16
HomeLink® Universal Transceiver
(if so equipped)
HomeLink
To program the HomeLink® Universal Transceiver:
1 .
P
osition the handheld transceiver 1-3 in (26-76 mm)
away from the HomeLink surface, keeping the HomeLink
indicator light in view.
2 .
Pr
ess and hold the desired HomeLink button and the handheld
transmitter button simultaneously until the HomeLink indicator
light flashes slowly and then rapidly.
3
.
Bo
th buttons may now be released.
4
Pr
ess and hold the HomeLink button, and a blinking light that
turns to a solid, continuous light after 2 seconds will display.
5 .
A
t the receiver of the device press and release the program
button (this button can typically be found near the hanging
antenna wire of the device you are programing into HomeLink).
6.
Pr
ess and hold the programed HomeLink button for 2
seconds and release.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
REMOTE ENGINE START
(if so equipped)
The r
emote engine start system must be
enabled in the vehicle settings within the
lower display. To start your vehicle remotely:
1.
Pr
ess the lock button
to
lock the vehicle.
2.
Pr
ess and hold the remote start button
within 5 seconds of pressing the lock
button
and the engine will start.
T
o start driving, depress the brake
pedal and press the ignition switch
START/STOP button.
State laws may apply, review local
laws before using.
ROLL DOWN FEATURE
The windows can be opened remotely using your Infiniti Intelligent Key.
•
With the
vehicle unlocked, press and hold the unlock button
to
open the windows and moonroof (if so equipped) remotely.
•
I
f the unlock button
is released, the windows will stop.
To resume the roll down feature, press and hold the unlock
button
again.Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Infiniti Intelligent Key System
