Page 17 of 56

15
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Power Liftgate (back door) (if equipped)
PushPush and hold
Instrument panel
Open and close
Open: Push and hold
Close: Push and hold again
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
Refer to
the Owner’s Manual for more details.
Open only
1. When the liftgate reaches the desired height, push the rear liftgate \
close-button (on the door jam of the liftgate) once. Press and hold the button unti\
l the buzzer
sounds.
2. To reset the height, with the liftgate open and not moving, press and\
hold the rear liftgate close-button until it buzzes, and continue to hold until i\
t buzzes
again -then let go. Push the same button to close the liftgate. When you\
next
open the liftgate it will open to the maximum height.
3. The height can also be set through the “Setup” screen on the au\
dio display. Setup > Vehicle Customization > Other Vehicle Settings > Power Back Door\
Opening Adjust. Through this screen, there are 5 height options to choos\
e
from.
NOTE: If the liftgate has stopped operating, check inside the glove box, on
the left side, to ensure the PWR DOOR OFF button has not been pushed.
For detailed instructions, see Owner’s Manual.
PROGRAMMABLE POWER LIFTGATE
Remote
control
(with
Smartkey)
Page 18 of 56
16
MANUAL SEAT
POWER SEAT AND DRIVING POSITION MEMORY (IF EQUIPPED)
Hold wheel, push lever down, set angle and length, and return lever.
Angle
Lock release lever
NOTE: Do not attempt to adjust while the vehicle is in motion.
Length
Seatback angle
Memory
position 1
Memory
position 2
Set memory
position
Seatback angle
Seat position
(forward/backward)
Seat cushion
(front) angle
(driver’s side only)
Seat height
(driver’s side only)
Seat cushion length
(if equipped,
driver’s side only) Lumbar
support
(driver’s side only)
Tilt & telescopic steering wheel
Seat adjustments-Front
FEATURES & OPERATIONS
Seat position
(forward/backward)
Height crank
(driver’s side only)
Page 19 of 56
17
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Second row type 1 Second row type 2Third row seat
Refer to the Owner’s Manual for more details.
Pull
(1) Pull(2) Raise
Seat position
(forward/backward) Seat position
(forward/backward)
Seatback angle Seatback angle
adjustment straps
Seatback angle
Height Lock release button Lock release button Lock release button
FrontSecond rowThird row
Height Height
Seat adjustments-Rear
Seats-Head restraints
Seats-Stowing & returning 3rd row seats
Page 20 of 56
18
Single wipeInterval wipe
Off
Push to Wash and wipe
1 Intermittent windshield wiper
frequency adjustment
Rotate to increase/decrease wipe
frequency.
2 Rain-sensing windshield wipers
Rotate to increase/decrease sensor
sensitivity. (if equipped)Temporary
operation
Rain sensing
(AUTO)Low
HighAdjust sensitivity2
Pull to wash
and wipe
Interval wipe
Mist
Slow
Fast
Adjust frequency
1
Pull to wash
and wipe
Up
Down
Automatic operation front row or all-position (if equipped)
Push the switch
completely down or pull it completely up and release to fully open or cl\
ose. To stop
the window partway, operate the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
DRIVER SIDE WINDOW LOCK SWITCH
FEATURES & OPERATIONS
Windshield wipers & washers
FRONT-INTERMITTENT
FRONT-AUTO (RAIN-SENSING) (IF EQUIPPED)
REAR
Windows-Power
Page 21 of 56

19
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Front fog lights come on only when the headlights are on low beam.
Daytime Running Light system (DRL) Automatically turns on the headlights at a
reduced intensity. Automatic light cut off system Lights automatically turn off after a delay of 30
seconds, or when lock switch on remote is pushed after all doors are loc\
ked.
Automatic High Beam (AHB) system Automatically switches between high and
low beams as appropriate to provide the most light possible and enhance \
forward
visibility. Refer to Toyota Safety Sense™ P (TSS-P) in this guide o\
r the Owner’s
Manual for more details on the Automatic High Beam feature.
* Operating conditions must be met. Refer to Owner’s Manual for detai\
ls.
Parking lights
Auto
DRL OFF Headlights
Turn
Right turn
Lane change
Lane change Left turn
Low beam
High beam
or
Auto High Beam*
High beam
flasher
Lights & turn signals
HEADLIGHTS
FRONT FOG LIGHTS (IF EQUIPPED)
TURN SIGNALS
Page 22 of 56
20
Press: Displays the screen registered as the top
screen
Press and hold: Registers the currently displayed
screen as the top screen
4.2” COLOR DISPLAY
Push MID control switches to view or change information in the following\
:
Drive information
Navigation system linked display (if equipped)
Audio system-linked display (if equipped)
Driving assist information
Warning messages
Settings display
Enter/Set/ResetSelect an item/
change pages
Return to the
previous screen
By inserting a mini plug into the USB 2.0/AUX port, you can listen to mu\
sic from
a portable audio device through the vehicle’s speaker system while in\
USB/AUX
mode.
Note: USB 2.0 for using auxiliary purpose.
Multi-Information Display (MID)
FEATURES & OPERATIONS
USB 2.0/AUX port
Page 23 of 56
21
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES
Instrument panel
USB 2.1A12V DC
Center console (front)
12V DC
The “ENGINE START STOP” switch must be in the ACCESSORY or IGNITIO\
N ON
position to be used.
Note: USB 2.1A for charging devices only.
Center console (rear)
120V AC(if equipped)
USB 2.1A
Power outlets-
12V DC/120V AC/USB 2.1A (
if equipped)
Page 24 of 56

22
Refer to section 7-1 of the Navigation System Owner’s Manual for more\
information.
Vehicle Stability Control (VSC)/
TRAC OFF switch
The VSC OFF switch can be used to help free a stuck vehicle in surroundi\
ngs like
mud, dirt or snow. While car is stopped, press switch to disable the TRA\
C system.
To disable both VSC and TRAC systems, press the switch for at least 3 se\
conds.
Refer to the Owner’s Manual for more details.
This feature utilizes the vehicle’s built-in microphone to amplify th\
e driver’s voice
through the rear speakers. To activate this feature, select “Driver E\
asy Speak” from
the Apps screen on the audio unit. The feature must be turned on every t\
ime you
enter the vehicle, and automatically turns off when any door (including\
the liftgate) is
opened. There are 7 volume settings.
Audio System
Rear seat entertainment
system (DVD player)
Remote controlAV input port
Rear seat entertainment system (if equipped)
Driver Easy Speak (if equipped)
FEATURES & OPERATIONS