Speed Limits
Regardless of the speed capability of your tires, never exceed lawful
speeds or speeds dictated by driving conditions.
Hazards
Objects in the road that could damage your tires should be safely
avoided. These objects include: potholes, glass, metal, rocks, wood debris
and the like. Unavoidable contact should prompt a thorough tire inspec-
tion.
Air Pressure
Air pressure maintenance is critical to tire service life. Tire pressures must
be checked frequently when tires are cold (before operation, cool to the
touch) and no less than once per month and before extended operation.
Use a tire gauge to check pressure and maintain it per the vehicle
manufacturer ’s recommendations (on vehicle placard or in owner ’s
manual). Do not reduce pressure when tire is hot and do not inflate a cold
tire higher than limits molded on the tire’s sidewall. Do not overlook
spare tire inflation pressure.
Tire Tread
Tires must be replaced when the depth of the tread reaches 2/32 inch
(1.6 mm). YOKOHAMA tires are manufactured with tread wear indica-
tors molded into the tire grooves which indicate tread wearout. As tires
wear down to 2/32 inch (1.6 mm), and tread depth is reduced, tire
traction is reduced during rainfall and winter road conditions. Visual tire
inspection therefore becomes more crucial as the tires wear out.
Hard Braking
You must inspect your tires after any hard braking situations or after tires
have slid on the pavement. This can cause a flat spot or other damage to
the tread of the tire.
Spinning
•Do not allow tires to spin at speeds greater than 35 mph if vehicle
becomes stuck.
• Do not stand behind a spinning tire while attempting to push a vehicle.
Speed and force can cause a tire to disintegrate and explode and may
cause property damage and/or personal injury.
YOKOHAMA TIRES — LIMITED WARRANTY
266
