2019 Alfa Romeo Stelvio engine

ENGINE
2.0 T4 MAir200 HP 280 HP
CycleOtto
Otto
Number and position of cylinders 4 in line 4 in line
Piston bore and stroke (mm) 84 / 90 84 / 90
Total displacement (cm³) 1995 1995
Compression ratio 10 ± 0.35 10 ± 0.35
Maximum power (ECE) (kW) 148 206
Maximum power (ECE) (HP) 200 280
Corresponding engine speed (rpm) 4500 5250
Maximum torque (ECE) (Nm) 330 400
Maximum torque (ECE) (kgm) 33.6 40.8
Corresponding engine speed (rpm) 1750 2250
Spark plugsNGK ILZKR7G
FuelUnleaded petrol with R.O.N. no lower than 91
(EN228 specifications)
193

2.2 JTD 150 HP(*)160 HP 180 HP(*)190 HP 210 HP
Cycle Diesel Diesel Diesel Diesel Diesel
Number
and position of cylinders 4 in line 4 in line 4 in line 4 in line 4 in line
Piston bore and stroke (mm) 83 / 99 83 / 99 83 / 99 83 / 99 83 / 99
Total displacement (cm³) 2143 2143 2143 2143 2143
Compression ratio 15.5 ± 0.4 15.5 ± 0.4 15.5 ± 0.4 15.5 ± 0.4 15.5 ± 0.4
Maximum power (ECE) (kW) 110 118 132 140 154
Maximum power (ECE) (HP) 150 160 180 190 210
Corresponding engine speed (rpm) 4000 3750 3750 3500 3500
Maximum torque (ECE) (Nm) 450 450 450 450 470
Maximum torque (ECE) (kgm) 45.9 45.9 45.9 45.9 47.9
Corresponding engine speed (rpm) 1750 1750 1750 1750 1750
Fuel Automotive diesel fuel (EN590 and EN16734 specifications)
(*) For versions/markets where specified
194
TECHNICAL DATA

RIMS AND TYRES PROVIDED
183)
Version Wheels Tyres
2.0 T4 MAir
2.2 JTD17 x 7.5J 225/65 R17 102V
17 x 8J 235/65 R17 104V
18 x 8J 235/60 R18 103W
19 x 8J 235/55 R19 101Y
20 x 8.5J 255/45 R20 105V
Space saver spare wheel
(where provided)195/75 18 106P
NOTE In partnership with Pirelli, Alfa Romeo has developed a range of tyres specially for the Alfa Romeo Stelvio. They can be
identified by the “AR” mark. The “AR” tyres ensure the best vehicle performance and safety. Alfa Romeo cannot guarantee that
non-approved tyres are suitable, and they may cause vehicle malfunctions.
2.0 T4 MAir and 2.2 JTD engines: winter tyres are available in the following sizes: 235/65R17 108H, 235/60R18 103V,
235/55R19 101V and 255/45 R20 101W.
Always check the registration certificate for the tyres that can be installed (size, load index, speed symbol).Always check the
registration certificate for the tyres that can be installed (size, load index, speed symbol).
196
TECHNICAL DATA

COLD TYRE INFLATION PRESSURE
When the tyres are warm, the inflation pressure should be +4.35 psi (+0.3 bar) in relation to the recommended figure. However,
recheck that the value is correct with the tyre cold. If it is necessary to raise the vehicle, refer to the "Raising the vehicle" paragraph in
the "In an emergency" chapter.
The pressures given below apply to all tyre types: summer, winter and all season (where provided).
2.0 T4 MAir and 2.2 JTD engines
TyresUnladen/medium load [psi / bar] Full load [psi / bar]
Front Rear Front Rear
225/65 R1730.5 / 2.1 (*) 33.3 / 2.3 (*)
34.8 / 2.4 37.7 / 2.6
32 / 2.2 (**) 34.8 / 2.4 (**)
235/65 R17 30.5 / 2.1 33.3 / 2.3 33.3 / 2.3 37.7 / 2.6
235/60 R18 30.5 / 2.1 33.3 / 2.3 33.3 / 2.3 37.7 / 2.6
235/55 R19 30.5 / 2.1 33.3 / 2.3 33.3 / 2.3 37.7 / 2.6
255/45 R20 33.3 / 2.3 36.3 / 2.5 34.8 / 2.4 39.2 / 2.7
195/75 18
(Space-saver wheel)43.5 / 3.0
For 225/65 R17 tyres, in medium load conditions, there are two possible pressure settings depending on the mode required:
comfort (*) and ECO (**). Restore the inflation pressures accordingly. ECO configuration consumption is not guaranteed with comfort
configuration pressures.
If winter tyres are fitted, always use the same inflation pressures as for the tyres originally installed (table above). For
225/65 R17 tyres in medium load conditions, use the comfort configuration pressures.
197

REFUELLING
80) 81)
2.0 T4 MAir 2.2 JTDPrescribed fuels and original
lubricants
Fuel tank (UK gal / litres) 14 / 64
12.7 (58) / 14 (64)(*)
Unleaded petrol with RON no
lower than 95
(EN228 specifications)
(2.0 T4 MAir engine) / Automotive
diesel fuel (EN590 and
EN16734 specifications)
(2.2 JTD engine) including a reserve of (UK gal /
litres) (2.0 T4 MAir engine)2.11 / 9.6 –
including a reserve of (UK
gal/litres) (2.2 JTD engine with
12.7 UK gal/58 litre fuel tank)– 1.98 / 9.0
including a reserve of (UK
gal/litres) (2.2 JTD engine with
14 UK gal/64 litre fuel tank)– 2.2 / 10
AdBlue® tank (where provided)
(UK gal / litres)– 3.5 / 16.1AdBlue® (DIN 70 070 and ISO
22241-1 specifications)
(2.2 JTD engine)
Main tank cooling system (UK gal/
litres)1.93 (8.8) / 2.03 (9.25)
(**)1.71 (7.8) / 1.75 (8.0)(***)50% mixture of distilled water
and PARAFLU UP(*****)Secondary tank cooling system
(UK gal / litres)0.95 (4.3) / 1.15 (5.25)(**)1.03 (4.7)(****)
(*) For markets, where provided
(**) 280 HP versions
(***) 190 HP / 210 HP versions
(*****) When the vehicle is used in particularly harsh weather conditions, we recommend using a 60% mixture of PARAFLU UP and 40% demineralised water.
(****) Only 2.2 JTD 190 HP / 210 HP AWD versions with automatic transmission
202
TECHNICAL DATA

2.0 T4 MAir 2.2 JTDPrescribed fuels and original
lubricants
Engine oil filter (UK gal / litres) 0.13 / 0.6 0.11 / 0.5SELENIA DIGITEK P.E.
(2.0 T4 MAir engine) / SELENIA
W.R. FORWARD 0W-20 (2.2 JTD
engine) (versions with AdBlue®) /
SELENIA W.R. FORWARD 0W-20
(2.2 JTD 150 HP / 180 HP
engines) (versions without
AdBlue®) / SELENIA W.R.
FORWARD 0W-30 (2.2 JTD
210 HP engines) (versions without
AdBlue®) Engine oil sump (UK gal / litres) 1.01 / 4.6 0.85 / 3.9
Hydraulic brake circuit
(UK gal / litres)0.2 / 0.9 0.02 / 0.9TUTELA BRAKE FLUID
EXTREME HT
Windscreen washer tank
(UK gal / litres)0.9 / 4.1 0.92 /4.2 PETRONAS DURANCE SC 35
Automatic transmission
(UK gal / litres)– 2.0 / 9.1
TUTELA TRANSMISSION AS8 Automatic transmission AWD
(UK gal / litres)2.05 / 9.3 –
Automatic transmission RWD
(UK gal / litres)2.07 / 9.4 –
RDU 230-LSD differential
(UK gal / litres)0.2 / 0.9 0.2 / 0.9
TUTELA TRANSMISSION LS
AXLE FLUID
RDU 210/215-LSD differential
(UK gal / litres)0.24 / 1.1 0.24 / 1.1
203

FLUIDS AND LUBRICANTS
Your vehicle is equipped with an engine oil that has been thoroughly developed and tested in order to meet the requirements of the
Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the fuel consumption and emission specifications.
Lubricant quality is crucial for engine operation and duration.
82)
PRODUCT SPECIFICATIONS
ENGINE LUBRICATION
Use Features SpecificationOriginal fluids and
lubricantsReplacement interval
2.0 T4 MAirSAE 0W-30
ACEA C29.55535–GS1SELENIA DIGITEK P.E.
Contractual Technical
Reference No.F020.B12According to Scheduled
Servicing Plan
2.2 JTDSAE 0W-20
ACEA C29.55535–DSXSELENIA W.R. FORWARD
0W-20
Contractual Technical
Reference No. F013.K15According to Scheduled
Servicing Plan
2.2 JTD 210 HP
(*)SAE 0W-30
ACEA C29.55535–DS1SELENIA W.R. FORWARD
0W-30
Contractual Technical
Reference N°842.F13According to Scheduled
Servicing Plan
(*) Versions without AdBlue - UREA.
If lubricants conforming to the specific request are not available, products that meet the indicated specifications can be used to top
up; in this case optimal performance of the engine is not guaranteed.
205

Use Features SpecificationOriginal fluids and
lubricantsApplications
Lubricants and greases
fordrive transmissionATF Synthetic lubricant 9.55550-AV5TUTELA TRANSMISSION
AS 8
Contractual Technical
Reference No. F139.I11Automatic transmission
SAE 75W-85 synthetic
lubricant9.55550-DA9TUTELA TRANSMISSION
LS AXLE FLUID
Contractual Technical
Reference No. F059.N15Differential RDU 230-LSD
and RDU 210/215 -LSD
SAE 75W-85 API
GL-5 synthetic lubricant9.55550-DA8TUTELA TRANSMISSION
AXLE-DRIVE
Contractual Technical
Reference N°F058.N15Differentials and reduction
gears RDU 230-TV
(2.9 V6 engine)
SAE 75W-80 APL
GL-5 synthetic lubricant9.55550-DA10TUTELA TRANSMISSION
HYPOIDE GEAR OIL
Contractual Technical
Reference n° F060.N15AWD System FAD transfer
case
SAE 75W synthetic
lubricant9.55550-DA11TUTELA TRANSMISSION
TRANSFER CASE
Contractual Technical
Reference No. F061.N15AWD System TRANSFER
CASE
Lubricants and greases
for drive transmissionNLGI 0-1 grease for
constant velocity joints
with low friction
coefficient9.55580-GRAS IITUTELA STAR 700
Contractual Technical
Reference No. F701.C07Differential side constant
velocity joints
NLGI 1-2 molybdenum
disulphide grease for high
temperatures9.55580-GRAS IITUTELA ALL STAR
Contractual Technical
Reference No. F702.G07Wheel side constant
velocity joints
Brake fluid DOT 4 9.55597TUTELA BRAKE FLUID
EXTREME HT
Contractual Technical
Reference No. F001.N15Hydraulic brakes and clutch
controls
206
TECHNICAL DATA