2018 VAUXHALL CASCADA Owner's Manual

Page 121 of 265

VAUXHALL CASCADA 2018  Owners Manual Lighting119Parking lights
When the vehicle is parked, the
parking lights on one side can be
activated:
1. Switch off ignition.
2. Move turn signal lever all the way up (right parking lights) or down
(

Page 122 of 265

VAUXHALL CASCADA 2018  Owners Manual 120LightingTurn thumb wheel A and hold until
the desired brightness is obtained.
On vehicles with light sensor, the
brightness can only be adjusted when
the exterior lights are on and the light sensor

Page 123 of 265

VAUXHALL CASCADA 2018  Owners Manual Lighting121Lighting features
Entry lighting Welcome lighting
The following lights are switched on
for a short time by unlocking the
vehicle with the radio remote control:
● headlights
● tail light

Page 124 of 265

VAUXHALL CASCADA 2018  Owners Manual 122LightingExit lighting is switched off
immediately if the turn signal lever is
pulled while the drivers door is open.
Activation, deactivation and duration of this function can be changed in the In

Page 125 of 265

VAUXHALL CASCADA 2018  Owners Manual Climate control123Climate controlClimate control systems.............123
Heating and ventilation system 123
Air conditioning system ...........124
Electronic climate control system ...................

Page 126 of 265

VAUXHALL CASCADA 2018  Owners Manual 124Climate controlDemisting and defrosting
●Press  V: fan automatically
switches to higher speed, the air
distribution is directed towards
the windscreen.
● Set temperature control to warmest leve

Page 127 of 265

VAUXHALL CASCADA 2018  Owners Manual Climate control125If no cooling or drying is required,
switch off the cooling system for fuel
saving reasons. Activated cooling
may inhibit Autostops.
Stop-start system  3 136.
Air recirculation syste

Page 128 of 265

VAUXHALL CASCADA 2018  Owners Manual 126Climate controlDemisting and defrosting the
windows  V
●
Press  V; fan automatically
switches to higher speed, the air
distribution is directed towards
the windscreen.
● Set temperature control