2019 Alfa Romeo Stelvio technical data

RIMS AND TYRES PROVIDED
183)
Version Wheels Tyres
2.0 T4 MAir
2.2 JTD17 x 7.5J 225/65 R17 102V
17 x 8J 235/65 R17 104V
18 x 8J 235/60 R18 103W
19 x 8J 235/55 R19 101Y
20 x 8.5J 255/45 R20 105V
Space saver spare wheel
(where provided)195/75 18 106P
NOTE In partnership with Pirelli, Alfa Romeo has developed a range of tyres specially for the Alfa Romeo Stelvio. They can be
identified by the “AR” mark. The “AR” tyres ensure the best vehicle performance and safety. Alfa Romeo cannot guarantee that
non-approved tyres are suitable, and they may cause vehicle malfunctions.
2.0 T4 MAir and 2.2 JTD engines: winter tyres are available in the following sizes: 235/65R17 108H, 235/60R18 103V,
235/55R19 101V and 255/45 R20 101W.
Always check the registration certificate for the tyres that can be installed (size, load index, speed symbol).Always check the
registration certificate for the tyres that can be installed (size, load index, speed symbol).
196
TECHNICAL DATA

SNOW CHAINS
79)
Rear Wheel Drive and All-wheel drive versions
It is possible to fit 0.5 in (13 mm) chains on all the tyres except for R20.
Important notes
The use of snow chains should be in compliance with local regulations of each country. In certain countries, tyres marked with code
M+S (Mud and Snow) are considered as winter equipment; therefore their use is equivalent to that of the snow chains.
IMPORTANT The snow chains may be applied only to the rear wheel tyres. Installing them on the rear wheel tyres could damage the
suspension and transmission.
Check the tension of the snow chains after the first few metres have been driven.
IMPORTANT Using snow chains with tyres with non-original dimensions may damage the vehicle.
IMPORTANT Using different size or type (M+S, snow, etc.) tyres between front and rear axle may adversely affect car driveability,
with the risk of losing control of the car and resulting accidents.
WARNING
183)If winter tyres with a lower speed rating than that indicated in the Registration Document are used, do not exceed the maximum speed
corresponding to the speed rating of the tyres used.
IMPORTANT
79)Keep your speed down when snow chains are fitted; do not exceed 50 km/h. Avoid potholes, do not drive over steps or sidewalks and do not
drive long distances over roads without snow, to avoid damaging both your vehicle and the road surface.
198
TECHNICAL DATA

WEIGHTS
Weights (lb / kg)2.0 T4 MAir
200 HP 280 HP
Unladen weight (with all fluids, fuel tank filled to 90% and without optional equipment) 3660 / 1660 3660 / 1660
Payload including the driver
(*)1411 / 640 1411 / 640
Maximum permitted loads
(**)
– front axle2359 / 1070 2359 / 1070
– rear axle2910 / 1320 2910 / 1320
– total5070 / 2300 5070 / 2300
Maximum combined load (permitted maximum load + towable weight trailer with brakes)
(***)8580 / 3900 10120 / 4600
Towable loads
– braked trailer3520 / 1600 5070 / 2300
– trailer without brakes1653 / 750 1653 / 750
Maximum load on roof165 / 75 165 / 75
Maximum load on tow hitch (trailer with brakes) 141 / 64 209 / 95
(*) If special equipment is fitted (trailer towing equipment, etc.) the empty weight will increase and consequently the payload will decrease in relation to the maximum
permitted loads.
(**) Loads not to be exceeded. The user is responsible for arranging goods in the luggage compartment and/or on the load platform within the maximum permitted loads.
(***) Never exceed the maximum combined vehicle load value: the maximum towable load is only allowed if it does not exceed the maximum combined vehicleload.
200
TECHNICAL DATA

REFUELLING
80) 81)
2.0 T4 MAir 2.2 JTDPrescribed fuels and original
lubricants
Fuel tank (UK gal / litres) 14 / 64
12.7 (58) / 14 (64)(*)
Unleaded petrol with RON no
lower than 95
(EN228 specifications)
(2.0 T4 MAir engine) / Automotive
diesel fuel (EN590 and
EN16734 specifications)
(2.2 JTD engine) including a reserve of (UK gal /
litres) (2.0 T4 MAir engine)2.11 / 9.6 –
including a reserve of (UK
gal/litres) (2.2 JTD engine with
12.7 UK gal/58 litre fuel tank)– 1.98 / 9.0
including a reserve of (UK
gal/litres) (2.2 JTD engine with
14 UK gal/64 litre fuel tank)– 2.2 / 10
AdBlue® tank (where provided)
(UK gal / litres)– 3.5 / 16.1AdBlue® (DIN 70 070 and ISO
22241-1 specifications)
(2.2 JTD engine)
Main tank cooling system (UK gal/
litres)1.93 (8.8) / 2.03 (9.25)
(**)1.71 (7.8) / 1.75 (8.0)(***)50% mixture of distilled water
and PARAFLU UP(*****)Secondary tank cooling system
(UK gal / litres)0.95 (4.3) / 1.15 (5.25)(**)1.03 (4.7)(****)
(*) For markets, where provided
(**) 280 HP versions
(***) 190 HP / 210 HP versions
(*****) When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLU UP and 40% demineralised water.
(****) Only 2.2 JTD 190 HP / 210 HP AWD versions with automatic transmission
202
TECHNICAL DATA

2.0 T4 MAir 2.2 JTDPrescribed fuels and original
lubricants
AWD System FAD transfer case
(UK gal / litres)0.11 / 0.5 0.11 / 0.5TUTELA TRANSMISSION
HYPOIDE GEAR OIL
AWD System TRANSFER CASE
(UK gal / litres)0.15 / 0.7 0.15 / 0.7TUTELA TRANSMISSION
TRANSFER CASE
IMPORTANT
80)Only use AdBlue®(UREA) compliant with DIN 70 070 and ISO 22241-1. Other fluids may cause damage to the system: also exhaust emissions
would no longer comply with the law.
81)The distribution companies are responsible for the compliance of their product. Observe the precautions of storage and maintenance, in order
to preserve the initial qualities. The manufacturer will not recognise any guarantee in case of malfunctions and damage caused to the car due to
the use of AdBlue
®not in accordance with regulations.
204
TECHNICAL DATA

Use Features SpecificationOriginal fluids and
lubricantsApplications
Lubricants and greases
fordrive transmissionATF Synthetic lubricant 9.55550-AV5TUTELA TRANSMISSION
AS 8
Contractual Technical
Reference No. F139.I11Automatic transmission
SAE 75W-85 synthetic
lubricant9.55550-DA9TUTELA TRANSMISSION
LS AXLE FLUID
Contractual Technical
Reference No. F059.N15Differential RDU 230-LSD
and RDU 210/215 -LSD
SAE 75W-85 API
GL-5 synthetic lubricant9.55550-DA8TUTELA TRANSMISSION
AXLE-DRIVE
Contractual Technical
Reference N°F058.N15Differentials and reduction
gears RDU 230-TV
(2.9 V6 engine)
SAE 75W-80 APL
GL-5 synthetic lubricant9.55550-DA10TUTELA TRANSMISSION
HYPOIDE GEAR OIL
Contractual Technical
Reference n° F060.N15AWD System FAD transfer
case
SAE 75W synthetic
lubricant9.55550-DA11TUTELA TRANSMISSION
TRANSFER CASE
Contractual Technical
Reference No. F061.N15AWD System TRANSFER
CASE
Lubricants and greases
for drive transmissionNLGI 0-1 grease for
constant velocity joints
with low friction
coefficient9.55580-GRAS IITUTELA STAR 700
Contractual Technical
Reference No. F701.C07Differential side constant
velocity joints
NLGI 1-2 molybdenum
disulphide grease for high
temperatures9.55580-GRAS IITUTELA ALL STAR
Contractual Technical
Reference No. F702.G07Wheel side constant
velocity joints
Brake fluid DOT 4 9.55597TUTELA BRAKE FLUID
EXTREME HT
Contractual Technical
Reference No. F001.N15Hydraulic brakes and clutch
controls
206
TECHNICAL DATA

PERFORMANCE
Top performance after the initial period of car usage.
Versions Maximum speed (mph / km/h)Acceleration from 0-60 mph /
(0-100 km/h) (sec.)
2.0 T4 MAir 200 HP AWD134 / 215 7.2
2.0 T4 MAir 280 HP AWD143 / 230 5.7
2.2 JTD 150 HP RWD
(*)123 / 198 8.8
2.2 JTD 160 HP RWD123 / 198 8.8
2.2 JTD 180 HP RWD
(*)130 / 210 7.6
2.2 JTD 190 HP RWD130 / 210 7.6
2.2 JTD 180 HP AWD
(*)130 / 210 7.6
2.2 JTD 190 HP AWD130 / 210 7.6
2.2 JTD 210 HP AWD134 / 215 6.6
(*) For versions/markets where specified
208
TECHNICAL DATA

PRESCRIPTIONS FOR HANDLING THE VEHICLE AT THE END OF ITS LIFE
(where provided)
For years, Alfa Romeo S.p.A. has pursued a global commitment to protect and respect the environment by continually improving its
production processes and developing increasingly "eco-compatible" products. To grant customers the best possible service in terms
of respecting environmental laws and in response to European Directive 2000/53/EC governing vehicles at the end of their life, Alfa
Romeo S.p.A. is offering its customers the chance to hand over their car at the end of its life without incurring any additional costs.
The European Directive sets out that when the vehicle is handed over the last keeper or owner should not incur any expenses as a
result of it having a zero or negative market value.
To hand your car over at the end of its life without extra cost, contact one of our dealerships if you are purchasing another car or an
Alfa Romeo S.p.A.-authorised collection and scrapping centre. These centres have been carefully chosen to offer high quality service
for the collection, treatment and recycling of vehicles at their end of life, respecting the surrounding environment.
You can find further information on these collection and scrapping centres either from an Alfa Romeo S.p.A. dealership or by calling
the number in the Warranty Booklet or by consulting the Alfa Romeo S.p.A. website.
210
TECHNICAL DATA