2019 MAZDA MODEL MX-5 MIATA RF check oil

[x] Cancel search: check oil

Page 114 of 553

MAZDA MODEL MX-5 MIATA RF 2019  Owners Manual Rocking the Vehicle
WA R N I N G
Do not spin the wheels at more than 56
km/h (35 mph), and do not allow anyone
to stand behind a wheel when pushing the
vehicle:
When the vehicle is stuck, spinning the

Page 352 of 553

MAZDA MODEL MX-5 MIATA RF 2019  Owners Manual Remarks:
*1 The engine oil and filter must be changed at least once a year or within 12,000km (7,500 miles) since last
engine oil and filter change. Re set the engine oil data whenever replacing the e

Page 353 of 553

MAZDA MODEL MX-5 MIATA RF 2019  Owners Manual Maintenance IntervalNumber of months or kilometers (miles), whichever comes first.
Months 6 1218243036424854606672
×1000 km 8 1624324048566472808896
×1000 miles 5 10 15 20 25 30 35 40 45 50 55 60
Dr

Page 355 of 553

MAZDA MODEL MX-5 MIATA RF 2019  Owners Manual Remarks:
*1 Use of FL-22 is recommended when replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.
*2 According to state/provincial

Page 357 of 553

MAZDA MODEL MX-5 MIATA RF 2019  Owners Manual Maintenance IntervalNumber of months or kilometers, whichever comes first
Months 6 1218243036424854606672
×1000 km 10 20 30 40 50 60 70 80 90 100 110 120
Tire (Rotation) Rotate every 10,000 km
Tire i

Page 359 of 553

MAZDA MODEL MX-5 MIATA RF 2019  Owners Manual *2 According to state/provincial and federal regulations, failure to perform maintenance on these items will notvoid your emissions warranties. However, Mazda recommends that all maintenance services

Page 360 of 553

MAZDA MODEL MX-5 MIATA RF 2019  Owners Manual Maintenance IntervalNumber of months or kilometers, whichever comes first
Months 39 42 45 48 51 54 57 60 63 66 69 72
×1000 km 65707580859095100105110115120
Washer fluid level IIIIII
Emergency flat ti

Page 366 of 553

MAZDA MODEL MX-5 MIATA RF 2019  Owners Manual ▼Closing the Hood
1. Check under the hood area to make
certain all filler caps are in place and
all loose items (e.g. tools, oil
containers, etc.) have been removed.
2. Lift the hood, grasp the padd
Page:   1-8 9-16 next >