Page 87 of 164
4. WHAT TO DO IF... 4. WHAT TO DO IF...
In other situati ons
Symptom Likely cause Solution
Page
Cellular
phone
This
system
Despite all efforts the symptom status does not change.
The cellular phone is not close enough to this system.
Manually connect the cellular phone you wish to use to this system.
* -
Radio interference has occurred.
Turn off Wi- Fi® devices or other devices that may emit radio waves.
* -
The cellular phone is the most likely cause of the symptom.
Turn the cellular phone off, remove and reinstall the battery pack. Then restart the cellular phone. (In case the cellular phone does not have a removable battery, RESET the cellular phone)
* -
Enable the cellular phone’s Bluetooth®
connection. * -
Disable the Wi- Fi® connection of the cellular phone. * -
Stop the cellular phone’s security software and close all applications.
* -
Before using an application installed on the cellular phone, carefully check its source and how its operation might affect this system.
* -
∗: For details, refer to the owner’s manual that came with the cellular phone.
87
Page 88 of 164
4
SETUP
1 SETUP OPER ATION
1. QUICK REFERENCE .......... ... ...... 89
2. GENERAL SETTINGS. ... ... ... ... ..... 90
3 . DISPLAY SETTINGS….. ........ ..... 93
4. PHONE SETTIN GS....... .............. 95
5. Blueto oth® SETTINGS ............. ... . 96
Bluetooth® FUNCTION ON/OFF........ 96
PAIRING A Bluetooth® DEVICE.... ..... 97
PAIRED DEVICE LIST….................... 101
EDITING THE SYSTEM NAME……. 102
SETTING PIN……………………….... 102
6 . AUDIO SETTINGS.. ..................... 103
7. VEHICLE SETTINGS ……......... ... 105
88
Page 89 of 164
1.SETUPOPERATION
1.QUICKREFERENCE
1.SETUPOPERATION
Tocustomize the function settings, pressthe button.
“Se tup” SCREEN
No.FunctionPage
Selecttosetlanguage,operation,sound,etc.90
Select to adjust the contrast and brightness of the screens, turn the
screen off,etc93
Selecttoadjustphonenotification,ringtone,setaphonebook.95
Select to connect to Bluetooth®devices. Settingsareavailable for
Bluetooth®phonesandBluetooth®audiodevices.96
Select to configure map settings: map layout, day/night mode, arrival
information,speedlimits,etc.152
Select to configu renavigation operation: route preferen ces,
avoidance criteria.155
Selecttochoosevehiclemodelspecificconfiguration.105
No. Fu
1
2
3
4
5
6
7
1234
567
1. QUICK REFERENCE
89
Page 91 of 164
1. SETUP OPERATION 1. SETUP OPERATION
No. Functi on
Select to change the language.
Select to set the volu me for the phone/navigation. ( →P.92)
Select to change the unit of meas ure for distance.
Select to set the sounds beeps on/ off.
Select to set the automatic text
scrolling on/off. This function is not available while driving.
The entries s tored in the “ Favorites ” list of Phone and “Favorite destination” list of Navigation can be transferred to a USB
memory. (→P.150 )
“vCard” for matted data can be transferred from a USB memory to the Premium Audio syste m. Transfer red a ddresses and numbers will be stor ed in the
“Favorites ” list of Phone (→ P.69) and “ Favorite destination” list of
Navigation. ( →P.147)
Select to delete all personal data
stored in this system. ( →P.92)
Select to display the system
information. Select the “Audio in formati on”
on the screen to switch the second page.
Select to display the open source
information. Notices related to third party software used in this pr oduct are enlisted. ( This includes instr uctions for obtaining such softwa re, wher e applicable.)
INFORMATION
Where applicable t he curren t setting of
each item is d isplay ed o n its ri ght.
1
2
3
4
5
6
7
8
9
10
91
Page 92 of 164
1.SETUPOPERATION1.SETUPOPERATION
VOLUMESETTINGS
Volumeisshown numerically for each
of the different functions.
1Disp lay the “Setup ” screen then select
“ General ”. (→ P.89)
2Select “Volume settings ”.
3Select “+”or“-” toadjust the
volume.
DELETE ALL PERSONAL DATA
1Display the “Setup ” screen then select
“ General ”. (→ P.89)
2Select “Delete all perso nalda ta”.
3Select “Yes” when the confirmation
scree n appe ars.
Regist ered or ch angedpersonal
s et tings wi llbe deleted or returned to
th eir def ault conditi ons.
No.Item
Navigation prompt volume
Reception volume for phone calls
Sending volume for phonecalls
Ringtone volume
Voice dialog volume
1
2
3
4
5
4
5
1
2
3
92
Page 95 of 164
1.SETUPOPERATION1.SETUP OPERATION
No.Function
Select to set the incoming shortmessage announcement functi onon/off.
Select to set the desiredring-tone.
Select to set the desir ed sorting
method of the phone book entries of thePremium Audio system phonebooklist.
Select to update the phone book ofthe connected phone manually. Theupdating takes place by refreshing the phone book list inthePremium Audio system and phone.
Settings are available forring-tone
selection, announci ng i ncoming short
messages and e-mailsetc.
1Disp lay the “Setup ” screen. (→P.89)
2Select “Phone”.
4
3Select i tems tobe set.
INFORMA TION
The current setting of each item is
displ ayed on its ri ght(wher eap plicab le).
4. PHONE SETTINGS
1
2
3
4
95
Page 96 of 164
1.SETUPOPERATION1.SETUPOPERATION
Settings are available for Bluetooth®
devices.
1D ispl ay the “Setup” scr een. ( →P.8 9)
2Select “Bluetooth” .
3Selectitems tobe set.
No.FunctionPage
Bluetooth®function on/off96
Premium Audio System to
search Bluetooth®devices97
Make system discoverable
by other Bluetooth®devices99
List of previously paired devices101
Setting Premium Audio System name and PIN102
Bluetoot h®FU NCTION ON/OFF
1Select “Bluetooth* ”.
When “Bluetooth*” ison:
Vehic les with out smart entry& start
sys tem
Th e Bl uetooth
®device is
automa ticall y con nected w hen the
ignition is turned tothe “A CC”or“ON”
position.
Vehicles withsmart entry& start
system
Th e Bl uetooth
®device is
automa ticall y con nected w hen the
ignition is turned to ACCESSORY or
IGNITION ON mode.
When “Bluetooth*” is off:
Th e Blueto oth
®device is d isconn ected,
and the system w ill not connect to it
next time when the ignition isturn edto
ACCESSORY or IGNITIONON mode.
Even if the Bluet oo th®function is set
to off, itwill turn on a utomat ically whe n
a phone or other Bl uetooth
®devic e is
connect ed.
*:Blue tooth is a regi steredtrademark
of Bluetooth S IG, Inc.
*
:Bluetooth isa registered trademark of
Bluetooth SIG,Inc.
1
2
3
4
5
1
2
3
4
5
5. BLUETOOTH®SETTINGS
96
Page 98 of 164
1. SETUP OPERATION
1. SETUP OPERATION
X If the au tomatic connecti on failed, the
foll owing screen will be dis playe d.
Select t he desired p rofile to b e
conn ected.
On ce you have connected the Bl uetooth®
devi ce, it is automa tically connected
wh enever the ignition is in the foll owing
st atus.
Vehic les w ith out smart entry & start
sys tem
The ignition is turned to the “ACC” or
“ON” pos ition.
Vehicles with smart entry & start system
The ignition is turned to ACCESSORY or
IGN ITI ON ON mode.
INFORM ATION
Fo r de tails on de vice detection and the
op erat ion of your Bl uetooth® device, see
th e manual that comes with your
Bl uet ooth
® device.
Th e music profiles the pair ed device
supports can be co nnected individual ly as
des ired . Som e devices do not al low
i nd ividua l pro file s to be connect ed. In that
ca se, a pop-up wi ndow is di splaye d
No. Function
Select to connect the phone profile.
Select to connect the music profile.
Select to connect all supported profiles.
1
2
3
98
