or restricts a side window from travelingupwards during the automatic closing process,the side window opens again automatically.During the manual closing process, the sidewindow only opens again automatically afterthe corresponding switch is released. Theautomatic reversing feature is only an aid anddoes not relieve you of the responsibility topay attention when closing a side window.
GWARNING
The reversing feature does not react:
Rto soft, light and thin objects, e.g. fingers
Rwhile adjusting
This means that the reversing feature can-
not prevent someone being trapped in these
situations. There is a risk of injury.
Make sure that no body parts are in close
proximity during the closing procedure. If
someone becomes trapped, press the b
button to open the side window again.
Opening and closing the side win-
dows
The switches for all side windows are locatedon the driver's door. There is also a switch oneach door for the corresponding side window.
The switches on the driver's door take prece-dence.
CFront left
DFront right
XMake sure that all the side windows areclosed.
XMake sure that all the side windows and thepanorama roof with power tilt/sliding panelare closed.
On vehicles with a panorama roof with powertilt/sliding panel:
XTouch recessed sensor surface Con thedoor handle again until the roller sunblind ofthe panorama roof with power tilt/slidingpanel closes.
XTo interrupt convenience closing:releaserecessed sensor surface Con the doorhandle.
Resetting the side windows
If a side window can no longer be closed fully,you must reset it.
XClose all the doors.
XTurn the SmartKey to position Gor Hinthe ignition lock (Ypage 125).
XPull the corresponding switch on the doorcontrol panel until the side window is com-pletely closed (Ypage 84).
XHold the switch for an additional second.
If the side window opens again slightly:
XImmediately pull the corresponding switchon the door control panel until the side win-dow is completely closed (Ypage 84).
XHold the switch for an additional second.
XIf the respective side window remainsclosed after the button is released, then ithas been set correctly. If this is not thecase, repeat the steps above.
Problems with the side windows
GWARNING
If you close a side window again immediately after it has been blocked or reset, the side win-
dow closes with increased or maximum force. The reversing feature is then not active. Parts of
the body could be trapped in the closing area in the process. This poses an increased risk of
injury or even fatal injury.
Make sure that no parts of the body are in the closing area. To stop the closing process,
release the switch or push the switch again to reopen the side window.
86Side windows
Opening and closing