2019 CITROEN BERLINGO VAN height adjustment

2
.
.
Instrument panel 11
Warning and indicator lamps 1 3
Indicators
28
Lighting dimmer

3
3
Trip computer

3
4
Setting the time and date

3
5
Key


37
Unlocking
3

8
Locking
40
Back-up control(s)

4
2
Central locking/unlocking
4

6
Anti-intrusion security
4

6
Side-hinged doors
4

7
General recommendations for the
sliding side doors

4
7
Alarm


49
Electric windows

5
1
Tilting rear door windows
5

2Steering wheel adjustment
5

3
Mirrors
5
3
General recommendations for the seats
5
5
Front seats
5
6
Rear bench seat (row 2)
5
8
Rear seats (row 2)
5
9
Rear seats (row 3)
6
1
Adjusting the height of the head restraint
62
I
nterior fittings
6
3
2-position luggage cover parcel shelf
(removable) 6 9
Luggage cover roller 6 9
Warning triangle
7

0
Heating
7

0
Manual air conditioning
7

1
Dual-zone automatic air conditioning
7

1
Recirculation of interior air

7
3
Front demist – defrost

7
4
Heated windscreen
7

4
Rear screen demist – defrost

7
5
Rear heating – air conditioning
7

5
Additional heating/ventilation
7

6
Advice


79
Courtesy lamps

8
0Lighting control stalk

8
1
Automatic headlamp dipping
8
4
Cornering lighting
8
6
Headlamp beam height adjustment
87
W
iper control stalk
87
C
hanging a wiper blade
8
9
Automatic wiping
8
9
General safety recommendations
9
1
Emergency or assistance call
9

2
Hazard warning lamps
9

3
Horn
93
E

lectronic stability control (ESC)
9
4
Advanced Grip Control
9

7
Hill Assist Descent Control

9
8
Seat belts
1

00
Airbags
1

03
Child seats

1
06
Deactivating the front passenger airbag
1

07
"ISOFIX" mountings
1

14
Recommended ISOFIX child seats
1

15
Advice


118
i-Size child seats

1
17
Manual child lock

1
19
Electric child lock

1
19
Over view
Instruments
Access Ease of use and comfort
Safety
Lighting and visibility
Eco-driving
Eco-driving 8
Labels

4
Instruments and controls
5
Contents

6
Steering mounted controls
1
External lighting/direction indicators control stalk
Voice recognition activation button
2
Wiper/screenwash/trip computer control stalk
3
Controls to select the multimedia source ( SRC),
to manage music ( LIST)
and to manage phone
calls (" telephone " print)
4
Controls for speed limiter/
cruise control/adaptive cruise control
5
Instrument panel display mode selection wheel
6
Voice control
Volume adjustment
7
Audio system setting controls
Side switch panel
Manual headlamp beam height
adjustment
Head-up display
DSC/ASR systems Stop & Start
Parking sensors
Additional heating/ventilation
Active Lane Departure Warning
System
Under-inflation detection
Electric child lock
Over view

53
Steering wheel adjustment
F When stationary, lower the control lever
to release the steering wheel adjustment
mechanism.
F

A
djust the height and reach to suit your
driving position.
F

P
ull the control lever to lock the steering
wheel adjustment mechanism.
As a safety precaution, these operations
should only be carried out while the
vehicle is stationary.
Mirrors
Door mirrors
Adjustment
As a safety measure, the mirrors should
be adjusted to reduce the blind spots.
The objects obser ved are, in reality, closer
than they appear.
Take this into account when assessing
the distance of vehicles approaching from
behind.
Manual folding
You can manually fold the mirrors (parking
obstruction, narrow garage, etc.)
F

T
urn the mirror towards the vehicle.
Electric folding
If your vehicle is fitted with this function, the
mirrors can be folded electrically from the inside,
with the vehicle parked and the ignition on:
F Move control A or turn control C (depending on the version you have) to the right or to
the left to select the corresponding mirror.
F

M
ove control B or C (depending on
the version you have) in any of the four
directions to adjust.
F

R
eturn control A or C (depending on the
version you have) to its central position. F

P
lace control A in the central
position.
F

P
ull control A back.
From the outside, lock the vehicle using the
remote control or the key.
3
Ease of use and comfort

56
Front seats
Correct driving position
Before taking to the road and to make the most
of the ergonomic layout of the instruments and
controls, carry out these adjustments in the
following order:
- the height of the head restraint,
- t he backrest angle,
-

t
he cushion height,
-

t
he longitudinal position of the seat,
-
t

he height and reach of the steering wheel,
-

t
he interior and door mirrors.
Once these adjustments have been made,
check the instrument panel can be viewed
correctly from your driving position.
Adjustments
Longitudinal
F Raise the control and slide the seat forwards or backwards.
Height
(driver only)
F If fitted to your vehicle, pull the control upwards to raise or push it downwards to
lower, as many times as necessary to obtain
the position required. For more information on the Seat belts
,
refer to the corresponding section.
Tilting the backrest
F Push the control backwards to adjust the backrest.
Lumbar
(driver only)
F Turn the knob manually to obtain the desired level of lumbar support.
Ease of use and comfort

62
F Lift the bar 2, located behind the seat,
to release the feet of the seat from their
anchorage in the floor.
F

T
ilt the entire seat for wards.
F

H
ook the strap 3 on the row 2 head restraint
rod.
Repositioning the seat
F

F
old the entire seat backwards.
F

C
heck that the seat belt is not trapped
during the manoeuvre.
Adjusting the height of the
head restraint
The head restraint has a frame with
notches which prevents it from lowering;
this is a safety device in case of impact.
The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be fitted and correctly
adjusted.
Never drive with passengers seated at
the rear when the head restraints are
removed or not in the high position; the
head restraints must be in place and in the
high position.
For more information on the Seat belts ,
refer to the corresponding section.
F

T
o remove it, press the lug A and pull it
upwards.
F

T
o put it back in place, engage the head
restraint rods in the openings keeping them
in line with the seat backrest.
F

T
o lower it, press the lug A and push down
on the head restraint at the same time.
Refitting the seat
F

P

ull on the strap 3 to open the seat
anchorages.
F

W

hile still holding the strap 3
, place the
anchorages in the anchorage points on the
f l o o r.
F

R

elease the strap 3
.
F

Ensure that no object or feet are obstructing
the rear anchorage points 4 and that the seat
belt is correctly positioned and available.
F Fold the seat backwards to fix its rear
anchorage feet.
F

U
se the control 1 to lift the backrest into the
initial position.
F

R
efit the head restraint.
Removing the seat
F

L

ower the head restraint as far as it will go.
F

P

lace the seat in the fully folded position.
F

P

ull on the strap 3 to open the seat
anchorages.
F

S

till holding the strap 3 , lift the seat.
F

T
o raise it, pull it upwards as far as possible
(n otc h).
Ease of use and comfort

87
Headlamp beam height
adjustment
To avoid causing a nuisance to other road
users, the height of the halogen headlamps
should be adjusted according to the load in the
vehicle.
0 Em pt y.
1 Partial load.
2 Medium load.
3 Maximum authorised load.
The initial setting is position 0 .
Wiper control stalk
Programming
Your vehicle may also include some functions
that can be activated/deactivated:
-
a

utomatic windscreen wipers,
-
r

ear wiping on engaging reverse gear.
In wintry conditions, remove snow, ice or
frost present on the windscreen, around
the wiper arms and blades and the
windscreen seal, before operating the
wipers.
Do not operate the wipers on a dry
windscreen. Under extremely hot or cold
conditions, ensure that the wiper blades
are not stuck to the windscreen before
operating the wipers.
Manual controls
The wipers are controlled directly by the driver.
With manual wiping (intermittent)
With AUTO wiping
Front wipers
Raise or lower the control stalk to the desired
position to change the wiping speed. Fast wiping (heavy rain).
Normal wiping (moderate rain).
Intermittent wiping (proportional to
the speed of the vehicle).
Of f.
Programming
The system is activated or
deactivated via the vehicle
configuration menu.
This system is activated by default.
4
Lighting and visibility

121
Side wind
F Take into account the increased sensitivity to wind.
Cooling
Towing a trailer on a slope increases the
temperature of the coolant.
As the fan is electrically controlled, its cooling
capacity is not dependent on the engine speed.
F

T
o lower the engine speed, reduce your
speed.
The maximum towable load on an incline
depends on the gradient and the exterior
temperature.
In all cases, keep a check on the coolant
temperature.
F

I
f this warning lamp and the
STOP warning lamp come on,
stop the vehicle and switch off
the engine as soon as possible.
New vehicle
Do not pull a trailer before having driven at least
approximately 620


miles (1,000

kilometres).
Braking
Towing a trailer increases the braking distance.
To avoid overheating of the brakes, the use of
engine braking is recommended.
Ty r e s
F Check the tyre pressures of the towing vehicle and of the trailer, observing the
recommended pressures.
Lighting
F Check the electrical lighting and signalling on the trailer and the headlamp beam height
of your vehicle.
For more information on Headlamp
beam height adjustment , refer to the
corresponding section.
Certain driving or manoeuvring aid
functions are automatically disabled if an
approved towing system is used.
If the exterior temperature is high, it is
recommended that the engine be allowed
to idle for 1 to 2
minutes after the vehicle
comes to a stop, to facilitate its cooling.
Starting/switching off the
engine
Starting
The parking brake must be applied.
F

W

ith a manual gearbox, shift the gear lever
into neutral, fully depress the clutch pedal
and keep the pedal down until the engine
runs.
F

W

ith an automatic gearbox, place the
selector in position P and fully depress the
brake pedal.
Using the conventional key/the
remote control key
1. Stop position.
2. Ignition on position.
3. Starting position.
6
Driving

138
Have it checked by a CITROËN dealer or a
qualified workshop.
If a fault occurs in STOP mode, the vehicle may
stall.
All of the instrument panel warning lamps come
on.
Depending on version, a warning message may
also be displayed, asking you to place the gear
selector in position N and to press the brake
pedal.
With the vehicle stationary, you must switch off
the ignition and then start the engine again.
Head-up display
System which projects various information onto
a smoked blade in the driver's field of vision so
that they do not have to take their eyes off the
road.
Displays during operation
A.The speed of your vehicle.
B. Cruise control/speed limiter information.
C. If your vehicle is so equipped, inter-
vehicle distance information, automatic
emergency braking alerts and navigation
instructions.
D. If your vehicle is so equipped, speed limit
information.
For more information on Navigation , refer
to the Audio equipment and telematics
section.
Buttons
Once the system has been activated, the
following information is grouped together in the
head-up display:
Activation/Deactivation
F With the engine running, press button 1 to activate the system and deploy the blade.
1. On.
2. Off (long press). 3.
Brightness adjustment.
4. Display height adjustment.
Height adjustment
F With the engine running, adjust the display
to the desired height using buttons 4 :
-

u
p to move the display up,
-

d
own to move the display down.
F

P
ress and hold button 2 to deactivate the
system and retract the blade.
The activated/deactivated state is saved and
restored on restarting the engine.
Driving