NavigationNavigation.
XSelectDestinationDestination{Address EntryAddress Entry.
iIf route guidance is active, first slide6thecontroller and show the menu.
Examples for entering an address are:
RCity or ZIP code, street, house number
RCountry, city or ZIP code
RCity or ZIP code, center
RStreet, city or ZIP code, intersection
XSelectCityCity.The city in which the vehicle is currently loca-ted (current vehicle position) is at the top.Below this, you will see locations for whichroute guidance has already been carried out.
XEnter the city.TheCsymbol: the location is contained onthe digital map multiple times.
XTo switch to the list:slide the5control-ler.
XSelect the location.If available, the ZIP code is shown. If there aredifferent ZIP codes available for the location,the corresponding digits are displayed with anXX.
XEnter the street and house number.The address is in the menu.
274Operating system
Multimedia system