2019 MAZDA MODEL CX-30 height

¾Do not adhere stickers (including
transparent stickers) to the surface of
the radiator grille and front emblem
in and around the front radar sensor,
and do not replace the radiator grille
and front emblem with any product
that is not a genuine product
designed for use with the front radar
sensor.
¾The front radar sensor includes a
function for detecting soiling of the
radar sensor's front surface and
informing the driver, however,
depending on the conditions, it may
require time to detect or it may not
detect plastic shopping bags, ice or
snow. If this occurs, the system may
not operate correctly, therefore
always keep the front radar sensor
clean.
¾Do not install a grille guard.
¾If the front part of the vehicle has
been damaged in a vehicle accident,
the position of the front radar sensor
may have moved. Stop the system
immediately and always have the
vehicle inspected at an expert
repairer (we recommend an
Authorised Mazda Repairer).
¾Do not use the front bumper to push
other vehicles or obstructions such
as when pulling out of a parking
space. Otherwise, the front radar
sensor could be hit and its position
deviated.
¾Do not remove, disassemble, or
modify the front radar sensor.
¾For repairs, replacement or paint
work around the front radar sensor,
consult an expert repairer (we
recommend an Authorised Mazda
Repairer).¾Do not modify the suspensions. If
the suspensions are modified, the
vehicle's posture could change and
the front radar sensor may not be
able to correctly detect a vehicle
ahead or an obstruction.
NOTE
xUnder the following conditions, the
front radar sensor may not be able to
detect vehicles ahead or obstructions
correctly and each system may not
operate normally.
xThe rear surface of a vehicle ahead
does not reflect radio waves
effectively, such as an unloaded
trailer or an automobile with a
loading platform covered by a soft
top, vehicles with a hard plastic
tailgate, and round-shaped
vehicles.
xVehicles ahead with low vehicle
height and thus less area for
reflecting radio waves.
xVisibility is reduced due to a
vehicle ahead casting
off water,
snow, or sand from its tyres and
onto your windscreen.
xThe luggage compartment is
loaded with heavy objects or the
rear passenger seats are occupied.
xIce, snow, or soiling is on the front
surface of the front emblem.
xDuring inclement weather such as
rain, snow, or sand storms.
xWhen driving near facilities or
objects emitting strong radio
waves.
xUnder the following conditions, the
front radar sensor may not be able to
detect vehicles ahead or
obstructions.
xThe beginning and end of a curve.xRoads with continuous curves.
When Driving
i-ACTIVSENSE
4-221

NOTE
xThe detection ability of the front side
radar sensor has limitations. In the
following cases, the detection ability
may lower and the system may not
operate normally.
xThe front bumper near the front
side radar sensor has become
deformed.
xSnow, ice or mud adheres to the
front side radar sensor on the front
bumper.
xUnder bad weather conditions
such as rain, snow and fog.
xUnder the following conditions, the
front side radar sensor cannot detect
target objects or it may be
difficult to
detect them.
xSmall motorcycles, bicycles,
pedestrians, animals, shopping
carts, and stationary objects on a
road or a road side.
xVehicle shapes which do not
reflect radar waves well such as
empty trailers with a low vehicle
height and sports cars.
xVehicles are shipped with the
direction of the front side radar
sensor adjusted for each vehicle to a
loaded vehicle condition so that the
front side radar sensor detect
approaching vehicles correctly. If the
direction of the front side radar
sensor has deviated for some reason,
have the vehicle inspected at an
expert repairer (we recommend an
Authorised Mazda Repairer).
xFor repairs or replacement of the
front side radar sensor, or bumper
repairs, paintwork, and replacement
near the radar sensors, consult an
expert repairer (we recommend an
Authorised Mazda Repairer).
xThe radar sensors are regulated by
the relevant radio wave laws of the
country in which the vehicle is
driven. If the vehicle is driven
abroad, authorization from the
country in which the vehicle is driven
may be required.
When Driving
i-ACTIVSENSE
4-223

Rear Side Radar Sensor*
▼Rear Side Radar Sensor
Your vehicle is equipped with rear side
radar sensor. The following systems
also use the rear side radar sensor.
xBlind Spot Monitoring (BSM)xRear Cross Traffic Alert (RCTA)xSmart Brake Support [Rear Crossing]
(SBS-RC)
The rear side radar sensors emit radio
waves and detect the radio waves
reflected off a vehicle approaching
from the rear or an obstruction.
1. Rear side radar sensor

The rear side radar sensors are installed
inside the rear bumper, one on each
side.
Always keep the surface of the rear
bumper near the rear side radar
sensors clean so that they operate
normally. Also, do not apply items such
as stickers.
Refer to Exterior Care on page 6-54.
CAUTION
If the rear bumper receives a severe
impact, the system may no longer
operate normally. Stop the system
immediately and have the vehicle
inspected at an expert repairer (we
recommend an Authorised Mazda
Repairer).
NOTE
xThe detection ability of the rear side
radar sensor has limitations. In the
following cases, the detection ability
may lower and the system may not
operate normally.
xThe rear bumper near the rear side
radar sensor has become
deformed.
xSnow, ice or mud adheres to the
rear side radar sensor on the rear
bumper.
xUnder bad weather conditions
such as rain, snow and fog.
xUnder the following conditions, the
rear side radar sensor cannot detect
target objects or it may be
difficult to
detect them.
xSmall motorcycles, bicycles,
pedestrians, animals, shopping
carts, and stationary objects on a
road or a road side.
xVehicle shapes which do not
reflect radar waves well such as
empty trailers with a low vehicle
height and sports cars.
xVehicles are shipped with the
direction of the rear side radar
sensor adjusted for each vehicle to a
loaded vehicle condition so that the
rear side radar sensor detect
approaching vehicles correctly. If the
direction of the rear side radar
sensor has deviated for some reason,
have the vehicle inspected at an
expert repairer (we recommend an
Authorised Mazda Repairer).
xFor repairs or replacement of the rear
side radar sensor, or bumper repairs,
paintwork, and replacement near the
radar sensors, consult an expert
repairer (we recommend an
Authorised Mazda Repairer).
When Driving
i-ACTIVSENSE
4-224*Some models.

support rod hole indicated by the
arrow to hold the bonnet open.

1. Pad
2. Support rod
▼Closing the Bonnet
CAUTION
>&
SKYACTIV-X 2.0)
Do not close the bonnet with the
engine cover open. Otherwise, the
engine cover may fall and cause injury.
For the opening/closing of the engine
cover, refer to the “Engine
Compartment Overview” 6-19.
1. Check under the bonnet area to
make certain all
filler caps are in
place and all loose items (e.g.
tools, oil containers, etc.) have
been removed.
2. Lift the bonnet, grasp the padded
area on the support rod, and secure
the support rod in the clip. Verify
that the support rod is secured in
the clip before closing the bonnet.

1. Clip

3. Lower the bonnet slowly to a height
of about 20 cm (7.9 in) above its
closed position and then let it drop.
CAUTION
When closing the bonnet, do not push
it excessively such as by applying your
weight. Otherwise, the bonnet could
be deformed.
Maintenance and Care
Owner Maintenance
6-18

Replace the tyre when this happens.
1. New tread
2. Worn tread
3. Tread wear indicator
You should replace the tyre before the
band crosses the entire tread.
▼Replacing a Wheel
WARNING
Always use wheels of the correct size
on your vehicle:
Using a wrong-sized wheel is
dangerous. Braking and handling could
be affected, leading to loss of control
and an accident.
CAUTION
A wrong-sized wheel may adversely
affect:
¾Ty re
fit
¾Wheel and bearing life
¾Ground clearance
¾Snow-chain clearance
¾Speedometer calibration
¾Headlight aim
¾Bumper height
¾Tyre Pressure Monitoring System
*
NOTE
xWhen replacing a wheel, make sure
the new one is the same as the
original factory wheel in diameter,
rim width, and offset (inset/outset).
xFor details, contact an expert repairer
(we recommend an Authorised
Mazda Repairer).

Proper tyre balancing provides the best
riding comfort and helps reduce tread
wear. Out-of-balance tyres can cause
vibration and uneven wear, such as
cupping and
flat spots.
Maintenance and Care
Owner Maintenance
*Some models.6-43

Item Capacity
Fuel tankFWD51.0 L (13.5 US gal, 11.2 Imp
gal)
AWD48.0 L (12.7 US gal, 10.6 Imp
gal)
Check oil and
fluid levels with dipsticks or reservoir gauges.
▼Dimensions
Item Vehicle specification
Overall length 4,395 mm (173.0 in)
Overall width 1,795 mm (70.7 in)
Overall height 1,540 mm (60.6 in)
Front tread 1,565 mm (61.6 in)
Rear tread 1,565 mm (61.6 in)
Wheelbase 2,655 mm (104.5 in)
▼Light Bulbs
The LED bulb cannot be replaced. Consult an expert repairer (we recommend an
Authorised Mazda Repairer) when the replacement is necessary.
Exterior light
Light bulbCategory
Wattage
UN-R*1 (SAE)
xHeadlightsxPosition lightsxFront direction indicator lightsxSide direction indicator lightsxHigh-mount brake lightxRear direction indicator lightsxBrake lightsxTail lightsxReverse lights
xRear fog light*
xNumber plate lightsLEDŠ (Š)
Running lights
*LED type LEDŠ (Š)
Bulb type
21
*2W21/5W (7444)
*1 UN-R stands for United Nations Regulation.*2
Double-filament light bulb, however, only 21 W
filament bulb is used in the running lights.
Specifications
Specifications
*Some models.9-9