2019 LEXUS GS300H reset

18Pictorial index
GS450h_300h_OM_OM30F92E_(EE)
■Switches (Left-hand drive vehicles)
VSC OFF switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 326
Heated steering wheel switch* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 362
Automatic High Beam switch*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 246
Adaptive High-beam System switch* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 241
Instrument panel light control switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 107
Odometer/trip meter and trip meter reset butt on . . . . . . . . . . . . . . . . . P. 107
HUD (Head-up display) switches*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 119
Brake hold switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 235
1
2
3
4
5
6
7

26Pictorial index
GS450h_300h_OM_OM30F92E_(EE)
■Switches (Right-hand drive vehicles)
Brake hold switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .P. 235
Odometer/trip meter and trip meter reset butt on . . . . . . . . . . . . . . . . . P. 107
Instrument panel light control switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 107
HUD (Head-up display) switches*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 119
VSC OFF switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 326
Automatic High Beam switch*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 246
Adaptive High-beam System switch* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 241
Heated steering wheel switch* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P. 362
1
2
3
4
5
6
7

1052. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
Engine coolant temperature gauge
Displays the engine coolant temperature
Tachometer/Hybrid System Indicator
Tachometer: Displays the engine speed in revolutions per minute.
Hybrid System Indicator: Displays hybrid system outp ut or regeneration level (P. 108)
Outside temperature
Displays the outside temperature within the range of -40C (-40F) to 50C (122 F). Low outside temperature indicator comes on when the ambient temperature
is 3 C (37F) or lower.
Clock
Time displayed is linked to the analog clock on the instrument panel. (P. 378)
Speedometer
Displays the vehicle speed
Fuel gauge
Displays the quantity of fuel remaining in the tank
Multi-information display
Presents the driver with a variety of driving-related data (P. 111)
Displays warning messages in case of a malfunction (P. 466)
Odometer, trip meter, maintenance required information and speed warning
display
Odometer: Displays the total distance the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances inde-pendently.
Maintenance required information: • Displays the maintenance required information when the power switch is inON mode.
• It can be reset from of the multi-information display. ( P. 111)
Speed warning:
Displays a warning when the speed set in of the multi-information display is exceeded. ( P. 562)
Shift position and shift range
Displays the selected shift position or selected shift range (P. 224)
1
2
3
4
5
6
7
8
9

1072. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
Switches between odometer, trip meter
and maintenance required information
displays. When the trip meter is dis-
played, pressing and holding the button
will reset the trip meter.
The brightness of the instrument panel lights can be adjusted.
Darker
Brighter
Changing the display
Instrument panel light control
1
2

1122. Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
Warning message display
Select to display warning messages and measures to be taken if a malfunction is detected. ( P. 466)
Settings display
Select to change the meter display settings. (P. 562)
The multi-information display is oper-
ated using the meter control switches.
: Switch menu
: Change displayed con-
tent, scroll up/down the
screen and move the cur-
sor up/down
Press: Enter/Set
Press and hold: Reset
Return to the previous screen
Press: Displays the screen registered to
When no screen has been registered, the drive information screen will be displayed.
Press and hold: Registers the currently displayed screen to (P. 562)
When the confirmation screen is displayed, select yes to register the screen. If the
selected screen cannot be re gistered, a registration failure message will be shown.
Operating the meter control switches
1
2
3
4

1132. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
Items displayed can be switched by pressing or of the meter control
switches to select and pressing or .
■Current fuel consumption*1
Displays the current rate of fuel consumption
■Average fuel economy (after reset*2/after start/after refuel)*1
Displays the average fuel consumption since the function was reset, the hybrid
system was started, and the vehicle was refueled, respectively
Use the displayed average fuel consumption as a reference.
■Average speed (after reset*2/after start)*1
Displays the average vehicle speed since the function was reset and the
hybrid system was started, respectively
■Elapsed time (after reset*2/after start)*1
Displays the elapsed time since the function was reset and the hybrid system
was started, respectively
■Distance (range/after start)*1
Displays the estimated maximum distance that can be driven with the quantity
of fuel remaining and the distance driven after the hybrid system was started
respectively.
• This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. • When only a small amount of fuel is added to the tank, the display may not be
updated. When refueling, turn the power switch off. If the vehicle is refueled without turningthe power switch off, the display may not be updated.
Drive information

1142. Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
■Energy monitor
 P. 126
■G-forces
Displays lateral G-forces on the vehicle
Also displays, around the periphery of the G-force display, the left and right
steering amount, accelerator pedal input, and brake fluid pressure
Acceleration G-force on the
vehicle
Current G-force value (analyzed
value of front/rear and left/right
G-forces)
Accelerator pedal input
Brake fluid pressure
Record of the maximum G-forces
Steering amount
Actual vehicle conditions may differ from the displayed information depending on road conditions, temperature, vehicle speed and other factors.Use this information as reference.
●Resetting the record of maximum G-forces
Press and hold to reset the record.
●Peak hold function (F SPORT models)
If lateral G-forces of 0.5 G or grea ter are generated, the G-force value
display will turn amber and be held for 2 seconds.
■Tire inflation pressure (vehicles with the tire pressure warning system)
Displays inflation pressure of each tire.
The inflation pressure of the compac t spare tire will not be displayed.
■LKA (Lane-Keeping Assist) vehicle sway warning (if equipped)
 P. 282
1
2
3
4
5
6

1152. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
■Display off
A blank screen is displayed
*1: Displayed when the item is set in “Drive Info 1”, “Drive Info 2” or “Drive Info 3”.
( P. 562)
*2: The function can be reset by pressing the of the meter control switches for longer
than 1 second when the item to reset is displayed.
If there is more than one item that can be reset, the item selection screen will appear.
The settings of the following items can be changed, refer to P. 561
For functions that can be enabled or disabled, the function switches between on and
off each time is pressed.
■ (Lane-Keeping Assist) (if equipped) ( P. 282)
■ (Pre-Crash Safety system) (if equipped) (P. 270)
■ (Adaptive Front-lighting System) (if equipped) (P. 239)
■ (Blind Spot Monitor) (if equipped) (P. 314)
■
Select to turn the speed warning on and off, or to change the speed at which
the speed warning is displayed.
■ (Road Sign Assi st) (if equipped) (P. 291)
■
Select to set the display mode of the clock.
■
●Oil Maintenance ( P. 408)
●TPMS (Tire pressure warning system) (if equipped) (P. 418)
Settings display