17
POWER LIFTGATE
POWER ASSIST STEPS♦
OPEN/CLOSE
THE POWER LIFTGATE
Press the Power
Liftgate button on the
Remote Keyless Entry
(RKE) transmitter twice.
Press the Power Liftgate
knob on the overhead
console.
Press the touchpad (A)
on the liftgate handle to
open the liftgate.
Press the button (B) next
to the liftgate latch to close the liftgate.
PROGRAMMING THE LIFTGATE HEIGHT
1. Turn the Power Liftgate knob to the 3/4 mode position.
2. Open the liftgate.
3. Adjust the liftgate manually to the
desired height.
4. To save the setting, press and hold the
button next to the liftgate latch (B)
for 3 seconds. The turn signals flash and a
beep sounds when the setting is saved.
HANDS-FREE OPERATION
To open or close the liftgate hands-free, kick your foot straight
in and out under the center of the rear bumper, or above the
vehicle logo projected on the ground
♦. Do not swing your foot
side-to-side.
The RKE transmitter must be within 3 feet of the liftgate.
See Keys, Doors and Windows in your Owner's Manual.
The power assist steps lower automatically when a door is opened
and retract after the doors are closed.
To deploy the steps for cleaning and car washes, with the
ignition on and the vehicle in Park or with the vehicle running
and in Neutral, select the
Run Board screen button on the
infotainment screen and then select the Extended option.
To disable or enable the steps, with the ignition on and the
vehicle in Park or Neutral, select the
Run Board screen
button and then select On or Off.
See Keys, Doors and Windows in your Owner's Manual.
SUNROOF ♦
OPEN/CLOSE
THE SUNROOF
Press the rear of the
SLIDE TILT Sunroof Tilt
switch to vent the
sunroof.
Fully press the rear of
the
SLIDE TILT Sunroof Slide
switch to express-open
the sunroof.
Fully press the front of
either SLIDE TILT
Sunroof
switch to express-close
the sunroof.
See Keys, Doors and Windows in your Owner's Manual.
A
B
♦
Optional equipment