2019 MAZDA MODEL CX-30 lights

xThe target object enters the blind
spot of the Forward Sensing
Camera (FSC).
xA person or object bursts onto the
road from the shoulder or cuts
right in front of you.
xYou change lanes and approach a
vehicle ahead.
xWhen driving extremely close to
the target object.
xTyre chains or a temporary spare
tyre is installed.
xThe vehicle ahead has a special
shape. For example, a vehicle
towing a trailer house or a boat, or
a vehicle carrier carrying a vehicle
with its front pointed rearward.
xIf the Forward Sensing Camera (FSC)
cannot operate normally due to rain,
backlight, or fog , the system
functions related to the Forward
Sensing Camera (FSC) are
temporarily stopped and the
following warning lights turn on.
However, this does not indicate a
malfunction.
xHigh Beam Control System (HBC)
warning indication/warning light
(amber)
xAdaptive LED Headlights (ALH)
warning indication/warning light
(amber)
xi-ACTIVSENSE warning indication/
warning light
xIf the Forward Sensing Camera (FSC)
cannot operate normally due to high
temperatures, the system functions
related to the Forward Sensing
Camera (FSC) are temporarily
stopped and the following warning
lights turn on. However, this does
not indicate a malfunction. Cool
down the area around the Forward
Sensing Camera (FSC) such as by
turning on the air conditioner.
xHigh Beam Control System (HBC)
warning indication/warning light
(amber)
xAdaptive LED Headlights (ALH)
warning indication/warning light
(amber)
xi-ACTIVSENSE warning indication/
warning light
xIf the Forward Sensing Camera (FSC)
detects that the windscreen is dirty
or foggy, the system functions related
to the Forward Sensing Camera
(FSC) are temporarily stopped and
the following warning lights turn on.
However, this does not indicate a
problem. Remove the dirt from the
windscreen or press the defroster
switch and defog the windscreen.
xHigh Beam Control System (HBC)
warning indication/warning light
(amber)
xAdaptive LED Headlights (ALH)
warning indication/warning light
(amber)
xi-ACTIVSENSE warning indication/
warning light
xIf there are recognizable cracks or
damage caused by
flying gravel or
debris on the windscreen, always
have the windscreen replaced.
Consult an expert repairer (we
recommend an Authorised Mazda
Repairer) for replacement.
xThe Forward Sensing Camera (FSC)
recognises pedestrians when all of
the following conditions are met:
xThe height of a pedestrian is about
1 to 2 meters.
xAn outline such as the head, both
shoulders, or the legs can be
determined.
xIn the following cases, the Forward
Sensing Camera (FSC) may not be
able to detect target objects
correctly:
When Driving
i-ACTIVSENSE
4-219

Front Camera/Side
Cameras/Rear Camera
*
▼Front Camera/Side Cameras/Rear
Camera
Your vehicle is equipped with a front
camera, side cameras, and a rear
camera. The 360°View Monitor uses
each camera.
Refer to 360°View Monitor on page
4-185.
The front camera, side cameras, and
rear camera shoot images of the area
surrounding the vehicle.
Each camera is installed to the
following positions.
1. Side cameras
2. Front camera
3. Rear camera
Driver Monitoring
Camera
*
▼Driver Monitoring Camera
The driver monitoring camera detects
changes in the driver's facial features
and estimates the amount of
accumulated fatigue and sleepiness of
the driver.
1. Driver monitoring camera
NOTE
xDriver Monitoring (DM) and the
earlier collision warning may not
operate normally under the following
conditions.
xThe driver monitoring camera is
covered with something.
xYou are driving the vehicle while
leaning on the steering wheel.
xYou are wearing glasses or
sunglasses.
xA cap or hat you are wearing
partially blocks the driver
monitoring camera's view of your
eyes, you have long bangs partially
covering your eyes, or a part of
your face is invisible due to a face
mask.
xThe lighting conditions change
significantly (such as backlight,
light from the side, or direct light
from the setting sun, and the
headlights of on-coming vehicles).
When Driving
i-ACTIVSENSE
4-226*Some models.

xWhen the temperature around the lens is high/low.xWhen the camera is wet such as on a rainy day or during periods of high
humidity.
xWhen foreign material such as mud is stuck around the camera.xWhen the camera lens reflects sunlight or headlight beams.xThe surroundings are illuminated by vehicle lights, fluorescent lights, or LED
lights (display may flicker).
xExtremely small dark or white dots appear on the screen (dots may flicker).xImage display may be delayed if the temperature around the camera is low.
▼Viewing the Display
Predicted vehicle path assist lines display type
The projected path guidance mode displays the predicted path of the vehicle after
you turn the steering wheel.
Use this mode for parking your vehicle in a parking space or garage.
a) Projected vehicle path (yellow)
These lines are displayed as a reference for the projected path of the vehicle.
The lines displaying the projected vehicle path change after you turn the steering
wheel.
b) Extended vehicle width lines (blue)
These lines indicate the vehicle's extended width.
These lines are not displayed when the vehicle's wheels are in the straight-ahead
position.
c) Distance guide lines (red)
These lines indicate the approximate distance to a point measured from the
vehicle's rear (from the end of the bumper).
The blue line indicates the point about 50 cm (19 in) from the rear bumper.
The red and yellow lines, which change position after you turn the steering wheel,
indicate the points about 50 cm (19 in) for the red line and 100 cm (39.3 in) for
the yellow lines from the rear bumper (at the centre point of each of the lines).
A degree of error occurs when the wheels are not in the straight-ahead position.
In the above illustration, the right side of the vehicle is in a position closer to the
actual distance displayed by the distance guide lines (red: about 50 cm (19 in)
When Driving
Rear View Monitor
4-241

5Interior Features
Use of various features for ride comfort, including air-
conditioning system and audio system.
Air-Conditioning System............ 5-2
Operating Tips....................... 5-2
Vent Operation......................5-3
Manual Type..........................5-5
Fully Automatic Type.............. 5-9
Mazda Connect...................... 5-13
What is Mazda Connect ?.....5-13
Mazda Connect Basic
Operations.......................... 5-17
Interior Equipment.................. 5-32
Sunvisors............................. 5-32
Interior Lights...................... 5-33
Accessory Sockets................ 5-35
Cup Holder......................... 5-36
Bottle Holder.......................5-38
Assist Grips......................... 5-38
Rear Coat Hooks................. 5-39
Storage Compartments........ 5-39
Removable Ashtray
*............. 5-42
*Some models.5-1

Interior Lights
▼Interior Lights
NOTE
Do not leave the lights on for long
periods while the engine is turned off.
Otherwise the battery power could be
depleted.
Overhead lights
Front
1. Indicator light

Switch Overhead Lights
ON/OFFPress the switch to turn it on.
Press the switch again to turn off
the lights.
Switch Overhead Lights
DOOR OFFThe door interlock can be switch-
ed ON/OFF.
When the door interlock is OFF,
the indicator light in the switch
turns on.

Door interlock ON (indicator
light in switch is off)
xThe lights turn on when any of
the doors is opened.
xThe lights turn on/off in con-
junction with the illuminated
entry system.
Door interlock OFF (indicator
light in switch is on)
xThe lights do not turn on even
if any of the doors is opened.
xThe lights do not turn on/off in
conjunction with the illuminat-
ed entry system.

Rear
NOTE
The rear overhead light also turn on
and off when the front overhead light
switch is operated.
Interior Features
Interior Equipment
5-33

Map lights
Front
Press the switch to illuminate the front
map lights, and then press the switch
again to turn them off.
NOTE
The front map lights will not turn
off
even if the switch is pressed in the
following cases:
xThe overhead lights turn on by
operating the overhead light
ON/OFF switch (
).xThe overhead lights turn on in
conjunction with a door opening/
closing.
xThe illuminated entry system is on.
Rear
*
When the overhead light ON/OFF
switch (
) is off, press the switch to
illuminate the rear map lights, and
then press the switch again to turn
them off.
NOTE
xOnce the rear map lights have been
turned off, they will turn on and off
in conjunction with the overhead
light operation.
xThe rear map lights will not turn
off
even if the switch is pressed in the
following cases:
xThe overhead lights turn on by
operating the overhead light
ON/OFF switch (
).xThe overhead lights turn on in
conjunction with a door opening/
closing.
xThe illuminated entry system is on.
Luggage compartment light
The luggage compartment light is on
when the liftgate is open and
off when
it is closed.
NOTE
Do not leave the liftgate open for long
periods while the engine is turned
off.
Otherwise the battery power could be
depleted.
▼Illuminated Entry System
The overhead lights turn on when any
of the following operations is done
with the overhead light switch in the
DOOR position.
Interior Features
Interior Equipment
5-34*Some models.

xThe driver's door is unlocked with
the ignition is switched OFF.
xThe ignition is switched OFF with all
doors closed.
NOTE
xThe illumination time differs
depending on the operation.
xThe vehicle is equipped with a
battery saver. If an interior light is left
on with the ignition switched OFF,
the light is turned off automatically
after about 15 minutes to prevent
battery depletion.
xThe operation of the illuminated
entry system can be changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
xThe illuminated entry system does
not operate in conjunction with the
overhead lights when the overhead
lights are turned on using the
overhead light ON/OFF switch.
Accessory Sockets
▼Accessory Sockets
Only use genuine Mazda accessories
or the equivalent requiring no greater
than 120 W (DC 12 V, 10 A).
The ignition must be switched to ACC
or ON.


CAUTION
¾To prevent accessory socket damage
or electrical failure, pay attention to
the following:
¾Do not use accessories that require
more than 120 W (DC 12 V, 10 A).
¾Do not use accessories that are not
genuine Mazda accessories or the
equivalent.
¾Close the cover when the
accessory socket is not in use to
prevent foreign objects and liquids
from getting into the accessory
socket.
¾Correctly insert the plug into the
accessory socket.
¾Do not insert the cigarette lighter
into the accessory socket.
¾Noise may occur on the audio
playback depending on the device
connected to the accessory socket.
Interior Features
Interior Equipment
5-35

Maintenance item 1st2nd3rd 4th 5th 6th 7th 8th 9th10th 11th 12th
Exhaust system and heat shields IIIIIIIIIIII
Function of all lights I I I I I I I I I I I I
Body condition (for rust, corrosion and per-
foration)IIIIIIIIIIII
Tyre inflation pressure and tyre wear
*5*6IIIIIIIIIIII
Emergency flat tyre repair kit (if installed)
*7IIIIIIIIIIII
Fuel lines & hoses IIIIII
Brake
fluid
*8RRRRRR
Cabin air filter (if installed) R R R R R R
Hoses and tubes for emission I I I
Air
filter
*9RRRR
Manual transmission oil R R
Fuel filterExcept below
countriesReplace every 120,000 km.
Azerbaijan/
ArmeniaReplace every 60,000 km.
Engine coolant
*10Replace at first 195,000 km or 120 months; after that,
every 90,000 km or 60 months.
Rear differential oil
*11
Transfer oil*11
Chart symbols:
I: Inspect: Inspect and clean, repair, adjust,
fill up, or replace if necessary.
T: Tighten
R: Replace
Remarks:
*1 Reset the engine oil data whenever replacing the engine oil regardless of the message/wrench
indicator light display.
*2 Also inspect the air conditioner drive belts, if installed.
If the vehicle is driven primarily under any of the following conditions, inspect the drive belts at every
7,500 km or 6 months.
a) Driving for long period in extremely wet or heavy rain condition.
*3 Inspect the battery electrolyte level, specific gravity and outer appearance. The sealed battery only
requires an outer appearance inspection.
*4 Inspection is only subjected for lead-acid battery.*5 Tyre rotation is recommended every 15,000 km.*6 Inspect a spare tyre if installed.
Maintenance and Care
Scheduled Maintenance
6-10