2018 TOYOTA HIGHLANDER HYBRID light

HIGHLANDER HV 2018
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental
operations so you can locate and use the vehicle’s main
equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for
the Owner’s Manual located in your vehicle’s glove box. We
strongly encourage you to review the Owner’s Manual and
supplementary manuals so you will have a better understanding
of your vehicle’s capabilities and limitations.
Your dealership and the entire staff of Toyota Motor North
America, Inc. wish you many years of satisfied driving in your
new Highlander HV.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Highlander HV
operations. Every Highlander HV owner should review the Owner’s Manual that
accompanies this vehicle.
Pay special attention to the boxed


information highlighted in color throughout
the Owner’s Manual. Each box contains safe operating instructions to \
help you


avoid injury or equipment malfunction.
All information in this Quick Reference Guide is current at the time of \
printing.
Toyota reserves the right to make changes at any time without notice.

1
INDEX
Engine maintenance 9
Fuel tank door release & cap
8
Hood release
8
Indicator symbols
4-5
Instrument cluster
4
Instrument panel
2-3
Instrument panel light control
8
Keyless entry1,2 6-7
Smart Key system1,2 7
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructio\
ns and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
OVERVIEW
FEATURES & OPERATIONS FEATURES & OPERATIONS (continued)
SAFETY & EMERGENCY FEATURES TOYOTA SAFETY SENSE™ P (TSS-P)
Air conditioning1,2/heating 24
Audio
23
Auto lock/unlock1 12
Clock
12
Door locks1,2 12
Driver Easy Speak
22
ECO drive mode
11
EV drive mode
11
Garage door opener (HomeLink®)3 25
Hybrid Synergy Drive System
10
Hybrid transmission
11
Lights1,2 & turn signals1 19
Moonroof1 14
Multi-Information Display (MID)2 20
Panoramic moonroof
14
Parking brake
12
Power Liftgate (back door)1,2 15
Power outlets-
12V DC/120V AC/USB 2.1A
21
Rear seat entertainment system
22
Seat adjustments-Front
16
Seat adjustments-Rear
17
Seat heaters/ventilators
25
Seats-Head restraints
17
Seats-Stowing &
returning 3rd row seats
17
Steering lock release
13
Steering wheel switches &
telephone controls (Bluetooth
®) 13 Tilt & telescopic steering wheel
16
USB 2.0/AUX port
20
Vehicle Stability Control (VSC)/
TRAC OFF switch
22
Windows-Power1 18
Windshield wipers & washers1 18
Automatic High Beams (AHB) 35-36
Dynamic Radar
Cruise Control (DRCC)
32-35
Lane Departure Alert with Steering
Assist function (LDA w/SA)
29-32
Pre-Collision System with Pedestrian
Detection function (PCS w/PD)
27-29
Quick overview-
Toyota Safety Sense™ P (TSS-P)
26
Sensors
26
BLUETOOTH® DEVICE
PAIRING SECTION 42-51
Floor mat installation
41
Rear door child safety locks
38
Seat belt reminder indicator
37
Seat belts
37
Seat belts-3rd row center
37
Seat belts-Shoulder belt anchor
37
Spare tire & tools
39
Star Safety SystemTM 40-41
Tire Pressure Monitoring
(warning) System (TPMS)
38
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES

2
Steering wheel controls
Audio remote
control switches2Multi-Information Display
(MID) switchesDynamic Radar Cruise
Control
(DRCC)
Dynamic Radar
Cruise Control
(DRCC) vehicle-
to-vehicle distance
button
Lane Departure
Alert (LDA) switch
Tilt and telescopic steering
lock release lever
Headlight, turn signal and front fog light
1 controls
Windshield wiper and
washer controls
Meters/Multi-information display (MID)
“ENGINE
START STOP”
button
(Smart Key)
Hood lock release lever Fuel tank door release lever
Tire pressure warning reset switch
Windshield wiper de-icer switch
Heated steering wheel switch
1
Parking assist sensors switch1,2
Automatic High Beam (AHB) switch
Birds Eye View Camera switch
1,2
Power back door switch1
Voice command switch2
Telephone
switches2
OVERVIEWInstrument panel

4
Automatic High Beam (AHB)
indicator
For details, refer to “Indicators and warning lights,” Section 2-2\
, 2018 Owner’s
Manual.
Airbag SRS warning2
Air Bag ON/OFF indicator2
Anti-lock Brake System (ABS)
warning2
Brake system warning2
Blind Spot Monitor (BSM)
outside rear view mirror indicator1
Blind Spot Monitor (BSM)
indicator1
EV indicator
EV drive mode indicator
ECO drive mode indicator2
Constant speed cruise control
indicator/Constant speed cruise
control SET indicator
Electric power steering system
warning2
Driver’s and front passenger’s seat
belt reminder
(alarm will sound if speed is over 12 mph)
Dynamic Radar Cruise Control
(DRCC)(vehicle-to-vehicle distance
control mode) indicator/DRCC
SET indicator
OVERVIEW
Instrument cluster
Indicator symbols
Engine coolant temperature gauge Shift position and
shift range
Hybrid System Indicator Multi-Information Display (MID)
Speedometer
Fuel gauge
Outside temperature
Trip meter reset knob
Odometer/trip meter display

Instrument panel light control button
Service indicators and reminders

5
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
1 If equipped.2
If indicator does not turn off within a few seconds of starting engine, \
there may be a malfunction.
Have vehicle inspected by your Toyota dealer.
Front Fog light indicator1
Fuel tank door position
“READY” indicator
Pre-Collison System (PCS) warning2
Malfunction/Check Engine indicator2
Master warning2
Intuitive parking assist indicator1
Headlight low/high beam
indicator
Low fuel level warning
Parking brake warning
2
Land Departure Alert with Steering
Assist (LDA w/SA) indicator
Slip indicator2
Security indicator
Tire Pressure Warning2
Turn signal indicator
Vehicle Stability Control (VSC) OFF
indicator2
2nd and 3rd row seat belt reminder
indicator (warning buzzer)
Vehicle proximity notification
system warning2

8
NOTE: To close, tighten until one click is heard. If the cap is not tightened
enough, Check Engine “
” indicator may illuminate.
Turn to openStore
Engage support rod
Pull When the fuel door cannot
be opened by pressing the
inside switch. Remove the
cover inside the luggage
compartment and pull the
lever.Pull up the auxiliary catch
lever and raise hood
The brightness level of the meters when the surroundings are bright (da\
y mode)
and dark (night mode) can be adjusted individually. However,when in da\
y mode,
adjusting the brightness level will also change the brightness level of \
night mode.
Fuel tank door release & cap
Hood release
Instrument panel light control
OVERVIEW

10
(1)
Put the selector lever in “P.”
(2) Depress the brake pedal, and “
” will be displayed on the Multi-Information
Display.
(3) Press the “POWER” switch briefly and firmly.
(4) The “READY” light will blink. After a few seconds, when the light \
remains steady
and a beep sounds, you may begin driving.
The Hybrid Synergy Drive System utilizes a computer-controlled gasoline \
engine
and electric motor to provide the most efficient combination of power fo\
r the
vehicle. To conserve energy, when the brakes are applied the braking for\
ce
generates electricity which is then sent to the traction battery. In add\
ition, the
engine shuts off when the vehicle is stopped. The benefits are better fu\
el economy,
reduced vehicle emissions and improved performance.
NOTE: Fuel consumption and energy information of the Hybrid System are shown on the Multi-Information Display and/or navigation system
screen (if equipped).
1. Ensure tire pressures are maintained at levels specified in the Owner’s Manual.
2. Link trips to reduce engine cold starts whenever possible.
3. Avoid driving at speeds that are higher than necessary, especially on\
the highway.
4. When possible, avoid sudden stops to maximize regenerative braking en\
ergy.
5. Minimize use of the Air Conditioning.
FEATURES & OPERATIONS Hybrid Synergy Drive System
TIPS FOR IMPROVED FUEL ECONOMY
STARTING THE HYBRID SYSTEM

14
SHADE OPERATIONTILTING OPERATION
SLIDING OPERATIONTILTING OPERATION
Moonroof (if equipped)
Panoramic moonroof (if equipped)
FEATURES & OPERATIONS
Tilt
Close
Recommended open position to
minimize wind noise.
Push once to open partway;
again to open completely.
If the moonroof is open, pressing the switch
closes it up to the tilt-up position.
If the shade is closed past the half-open position
when the switch is pressed, it will open up to the
half-open position.
To stop operation partway, quickly slide and
release the switch again.
Close
Open
The moonroof stops slightly before the fully open position to reduce win\
d noise
and the shade opens fully. Slide the switch again to fully open or close\
the
moonroof.
SLIDING OPERATION