ItemFeatureFactory Set‐
ting Available Set‐
tings Settings
Change
Method
Active driving display (page 4-56)
Display Setting can be changed so that the Active Driv‐
ing Display is not displayed.
On On/Off C ―
The display height (up/down position) can be
changed.
013 steps up/
down from ini‐
tial setting (total: 27 steps) C―
The method for adjusting the display bright‐
ness (automatically/manually) can be changed.
Auto Auto/Man. C ―
The standard brightness with the automatic
brightness adjustment can be changed. 02 steps up/down
from initial set‐ ting (total: 5
steps) C―
The standard brightness with the manual
brightness adjustment can be changed.
020 steps up/
down from ini‐
tial setting (total: 41 steps) C―
The display angle can be changed.
03steps up/down
from initial set‐ ting (total:7steps) C―
Navigation guid‐
ance
Display/non-display On On/Off C ―
*1 Though these systems can be tur
ned Off, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain On.
*2 Only the volume of the warning beep during Blind Spot Monitori ng (BSM) operation can be changed. The
volume of the warning beep durin g Rear Cross Traffic Alert (RCTA) operation cannot be changed.
*3 This system functions only when t he navigation system is functioning.*4 When the ultrasonic sensors detect an obstruction, the content s indicated on the center display switches to the
360°View Monitor. (Vehicles with 360°View Monitor)
*5 If the auto-wiper control is set to Off, the wiper lever position is set to in termittent operation.*6 If the setting is changed to O ff, the following operation is performed according to the headlight switch
position:
At position: Headlights turn off immediately after the ignition i s switched off.At any position other than : Headlights on/off conditions vary according to the headlight switch
position. Refer to Headlights on page 4-68.
*7 When set to 0 seconds, the lights-on reminder is operable.*8 The lights-on reminder settings can be changed at anytime, how ever, the lights-on reminder only operates
when the auto headlight function is set to Off. Refer to Lights-On Reminder on page 7-46.
*9 Change the ambient light illumin ation level with the parking lights or headlights turned on.*10 When set to OFF, the ambient lights remain turned off regardless of whether or not the parking lights or
headlights are on or off. However, they will turn on or off in conjunction with the illuminated entry system.
Specifications
Personalization Features
9-16
CX-9_8HB2-EA-18G_Edition1 2018-5-11 13:09:27
