2019 MAZDA MODEL CX-5 SKYACTIV-D lights

[x] Cancel search: lights

Page 503 of 721

MAZDA MODEL CX-5 SKYACTIV-D 2019  Owners Manual (Type B)
The illumination entry system does not
operate in conjunction with the
overhead lights when the overhead
lights are turned on using the overhead
light ON/OFF switch.Accessory Sockets
Only

Page 519 of 721

MAZDA MODEL CX-5 SKYACTIV-D 2019  Owners Manual ▼Schedule 2
U.S.A. and Puerto Rico residents - Severe
 driving conditions maintenance interval
Maintenance Interval Number of months or kilometers (miles), whichever comes first.
Months 6 1218243036

Page 521 of 721

MAZDA MODEL CX-5 SKYACTIV-D 2019  Owners Manual *9 Check the tire repair fluid expiration date every year when performing the periodic maintenance. Replace thetire repair fluid bottle with new  one before the expiration date.
 
Canada residents
Mai

Page 525 of 721

MAZDA MODEL CX-5 SKYACTIV-D 2019  Owners Manual ▼Schedule 2
Maintenance Interval Number of months or kilometers, whichever comes first
Months 3 6 9 121518212427303336
×1000 km 5 1015202530354045505560
Drive belts I
Engine oil & filter 
*1RRRRRRR

Page 526 of 721

MAZDA MODEL CX-5 SKYACTIV-D 2019  Owners Manual Chart symbols:
I: Inspect: Inspect and clean, repair, ad just, fill up, or replace if necessary.
R:  Replace
L:  Lubricate
C:  Clean
T:  Tighten
D:  Drain
Remarks:
*1 Reset the engine oil data wheneve

Page 563 of 721

MAZDA MODEL CX-5 SKYACTIV-D 2019  Owners Manual Light Bulbs
Side turn signal 
lights
Vanity mirror 
lights
Type A
Type B
Overhead lights/Front map 
lights
Side turn 
signal lights
Vanity mirror lights
Overhead lights/Front map 
lights Front turn si

Page 564 of 721

MAZDA MODEL CX-5 SKYACTIV-D 2019  Owners Manual CAUTION
When removing the lens or lamp unit using
a flathead screwdriver, make sure that the
flathead screwdriver does not contact the
interior terminal. If the flathead screwdriver
contacts the termi

Page 565 of 721

MAZDA MODEL CX-5 SKYACTIV-D 2019  Owners Manual 3. Pull the center of each plastic retainerusing a flathead screwdriver and
remove the retainers, and then partially
peel back the over fender.
Removal
Installation
4. Pull the center of each plastic