2018 TOYOTA CAMRY HYBRID jump start

5127-2. Steps to take in an emergency
If you have a set of jumper (or booster) cables and a second vehicle
with a 12-volt battery, you can jump start your vehicle by following the
steps below.
Confirm that the electronic key
is being carried.
When connecting the jumper (or
booster) cables, depending on the
situation, the alarm may activate
and doors locked. ( →P. 87)
Open the hood and remove the
fuse box cover.
Push the tabs in and lift the lid off.
Open the exclusive jump start-
ing terminal cover.
If the 12-volt bat tery is discharged
The following procedures may be used to start the hybrid sys-
tem if the vehicle’s 12-volt battery is discharged.
You can also call your Toyota de aler or a qualified repair shop.
1
2
3

5137-2. Steps to take in an emergency
7
When trouble arises
Connect the jumper cables according to the following procedure:Connect a positive jumper cabl e clamp to the exclusive jump
starting terminal on your vehicle.
Connect the clamp on the other e nd of the positive cable to the
positive (+) battery terminal on the second vehicle.
Connect a negative cable clamp to the negative (-) battery termi-
nal on the second vehicle.
Connect the clamp at the other end of the negative cable to a
solid, stationary, unpainted metallic point away from the exclusive
jump starting terminal and any moving parts, as shown in the
illustration.4
1
2
3
4

5147-2. Steps to take in an emergency
Start the engine of the second vehicle. Increase the engine speed
slightly and maintain at that level for approximately 5 minutes to
recharge the 12-volt battery of your vehicle.
Open and close any of the doors of your vehicle with the power
switch off.
Maintain the engine speed of the se cond vehicle and turn the power
switch to ON mode, then start the vehicle's engine.
Make sure the “READY” indicato r comes on. If the indicator does
not come on, contact your Toyota dealer.
Once the hybrid system has start ed, remove the jumper cables in
the exact reverse order from which they were connected.
Close the exclusive jump starting terminal cover, and reinstall the
fuse box cover to its original position.
Once the hybrid system starts, ha ve the vehicle inspected at your
Toyota dealer as soon as possible.5
6
7
8
9
10

5187-2. Steps to take in an emergency
WARNING
■When replacing the 12-volt battery
After replacing, securely attach the exhaust hose and exhaust hole plug to
the exhaust hole of the replaced 12-volt battery. If not properly installed,
gases (hydrogen) may leak into the vehicle interior, and there is the possi-
ble danger of the gas igniting and exploding.
NOTICE
■When handling jumper cables
When connecting the jumper cables, ensure that they do not become entan-
gled in the cooling fan or engine drive belt.
■ To prevent damaging the vehicle
The exclusive jump starting terminal is to be used when charging the 12-volt
battery from another vehicle in an emergency. It cannot be used to jump
start another vehicle.

584Alphabetical index
Emergency, in case ofIf a warning buzzer sounds ................................ 480
If a warning light turns on...... 480
If a warning message is displayed ............................ 490
If the 12-volt battery is
discharged .......................... 512
If the electronic key does not operate properly ................. 509
If the hybrid system will not start ........................ 507
If you have a flat tire ............. 496
If you lose your keys ............. 147
If you think something is wrong.................................. 479
If your vehicle becomes stuck ................................... 523
If your vehicle has to be
stopped in an emergency ... 475
If your vehicle needs to be towed .................................. 476
If your vehicle overheats ....... 519
Engine ACCESSORY mode ............. 205
Compartment ........................ 416
Engine switch........................ 204
Hood ..................................... 414
How to start the hybrid
system ......... ....................... 204
Identification number ............ 527
If your vehicle has to be
stopped in an
emergency.......................... 475
Ignition switch (power switch) .................... 204
Overheating .......................... 519
Power switch......................... 204 Engine coolant
Capacity................................ 530
Checking............................... 420
Preparing and checking before winter ...................... 338
Engine coolant temperature gauge ....................................... 96
Engine oil Capacity................................ 529
Checking............................... 417
Preparing and checking before winter ...................... 338
Engine switch .......................... 204
Enhanced VSC ......................... 283
Entune Audio
*
Entune Audio Plus*
Entune Premium Audio*
EPS (Electric Power Steering) ..... 284
Warning light......................... 481
EV drive mode ......................... 210
Event data recorder (EDR).......... 9
Exclusive jump starting terminal .................................. 512