2
Review this quick reference guide for an overview of some important features in your Cadillac
Escalade. Some optional equipment described in this guide (denoted by ♦) may not be included in
your vehicle. More information can be found in your Owner's Manual and at my.cadillac.com.Certain restrictions, precautions and safety
procedures apply to your vehicle. Please read
your Owner’s Manual for complete instructions.
INSTRUMENT PANEL
Cruise Control/
Voice Recognition/ Heated Steering Wheel Buttons
Instrument
Panel/Exterior Lamp Controls Head-Up
Display
Controls
♦
Windshield Wipers Lever
Audio Steering
Wheel Controls/
Driver Information Center Controls
Power Tilt/
Telescope Steering Wheel Control Instrument
Cluster/Driver Information Center
Engine Start/Stop Button
4WD
Control
Memory
Seat
Buttons Infotainment
System Touch
Screen
Heated/Cooled Seat Buttons Audio
System
Controls
Climate
Controls
Driver Mode Control/
Adjustable Pedals/
Traction Control and StabiliTrak Buttons Glove Box/Lane Keep
Assist♦/Park Assist/
Automatic Parking Assist♦
Power Mirror Control/ Door Lock Switch/Window Buttons
Press and hold the Cancel button to switch between regular
Cruise Control and Adaptive Cruise Control. When ACC is active, a
green
indicator illuminates and the following gap is displayed.
When the vehicle is turned on, the Cruise Control is set to the last
mode used.
Following Gap (Adaptive Cruise Control♦
)
Press repeatedly to set a following gap (the time between your
vehicle and a detected vehicle ahead) of Far, Medium, or Near.
When a slower vehicle is detected ahead, the
Vehicle Ahead
Indicator is displayed and the vehicle brakes to maintain the select -
ed following gap. The ACC system may slow your vehicle to a stop
behind the detected vehicle. When the ACC system is holding the
vehicle at a stop, be prepared to manually apply the brakes.
If driver action is required to apply sufficient braking behind a
detected vehicle, a red alert flashes on the windshield and the
Safety Alert Seat pulses or beeps sound (if selected). See Safety
Alert Seat on page 14.
Note: Changing the gap settings automatically changes the alert timing
sensitivity for the Forward Collision Alert system.
See Driving and Operating in your Owner's Manual.
VOICE RECOGNITION
Push to Talk
Press to interact with the OnStar, Bluetooth or Infotainment
system. Wait for the beep before speaking.
End Call/Mute
Press to end/decline a call or mute/unmute the audio system.
See Instruments and Controls in your Owner's Manual.
CRUISE CONTROL/ADAPTIVE
CRUISE CONTROL♦
On/Off
SET Set Speed
With Cruise Control on, press
the control bar down fully to
set the cruise speed. The
indicator illuminates in green.
RES Resume Speed
With Cruise Control on, press the control bar up fully to resume the
previous set speed. Adaptive Cruise Control♦ can be resumed from
a stop.
+ – Adjust Speed
When active, press the control bar up (+) or down (–) lightly to
increase or decrease the set speed by 1-mph increments; press and
hold to continue increasing/decreasing speed.
With Adaptive Cruise Control
♦, press and release the control bar
up (+) or down (–) to increase or decrease the set speed by 1-mph
increments; press and hold momentarily to increase or decrease
the set speed to the next 5-mph interval on the
speedometer.
Cancel
Press to cancel Cruise Control without erasing the set speed
from memory.
Switching between Regular Cruise Control and Adaptive
Cruise Control♦
Adaptive Cruise Control (ACC) maintains the driver-selected
following gap by braking or accelerating automatically while you
continue to steer.
5
STEERING WHEEL CONTROLS
♦ Optional equipment
