2019 KIA SOUL Features and Functions Guide

7ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED
INSTRUMENT CLUSTER
SET
CRUISE
RES
CANCELMODE
VOL
VOL
DRIVE
MODE
Service Interval:
•Enable Service Interval
•Adjust Interval
•Reset
Convenience:
•Gear Position Pop-Up*
Other Features:
•Fuel Economy Auto Reset
•Fuel Economy Unit
•Temperature Unit
Language:
•Choose Language
A
B
(For Type B cluster; Buttons located on Steering Wheel)
To view these videos on your mobile device, snap these QR Codes or visit the listed website
Refer to page 2 for more information
LCD Display Video
LCD Display: Maintenance Video
www.youtube.com/KiaFeatureVideos
www.youtube.com/KiaFeatureVideos
QR CODEUser Settings Mode
To enter the User Settings mode in the LCD Instrument
Cluster Modes, press the Mode/Select button A when the
vehicle is at a standstill and with the Engine Start /Stop*
button in the ON position and select User Settings
You can navigate the selections on the display by pressing
the Move/Reset button B, and then selecting the item by
pressing the Mode/Select button A
Service Interval Mode
To enter Service Interval Mode, press the Mode/Select
button A and select User Settings , then scroll to
Service Interval by pressing Move/Reset button B Press
the Mode/Select button A to enter System will display
number of miles remaining until next service is due, and
type of service
When service is required, the following will be displayed:
Service Required
To reset the Service Interval Mode system, press and hold
the Move/Reset button B for more than 1 second
To turn Service In OFF, go to User Settings
Service Interval Setting
To set the service interval when in User Settings mode:
•Press the Move/Reset button B and scroll to Service Interval
Press the Mode/Select button A to enter
•Press the Move/Reset button B and toggle to ON, then press
the Move/Select button A
Then press the Move/Reset
button B to scroll and select
the desired miles or months
for your next service
•Press the Mode/Select button A to enter
Driving Assist*:
•Smart Cruise Control*
•Forward Collision-Avoidance Assist (FCA)*
•FCW (Forward Collision Warning)*
•Blind-Spot Collision Warning (BCW )*
•Rear Cross-Traffic Collision Warning (RCCW )*
Door/Liftgate:
•Automatically Lock
•Automatically Unlock
•Two Press Unlock
•Horn Feedback
Lights:
•One-Touch Turn Signal
•Headlamp Delay
Sound:
•Parking Distance Warning- Reverse* System Volume
•Welcome Sound*(Instrument cluster LCD screen shown)
3 6 days1,10 0 mi

SOUL FEATURES & FUNCTIONS GUIDE8*IF EQUIPPED
INSTRUMENT CLUSTER
(Type B cluster)
B(For Type B cluster; Button located on Steering Wheel)
Drive Mode Video To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
www.youtube.com/KiaFeatureVideos
QR CODE
DRIVE
MODE
A
(Button located on Steering Wheel)
A
SETCRUISERESCANCELMODEVOL
VOL
DRIVE
MODEDRIVE
MODE
B
ECO
NORMAL
SPORT
Dual Clutch Transmission*
NORMALSPORT
ECO Mode (Active ECO)*
Active ECO is designed to help improve fuel economy by
controlling several vehicle components When activated, it
optimizes drivetrain operations such as engine power and
transmission to help improve fuel economy
To turn ON, press the DRIVE MODE button A The green
ECO indicator light B in the instrument cluster will
illuminate, indicating that Active ECO is operating
The Active ECO System will remain on even when the
ignition is cycled
To turn Active ECO OFF, press the button A again
To help improve your fuel efficiency: •
Drive at a moderate speed, accelerating smoothly and at a moderate rate •
Keep tires inflated to the recommended pressure •Be sure the wheels are properly aligned
QUICK TIPS
Drive Mode Integrated Control System*
The Drive Mode may be selected based on the driver’s
preferences and road conditions
To cycle through the different Drive Modes A, press the
DRIVE MODE button B The instrument cluster will display
SPORT or ECO when selected When in NORMAL mode, it
will not display in the instrument cluster
REMINDERS:
•
The system is turned ON and in NORMAL mode when ignition is in the ON position
•
When ECO mode is selected, the indicator will display and system remains on, even when ignition is cycled Otherwise the system will default to NORMAL
•Steering effort may be slightly increased in Sport mode
Your vehicle’s steering wheel buttons may differ from those in the illustrations. See your Owner’s Manual for more details

9
DRIVER'S PANEL
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Forward Collision-Avoidance
Assist (FCA)†6 / Forward Collision
Warning (FCW)*†6
The FCA is designed to help alert the driver, and under
certain conditions if necessary, apply emergency
braking, when rapidly approaching a vehicle that is
slowing down, braking or stopped Initially, the FCA
provides Forward Collision Warning (FCW ) when it
detects a potential collision with a vehicle in front
emitting an audible warning and visual alert on the
instrument cluster Adjust the alert settings (Early,
Normal, Late) in the User Settings To turn the FCA /
FCW off, go to User Settings again and turn off
If the system detects that the collision risk increases,
the Forward Collision-Avoidance Assist (FCA)
automatically applies the brakes to reduce your
speed, helping to minimize the effects of a possible
collision FCA can be turned ON in the User Settings
menu on the Instrument Cluster display
The FCA /FCW will become active when the:
•Engine Start /Stop button is ON
•Vehicle is traveling more than 5 mph
•Electronic Stability Control (ESC) is ON
The Forward Collision-Avoidance Assist (FCA) / Forward Collision Warning (FCW)* are not substitutes for safe and proper driving. Always drive safely and use caution. The FCW will be activated by default when the ignition is cycled ON, even when previous setting to OFF.
Lane Departure Warning (LDW)*†6
With the Engine Start /Stop button in the ON position, press
the LDW button A to turn system ON The instrument cluster
indicator will illuminate white It will remain white when
vehicle is traveling less than 40 mph and the system does
not detect the lane markers When system detects the lane
markers, the LDW icon will illuminate green
If the LDW detects that you are moving outside of your lane,
the vehicle crossing lane indicator will blink and the system
issues an audible warning and display an LDW alert on the
instrument cluster under these conditions:
•The vehicle exceeds approximately 40 mph
•The vehicle is between the lane markers
•The LDW system recognizes the lane the vehicle is traveling in
•
LK A /LDW will return to its previous state when the ignition
is cycled
REMINDERS:
• The FCW and FCA will be activated by default when vehicle power is cycled on, even when previous setting is off
• The FCW will not operate when the vehicle is traveling more than approximately 50 mph
• If the FCA is operating and the ESC (Electronic Stability Control) is turned off, the FCA system is automatically turned off
• When FCA system is off, the FCA warning indicator is on in the Instrument Cluster
The Lane Departure Warning (LDW)* is not a substitute for safe and proper driving. Always drive safely and use caution. LDW may not always alert the driver if the vehicle is driven outside of its lane.
When the LDW sensor detects the lanes traveling in, the indicators are illuminated
When the LDW sensor does not detect the lanes traveling in, the indicator will not illuminate
When the LDW sensor detects the vehicle moving outside of the lane the vehicle’s traveling in, a yellow indicator will illuminate, either on the left or right lane
Lane DepartureLane Departure
Lane DepartureLane DepartureLane DepartureLane Departure
Lane DepartureLane Departure
Lane DepartureLane Departure
Lane DepartureLane Departure
A
Lane Departure Warning Video
Forward Collision-Avoidance Assist Video
www.youtube.com/KiaFeatureVideos
QR CODE
REMINDERS:
• LDW will not issue a warning if the turn signal or hazard lights are activated
• If LDW button is ON/OFF and ignition is cycled, the system returns to its previous state
Lane DepartureLane Departure
Lane DepartureLane Departure

SOUL FEATURES & FUNCTIONS GUIDE10*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
DRIVER'S PANEL
Blind-Spot Collision Warning (BCW) w/RCCW*†6
Blind-Spot Collision Warning w/ RCCW Video
To view a video on your mobile device, snap this QR Code or visit the listed website
Refer to page 2 for more information
www.youtube.com/KiaFeatureVideos
QR CODE
For more information on the BCW System, refer to your Owner’s Manual.
The above images are for illustration purposes only and may not reflect actual operation.
The BCW System uses radar sensors to help alert the driver if it detects an
approaching vehicle in the driver’s blind spot area before changing lanes in
certain situations The BCW System is ON when the button A is pressed – the
button light will illuminate The outside rearview mirror warning lights will also
illuminate for 3 seconds
The system will become active when the vehicle is traveling more than 20 mph
and will alert the driver if another vehicle is detected by the radar sensor
1st-stage alert: When another vehicle is detected within the BCW System
boundary B, or when a vehicle is detected within the LCA boundary, a yellow
indicator will illuminate on the outside rearview mirrors
2nd-stage alert: When 1st-stage alert is on and the driver activates a turn
signal, a flashing yellow indicator will illuminate on the outside rearview mirrors
and the system will sound an alert
Rear Cross-Traffic Collision Warning (RCCW)*
If the RCCW system sensors detect approaching vehicles from the left
or right side C, the system will sound an audible alert, the warning
indicators on the outside rearview mirror will illuminate and a message
will appear on the LCD screen RCCW is designed to operate under these
following conditions:
•When the gear shift is in Reverse
•When the vehicle is moving less than 6 mph
REMINDERS:
•
When the BCW is ON and the vehicle power is cycled to OFF then ON again, the BCW system returns to ON
•
The RCCW feature can be turned OFF/ON in User Settings
•
The BCW will not operate when the vehicle is traveling more than approximately 50 mph
•
The RCCW system will show a warning if the approaching vehicle speed is between 2 5-22 mph within sensing range See owner’s manual for other conditions
•
The BCW and RCCW systems are supplemental systems Do not solely rely on these systems and always pay attention to drive safely
A
B
C

11
DRIVER'S PANEL
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
HAC does not replace the need to apply brakes while the vehicle is stopped on an incline.
(Buttons located on left side of Driver’s Panel)
For more information on Electronic Stability Control (ESC) and its specific features and operations, please refer to your Owner’s Manual.
A
B
(Buttons located on left side of Driver’s Panel)
Electronic Stability Control (ESC)†7
The ESC system is designed to help stabilize the vehicle during
certain cornering maneuvers It is a good idea to keep the ESC
turned ON for daily driving whenever possible
Press ESC button A to turn ESC OFF/ON
REMINDERS:
•
ESC is turned ON by default at vehicle start-up When ignition is cycled, ESC will turn ON again
•
The ESC Indicator Light in the instrument cluster will be lit momentarily whenever the ESC is active
Hill-Start Assist Control (HAC)*†7
HAC helps prevent the vehicle from rolling backward when accelerating from a
stop while on a steep incline The HAC automatically activates whether the ESC
is OFF or ON, but does NOT activate when the ESC has malfunctioned
REMINDER: The HAC does not operate when the gear shift is in the P (Park) or the N (Neutral) position
•
•HAC provides a 2-second delay before the vehicle may start rolling backwards •When HAC is active (e g , accelerating from a stop on an incline), you may notice that the brakes will momentarily remain engaged after you depress the accelerator
QUICK TIPS
Instrument Panel Dimmer
With parking lights / headlights ON, press switch B + or – to adjust
display brightness of the instrument panel illumination
REMINDER: Door Mood Lamp is a fixed brightness and cannot be adjusted (not to be confused with Advanced Mood Lighting Speaker)

SOUL FEATURES & FUNCTIONS GUIDE*IF EQUIPPED 12
DRIVER'S PANEL
A
B
C
DE
Button configuration may vary depending on vehicle model.
Power Windows, Window Lock
& Central Door Lock
A Pull/Press to operate Driver’s and Front Passenger’s window
Auto Up/Down*
B Press to Unlock /Lock All Doors
C Press to disable Rear Passenger Windows
•
Press button again to stop Auto Up/Down function
QUICK TIP
REMINDER: When button C is pressed, window controls for the Rear Passenger Windows are disabled
Automatic Door Lock/Unlock
Auto Door Lock /Unlock will engage when the gear shift
is moved in to or out of the P (Park) position Refer to the
User Settings in the LCD Instrument Cluster modes on
how to turn Auto Door Lock /Unlock ON/OFF
Power Folding Outside Mirrors*
Toggle switch D left or right to select mirror Then press arrows to
adjust mirror position
Toggle button E left /right to unfold/fold the outside rearview mirrors
Toggle button E to center to automatically fold/unfold mirrors when:
•The Smart Key Lock /Unlock buttons are pressed
•The door outside handle button is pressed
REMINDERS:
•
To automatically fold mirrors when exiting vehicle, press the LOCK button on the Smart Key
•
To lock position of mirrors, toggle the L /R mirror switch to the neutral (center) position
•
•The mirrors will automatically unfold when the Smart Key* is within close proximity to the vehicle and the switch is in the AUTO position
QUICK TIP
Heated Outside Mirrors*
Use mirrors heaters to defrost / defog mirrors Mirror heaters
controlled with Rear Defroster

13
STEERING WHEEL CONTROLS
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
For illustrative purposes only; your steering wheel may differ.
REMINDER: If the steering wheel becomes too warm, turn the system off The heated steering wheel may cause burns even at low temperatures, especially if used for long periods of time

B
C
A
(Buttons located on left side of Driver’s Panel)
D
Tilt/Telescoping Steering Wheel†2 3
To adjust the Steering Wheel, push down the lock-release
lever A and adjust to desired angle B and distance C
When finished, pull up the lock-release lever A to lock
Steering Wheel in place
It may be helpful to pull/push bottom of the steering wheel towards/away from you to adjust desired distance prior to adjusting the angle
QUICK TIPS
Heated Steering Wheel*
Press button D to turn ON/OFF steering wheel heater, while the Engine
Start /Stop Button is in the ON position The steering wheel heater will
turn off automatically in 30 minutes, or when button is pressed again
to deactivate

If ignition is turned OFF, then ON again, within 30 minutes of the steering wheel heater being turned on, the system will automatically be set ON again
QUICK TIP

SOUL FEATURES & FUNCTIONS GUIDE14*IF EQUIPPED
STEERING WHEEL CONTROLS
AUTO*Automatic Headlights position
Headlight position
Parking Light position
OFFOFF position
O ne -Touch Lane Change Signal
Headlights & High Beams
To operate:
•Rotate switch to change the Headlight function
•Push lever to turn High Beams ON
•Pull lever to flash Headlights / High Beams
AUTO Light* position — When the light switch is in the AUTO light
position, the tail lights and headlights will turn ON/OFF automatically,
depending on the amount of light outside the vehicle
Turn Signals & Fog Lights*
To operate:
•Turn Signals - Move lever Up/Down for Right /Left Turn Signal
•Fog Lights - Rotate lever ring to turn Fog Lights ON/OFF
One-Touch Lane Change Signal is activated by moving the Turn Signal
Lever up/down slightly for less than 1 second and then releasing The lane
change signal will blink 3 times
To change how many times the Lane Change Signal blinks (3/5/7), go to
User Settings Mode* in the LCD Instrument Cluster modes ( Type B cluster)
REMINDER: Headlights must be ON for Fog Light operation
For more information on the User Settings Mode, please refer to your Owner’s Manual.