2019 HONDA CLARITY PLUG IN HYBRID engine

18
Quick Reference Guide Energy Efficiency As with a gasoline powered vehicle, the fuel efficiency and the range of this vehicle is most impacted by the driver’s driving style. Aggressive
acceleration and high-speed driving can easily trigger the system to switch the propulsion source to the gasoline-powered engin e. Climate
control system usage also has a str ong impact with heavy usage negatively affecting the vehicle’s range.
Battery Type There are two types of batteries used in this vehicle, a standa rd 12-volt battery that powers th e airbags, the interior and exterior lights, and
other standard 12-volt systems, and a high voltage battery that is used to power the propulsion motor and recharge the 12-volt battery.
Hybrid Vehicles High voltage parts and high voltag e wires in this vehicle are sheathed in electro magnetic shielding material; therefore, the am ount of
electromagnetic waves emitted is no more gr eater than those emitted by household appliances or the electrical parts in conventi onal
vehicles.
Sounds Unique to the Honda Plug-In System When you first start driving this vehicle, you likely will hear some unfamiliar sounds, particula rly when you first turn on the power system,
while driving, and just after parking. Some of these sounds are unique to this vehicle‘s powertrain, fuel, and climate control systems; others
are similar to sounds generated by conventi onal automobiles that typically are masked by louder noises absent from a vehicle of this design.
These sounds are not a cause for concern, and you will soon recognize them as normal and thus be able to detect any new or unus ual noise
should one develop.
After shutting off the engi ne, you may hear certain noises coming from the vehicle. Here’s the lowdown:
● Noise from Under Vehicle: This noise is caused by the vacuum pump inside the fuel evaporation leakage check module (ELCM).
Depending on conditions, the pump will come on for about 15 minutes about 5 to 10 hours after engine shutoff. This noise is just normal
vehicle operation and don’t indicate a vehicle problem.19 CLARITY PHEV-31TRW6100.book 18 ページ ２０１８年１０月２５日　木曜日　午後２時２９分

22
Quick Reference Guide Safe Driving (P 41)
Airbags (P 54)
● Your vehicle is fitted with ai rbags to help protect you and
your passengers during a moderate-to-severe collision.
Child Safety (P 69)
● All children 12 and younger should be seated in the rear seat.
● Smaller children should be properly restra ined in a forward-facing child seat.
● Infants must be properly restraine d in a rear-facing child seat.
Before Driving Checklist (P 46)
● Before driving, check that the front seats, head restraints,
steering wheel, and mirrors have been properly adjusted.
Seat Belts (P 47)
● Fasten your seat belt and sit upright well
back in the seat.
● Check that your passengers are wearing
their seat belts correctly.
Fasten your lap belt as
low as possible.Exhaust Gas Hazard (P 82)
● Your vehicle emits dangerous exhaust gases that contain
carbon monoxide. Do not run the engine in confined
spaces where carbon monoxide gas can accumulate.19 CLARITY PHEV-31TRW6100.book 22 ページ ２０１８年１０月２５日　木曜日　午後２時２９分

32
Quick Reference Guide Deceleration Paddle Selector (P 392)
When you release the accelerator pedal, yo u can control the rate of deceleration
without releasing your hands from the steering wheel. Using the deceleration
paddle selector situated on the steering wheel, you can sequentially shift through
four stages of deceleration.
Pull the ( +
selector for a few seconds when yo u want to cancel the deceleration
paddle selector.
● When SPORT mode is OFF
If you pull back the paddle selector, the rate of deceleration will change
temporarily, and the stage will ap pear in the instrument panel.
● When SPORT mode is ON
If you pull back the paddle selector, the rate of deceleration will change and
the stage along with M will appear in the instrument panel.
When SPORT mode is
OFF, the deceleration
stage appears. When SPORT mode is
ON, The deceleration
stage and M appear.
( -
Paddle
Selector ( +
Paddle
Selector Deceleration stage VSA ® On and Off (P 426)
● The Vehicle Stability Assist ® (VSA ® ) system
helps stabilize the vehicle during
cornering and helps maintain traction
while accelerating on loose or slippery
road surfaces.
● VSA ® comes on automatically every time
you turn on the power system.
● To partially disable or fully restore VSA ®
function, press and hold the button until
you hear a beep.
CMBS TM
On and Off (P 445)
● When a possible collision is likely
unavoidable, the CMBS TM
can help you to
reduce the vehicle sp eed and the severity
of the collision.
● The CMBS TM
is turned on every time you
start the engine.
● To turn the CMBS TM
on or off, press and
hold the button until you hear a beep.
Tire Pressure Monitoring
System (TPMS) (P 428)
● Detects a change in tire conditions and
overall dimensions due to decrease in tire
pressures.
● The TPMS is turned on automatically
every time you turn on the power system.
● A calibration procedure must be
performed when certain conditions arise.19 CLARITY PHEV-31TRW6100.book 32 ページ ２０１８年１０月２５日　木曜日　午後２時２９分

35
Quick Reference Guide
Maintenance (P 473)
Under the Hood (P 482)
● Check engine oil, coolants and windshield washer fluid. Add
when necessary.
● Check brake fluid.
● Check the 12-volt battery condition monthly.
a Pull the hood release handle under the corner of the
dashboard.
b Locate the hood latch lever, push it to the side, and then
raise the hood. Once you have raised the hood slightly, you
can release the lever.
c When finished, close the hood and make sure it is firmly
locked in place. Lights (P 496)
● Inspect all lights regularly.Wiper Blades (P 498)
● Replace blades if they leave streaks
across the windshield.
Tires (P 501)
● Inspect tires and wheels regularly.
● Check tire pressures regularly.
● Install snow tires for winter driving.19 CLARITY PHEV-31TRW6100.book 35 ページ ２０１８年１０月２５日　木曜日　午後２時２９分

38
Quick Reference Guide Why doesn’t the curved
blue line in the meter
appear even when the EV
indicator is on? The vehicle is performing a system check. 2 Auto Engine Stop/Start (P13)
Why does the beeper
sound when I start driving? The beeper sounds when the driver and/or front passenger are
not wearing their seat belts.
Why does a beeper sound
when I walk away from the
vehicle after I close the
door? The beeper sounds if you move outside the walk away auto lock
operating range before the door completely closes. 2 Locking the doors and trunk (Walk away auto lock ® ) (P 140)
Pressing the electric
parking brake switch does
not release the parking
brake. Why? Press the electric parking brake switch with the brake pedal
depressed.
Depressing the accelerator
pedal does not release the
parking brake
automatically. Why? ●
Fasten the driver’s seat belt. ●
Check if the transmission is in ( P
or ( N
. If so, select any other
position.19 CLARITY PHEV-31TRW6100.book 38 ページ ２０１８年１０月２５日　木曜日　午後２時２９分

82
Safe Driving Exhaust Gas Hazard Carbon Monoxide Gas The engine exhaust from this vehicle contains carbon monoxide, a colorless,
odorless, and highly toxic gas. As long as you properly maintain your vehicle, carbon
monoxide gas will not get into the interior.
■ Have the exhaust system in spected for leaks whenever
• The exhaust system is m aking an unusual noise.
• The exhaust system may have been damaged.
• The vehicle is raised for an oil change.
When you operate a vehicle with the trunk open, airflow can pull exhaust gas into
the interior and create a hazardous condition. If you must drive with the trunk open,
open all the windows and set the climate control system as shown below.
1. Select the fresh air mode.
2. Select the mode.
3. Set the fan speed to high.
4. Set the temperature control to a comfortable setting.
Adjust the climate control system in the same manner if you sit in your parked
vehicle with the engine running. 1 Carbon Monoxide Gas
An enclosed area such as a garage can quickly fill up
with carbon monoxide gas.
Do not run the engine with the garage door closed.
Even when the garage door is open, drive out of the
garage immediately afte r starting the engine.
3
WARNING Carbon monoxide gas is toxic.
Breathing it can cause unconsciousness and
even kill you.
Avoid any enclosed areas or activities that
expose you to carbon monoxide.19 CLARITY PHEV-31TRW6100.book 82 ページ ２０１８年１０月２５日　木曜日　午後２時２９分

89 uu Indicators u
Continued
Instrument Panel
Indicator Name On/Blinking Explanation Message
EV Indicator ●
Comes on for a few seconds when
you set the power mode to ON,
then goes off. ●
Comes on when the vehicle is
moved by the motor, and the
engine is not operating. — —
HV Indicator ●
Comes on for a few seconds when
you set the power mode to ON,
then goes off. — —●
Comes on when the vehicle is in
HV. 2 SPORT HYBRID i-MMD Plug-in
(Intelligent Multi-mode Drive Plug-
in) P. 11●
Comes on when the vehicle is in
HV charge. 2 SPORT HYBRID i-MMD Plug-in
(Intelligent Multi-mode Drive Plug-
in) P. 11
HV Charge
Indicator ●
Comes on for a few seconds when
you set the power mode to ON,
then goes off. — —●
Comes along with the HV
indicator when the vehicle is in HV
charge. 2 SPORT HYBRID i-MMD Plug-in
(Intelligent Multi-mode Drive Plug-
in) P. 1119 CLARITY PHEV-31TRW6100.book 89 ページ ２０１８年１０月２５日　木曜日　午後２時２９分

90 uu Indicators u
Instrument Panel Indicator Name On/Blinking Explanation Message
READY Indicator ●
Comes on when the vehicle is
ready to drive. ●
May go off if the POWER SYSTEM or
transmission system indicator comes on. 2 Turning on the Power P. 378
Malfunction
Indicator Lamp ●
Comes on when you set the power
mode to ON, and goes off either
when the power system is on or
after several seconds if the vehicle
did not start. If “readiness codes”
have not been set, it blinks five
times before it goes off. ●
Comes on if there is a problem
with the emissions control system. ●
Blinks when a misfire in the
engine's cylinders is detected. ●
Readiness codes are part of the on board
diagnostics for the emissions control
systems. 2 Testing of Readiness Codes P. 573 ●
Comes on while driving - Have your
vehicle checked by an authorized Honda
Clarity Plug-In Hybrid dealer. ●
Blinks while driving - Stop in a safe
place where there are no flammable
objects. Stop the power system for 10
minutes or more, and wait for the engine
to cool down. Then, t ake the vehicle to an
authorized Honda Clarity Plug-In Hybrid
dealer. 2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 549
12-Volt Battery
Charging System
Indicator ●
Comes on when you set the power
mode to ON, and goes off when
the power system is on. ●
Comes on when the 12-volt
battery is not charging. ●
Comes on while driving - Turn off the
climate control system and rear defogger
in order to reduce electricity
consumption. 2 If the 12-Volt Battery Charging
System Indicator Comes On P. 54819 CLARITY PHEV-31TRW6100.book 90 ページ ２０１８年１０月２５日　木曜日　午後２時２９分