Page 60 of 675

uuAirbags uAirbag System Indicators
58
Safe Driving■When the passenger  front airbag off 
indicator comes on
The indicator comes on  to alert you that the 
passenger’s front airbag  has been turned off.
This occurs when the weight sensors detect 
about 65 lbs (29 kg) or less, the weight of an 
infant or small child, on the seat.
Children age 12 or under should always ri de properly restrained in a back seat.
2Child Safety  P. 60
If the front passenger’s seat is empty, th e passenger’s front airbag will not deploy 
and the indicator will come on.
■Passenger Front Airbag Off Indicator1 Passenger Front Airbag Off Indicator
To ensure the passenger is  detected properly, confirm 
that:
•There is no child seat or  other object pressing 
against the rear of the seat-back.
•There is no rear passenger pushing or pulling on 
the back of the front passenger’s seat.
•The front seat or seat-b ack is not forced back 
against an object on the s eat or floor behind it.
•There is no object placed under or beside the front 
passenger’s seat.
•The occupant is sitting in  an upright position and 
the seat back is not  excessively reclined.
•The occupant is not leaning against the door or 
center console.
•The occupant’s feet are plac ed on the floor in front 
of them.
•There are no objects ha nging from the front 
passenger’s seat.
•Only small, lightweight objects are in the seat-back 
pocket.
The passenger front airbag  off indicator may come 
on and go off periodically if  the total weight on the 
seat is near the airbag cutoff threshold.
Have your vehicle checked  by a dealer as soon as 
possible if:
•All of the above conditions are met, and the 
indicator comes on with an adult seated in the 
front passenger seat.
•The seat is empty and the indicator is off.
Do not allow an adult passe nger to ride in the front 
seat when the indicator is on.
U.S.
Canada
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  58 ページ  2018年9月4日 火曜 日 午後1時38分 
         
        
        
     
        
        Page 61 of 675

59
uuAirbags uAirbag Care
Safe Driving
Airbag Care
You do not need to, and should not, perform any maintenance on or replace any 
airbag system components yourself. However, you should have your vehicle 
inspected by a dealer in the following situations:
■When the airbags have deployed
If an airbag has inflated, th e control unit and other related parts must be replaced. 
Similarly, once an automatic seat belt te nsioner has been activated, it must be 
replaced.
■When the vehicle has been in a moderate-to-severe collision
Even if the airbags did not infl ate, have your dealer inspect the following: the driver’s 
seat position sensor, weight sensors in the passenger’s seat, front seat belt 
tensioners, and each seat belt that was worn during the crash.
■Do not remove or modify a fron t seat without consulting a dealer
This would likely disable or affect the proper  operation of the driver’s seat position 
sensor or the weight sensors in the passenge r’s seat. If it is necessary to remove or 
modify a front seat to accommodate a pe rson with disabilities, contact a Honda 
dealer, or for U.S. vehicles, American Ho nda Automobile Customer Service at 1-800-
999-1009 and for Canadian vehicles, Hond a Canada Customer Relations at 1-888-
9-HONDA-9.
1 Airbag Care
We recommend against the use of salvaged airbag 
system components, including the airbag, tensioners, 
sensors, and control unit.
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  59 ページ  2018年9月4日 火曜 日 午後1時38分 
         
        
        
     
        
        Page 64 of 675

62
uuChild Safety uSafety of Infants and Small Children
Safe Driving
Safety of Infants  and Small Children
An infant must be properly restrained in  a rear-facing, reclining child seat until the 
infant reaches the seat manufacturer’s weig ht or height limit for the seat, and the 
infant is at least one year old.
■Positioning a rear-facing child seat
Child seats must be placed and secured in a 
rear seating position.
When properly installed, a rear-facing child  seat may prevent the driver or a front 
passenger from moving their seat all the  way back, or from locking their seat-back 
in the desired position. Make sure that th ere is no contact between the child seat 
and the seat in front of it.
It can also interfere with pr oper operation of the passenger’s advanced front airbag 
system.
2 Airbags  P. 46
If this occurs, we recommend that you install the child seat directly behind the front 
passenger’s seat, move the seat as far fo rward as needed, and leave it unoccupied. 
Or, you may wish to get a sm aller rear-facing child seat.
■Protecting Infants1Protecting Infants
Many experts recommend us e of a rear-facing seat 
for a child up to two years old if the child’s height and 
weight are appropriate  for a rear-facing seat.
Rear-facing child seats should  never be installed in a 
forward facing position.
Always refer to the child seat manufacturer’s 
instructions before installation.
Do not allow a front seat to rest against a child seat 
installed in a rear seating position:
The weight sensor in the fr ont seat may not correctly 
detect the actual weight of the occupant.
3WARNING
Placing a rear-facing child seat in the front 
seat can result in serious injury or death 
during a crash.
Always place a rear-fac ing child seat in the 
rear seat, not the front.
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  62 ページ  2018年9月4日 火曜 日 午後1時38分 
         
        
        
     
        
        Page 80 of 675

78
uuIndicators u
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage
Parking Brake 
and Brake 
System Indicator 
(Amber)
●Comes on if there is a problem 
with the radar sensor.
●Indicator may comes on 
temporarily when the Maximum 
Load Limit is exceeded.
●Make sure the total load is within the 
Maximum Load Limit.
2Maximum Load Limit  P. 429●Stays on constantly - Have your vehicle 
checked by a dealer.—
Automatic Brake 
Hold System 
Indicator
●Comes on for a few seconds when 
you turn the igniti on switch to ON 
(w*1, then goes off.●Comes on when the automatic 
brake hold system is on.
2Automatic Brake Hold  P. 530
Automatic Brake 
Hold Indicator
●Comes on for a few seconds when 
you turn the ignition switch to ON 
(w*1, then goes off.●Comes on when the automatic 
brake hold is activated.2Automatic Brake Hold  P. 530—
U.S.
Canada
(Amber)
Models with Honda Sensing ®
U.S.
Canada
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  78 ページ  2018年9月4日 火曜 日 午後1時38分 
         
        
        
     
        
        Page 83 of 675
81
uuIndicators u
Continued
Instrument Panel
*1:Models with the smart entry system have an  ENGINE START/STOP button instead of an ignition switch.
IndicatorNameOn/BlinkingExplanationMessage
Seat Belt 
Reminder 
Indicator
●Comes on and the beeper sounds 
if you are not wearing a seat belt 
when you turn the ignition switch 
to ON 
(w*1.●If the front passenger is not 
wearing a seat belt, the indicator 
comes on a few seconds later.
●Blinks while driving if either you or 
the front passenger has not 
fastened a seat belt. The beeper 
sounds and the indicator blinks at 
regular intervals.
●The beeper stops and the indicator goes 
off when you and the front passenger 
fasten their seat belts.
●Stays on after you or the front 
passenger has fastened the seat belt 
- A detection error may have occurred in 
the sensor. Have your vehicle checked by 
a dealer.
2 Seat Belt Reminder  P. 40
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  81 ページ  2018年9月4日 火曜 日 午後1時38分 
         
        
        
     
        
        Page 92 of 675

90
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Road Departure 
Mitigation (RDM) 
Indicator
*
●Comes on when the RDM system 
shuts itself off.●Stays on - The temperature inside the 
camera is too high.
Use the climate control system to cool 
down the camera.
The system acti vates when the 
temperature inside the camera cools 
down.
2 Front Sensor Camera  P. 524
●Stays on - The area around the camera is 
blocked by dirt, mud, etc. Stop your 
vehicle in a safe place, and wipe it off with 
a soft cloth.
●Have your vehicle checked by a dealer if 
the indicator and message come back on 
after you cleaned the area around the 
camera.
2 Front Sensor Camera  P. 524
●Comes on if there is a problem 
with the RDM system.
●Indicator may comes on 
temporarily when the Maximum 
Load Limit is exceeded.
●Make sure the total load is within the 
Maximum Load Limit.
2Maximum Load Limit  P. 429●Stays on constantly - Have your vehicle 
checked by a dealer.
—
* Not available on all models
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  90 ページ  2018年9月4日 火曜 日 午後1時38分 
         
        
        
     
        
        Page 96 of 675

94
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Collision 
Mitigation 
Braking 
System
TM 
(CMBSTM) 
Indicator*
●Comes on when the CMBSTM 
shuts itself off.●Stays on  - The area around the camera is 
blocked by dirt, mud, etc. Stop your 
vehicle in a safe place, and wipe it off with 
a soft cloth.
2 Front Sensor Camera  P. 524
●When the radar sensor gets dirty, stop 
your vehicle in a safe place, and wipe off 
dirt using a soft cloth.
●Have your vehicle checked by a dealer if 
the indicator does not go off even after 
you clean the sensor cover.
2Collision Mitigation Braking 
SystemTM (CMBSTM) P. 471
●Stays on  - The temperature inside the 
camera is too high. Use the climate control 
system to cool down the camera. The 
system activates when the temperature 
inside the camera cools down.
2 Front Sensor Camera  P. 524
●Comes on if there is a problem 
with the CMBSTM.●Indicator may comes on 
temporarily when the Maximum 
Load Limit is exceeded.
●Make sure the total load is within the 
Maximum Load Limit.
2Maximum Load Limit  P. 429●Stays on constantly - Have your vehicle 
checked by a dealer.
—
* Not available on all models
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  94 ページ  2018年9月4日 火曜 日 午後1時38分 
         
        
        
     
        
        Page 97 of 675

95
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
Driver Information Interface Warning and Information Messages
The following messages appear only on the  driver information interface. Press the   (d isplay/information) button to see the message 
again with the system message indicator on.
MessageConditionExplanation
●Appears if either door or th e trunk is not completely 
closed.
●Appears if either door or  the trunk is opened while 
driving. The beeper sounds.
●Goes off when both doors  and the trunk are closed.
●Appears when the washer fluid gets low.●Refill the washer fluid.
2Refilling Window Washer Fluid  P. 569
●Appears when the scheduled maintenance is due 
soon.
●Consequently, Maintenance Due Now  and 
Maintenance Past Due  follow.
2Maintenance Minder Messages on the Driver 
Information Interface  P. 551
●Appears when there is a problem with the sensor on 
the battery.●Have your vehicle checked by a dealer.
2Checking the Battery  P. 592
●Appears along with the ba ttery charging system 
indicator when the battery is not charging.●Turn off the climate control sy stem and rear defogger to 
reduce electricity consumption.
2 If the Charging System Indicator Comes On  P. 635
●Appears when the engine coolant temperature gets 
abnormally high.
2Overheating  P. 633
Canadian models
19 CIVIC 2D HCM (KA KL KC)-31TBG6300.book  95 ページ  2018年9月4日 火曜 日 午後1時38分