Page 114 of 600

1142. Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
■Energy monitor 
 P. 126
■G-forces  
Displays lateral G-forces on the vehicle 
Also displays, around the periphery of the G-force display, the left and right 
steering amount, accelerator pedal input, and brake fluid pressure 
Acceleration G-force on the 
vehicle 
Current G-force value (analyzed 
value of front/rear and left/right 
G-forces) 
Accelerator pedal input 
Brake fluid pressure 
Record of the maximum G-forces 
Steering amount
Actual vehicle conditions may differ from the displayed information depending on road conditions, temperature, vehicle speed and other factors.Use this information as reference.
●Resetting the record of maximum G-forces 
Press and hold   to reset the record.
●Peak hold function (F SPORT models)
If lateral G-forces of 0.5 G or grea ter are generated, the G-force value 
display will turn amber and be held for 2 seconds.
■Tire inflation pressure (vehicles with the tire pressure warning system) 
Displays inflation pressure of each tire.
The inflation pressure of the compac t spare tire will not be displayed.
■LKA (Lane-Keeping Assist) vehicle sway warning (if equipped) 
 P. 282
1
2
3
4
5
6 
     
        
        Page 115 of 600

1152. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
■Display off 
A blank screen is displayed
*1: Displayed when the item is set in “Drive Info 1”, “Drive Info 2” or “Drive Info 3”.  
( P. 562)
*2: The function can be reset by pressing the   of the meter control switches for longer 
than 1 second when the item to reset is displayed. 
If there is more than one item that can be  reset, the item selection screen will appear.
The settings of the following items can be changed, refer to P. 561
For functions that can be enabled or disabled, the function switches between on and 
off each time   is pressed.
■ (Lane-Keeping Assist) (if equipped) ( P. 282)
■ (Pre-Crash Safety system) (if equipped) (P. 270)
■ (Adaptive Front-lighting System) (if equipped) (P. 239)
■ (Blind Spot Monitor) (if equipped) (P. 314)
■
Select to turn the speed warning on and off, or to change the speed at which 
the speed warning is displayed.
■ (Road Sign Assi st) (if equipped) (P. 291)
■
Select to set the display mode of the clock.
■ 
●Oil Maintenance ( P. 408)
●TPMS (Tire pressure warning system) (if equipped) (P. 418)
Settings display 
     
        
        Page 117 of 600

1172. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
■G-force display
●The G-force values may not be zero even when the vehicle is parked, such as when it is parked on an incline.
●Depending on the vehicle usage conditions, the brake fluid pressure display may not 
reach its maximum reading even though the brake pedal is fully depressed.
●If a 12-volt battery terminal is disconnected and reconnected, the steering amount dis- play may be disabled temporarily. After driv ing the vehicle for a while, the display will 
be enabled.
●Depending on the condition of the vehicle, the brake fluid pressure display may change even when the brake pedal is not depressed.
■System check display 
After turning the power switch to ON mode , opening image is displayed while system operation is checked. When the system check  is complete, the normal screen will return.
■Suspension of the settings display 
In the following situations, the settings disp lay using the meter control switches will be suspended.
●When a warning message appears on  the multi-information display
●When the vehicle begins to move
■Tire inflation pressure (if equipped)
●It may take a few minutes to display the tire inflation pressure after the power switch is turned to ON mode. It may also take a few minutes to display the tire inflation pressureafter inflation pressure has been adjusted.
●“---” may be displayed if the tire information cannot be determined due to unfavorableradio wave conditions.
●Tire inflation pressure changes with temperature. The displayed values may also be dif- 
ferent from the values measured using a tire pressure gauge.
■When disconnecting and reconnecting 12-volt battery terminals 
The drive information will be reset.
■Liquid crystal display
 P. 109