2018 SUBARU WRX set clock

(187,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
market and vehicle specifications.Multi-function display
1) Clock
2) Climate control (displayed only when the
ignition switch is in the“ON”position)
3) Outside temperature
4) Information screen
NOTEThe outside temperature indicator
shows the temperature around the
sensor. Therefore, the temperature in-
dication may differ from the actual
outside air temperature.&Welcome screenWhen the driver’s door is closed, the
welcome screen will appear for a short
time.NOTE.The welcome screen will disappear
when the ignition switch is turned to the
“ON”position while the welcome
screen is displayed.
.You can set the welcome screen to
on or off. For details, refer to“Bypass
screen setting”F3-58.
.For a certain period of time after the
welcome screen has once appeared, it
may not appear again even when the
driver’s door is closed again. This does
not indicate a malfunction.
&Self-check screenWhen the ignition switch is turned to the
“ON”position, the vehicle self-check will
be performed. The screens corresponding
to the following items will appear one after
another for several seconds each.1) Inspection and maintenance: Checks the
interval of inspection and maintenance.
2) Engine oil: Checks the interval of engine
oil replacement.
3) Oil filter: Checks the interval of oil filter
replacement.
4) Tires: Checks the interval of tire rotation.When the checks are performed, the color
of the icon corresponding to the checked
item will turn as follows:
.If the checked item has no notifications,
it turns green.
.If the checked item has any mainte-
–CONTINUED–
Instruments and controls/Multi-function display (color LCD)
3-45
3

(190,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
Content Description Page
Fuel consumption screen Displays fuel consumption screen. 3-48
Triple meter screen Displays up to 3 optional items. 3-49
Prevention safety screen Displays the status of your vehicle. 3-49
Boost pressure screen Displays the boost pressure, etc. 3-50
Guidance screen Enters the setting screen 3-50
Clock/calendar screen Displays the clock/calendar.3-51
!Fuel consumption screen1) Average fuel consumption corresponding
to the driving distance of each trip meter
2) Current fuel consumption
3) Driving range on remaining fuelNOTEThe driving range on the remaining fuel
is only a guide. The indicated value may
differ from the actual driving range on
the remaining fuel, so you must im-
mediately fill the tank when the low fuel
warning light illuminates.
Instruments and controls/Multi-function display (color LCD)
3-48

(193,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
!Clock/calendar screenClockCalendarYou can select the clock or calendar to be
displayed. You can also turn the screen off.
For the setting procedure, refer to“Clocksetting”F3-57.
–CONTINUED–
Instruments and controls/Multi-function display (color LCD)
3-51
3

(194,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
&Setting screenPush and hold the ENTER button to display the setting screen. Select the preferred menu by operating the“
”or“
”switch.
Top menu Menu option Description Page
Time/Date
Date Set and adjust the date. 12h or 24h format can be selected. 3-55
Birthday Set a birthday. (max. 5) 3-55
Anniversary Set an anniversary day. (max. 5) 3-55
Daylight Saving Time Turn the daylight saving time on or off 3-56
Go Back Return to the top menu.—
Display
Contrast Adjust the contrast. +5↔53-56
Screen Off Turn the screen on or off. On or Off 3-56
Beep Adjust the beep sound volume. High, Low or Off 3-57
Go Back Return to the top menu.—
Screen
SettingTriple Meter Set and customize the triple meter. 3-57
Clock Select the clock format. Analog Clock, Calendar or Off 3-57
Bypass Screen Set the bypass screen for each item. On or Off 3-58
Languages Select the display language.English or French or Spanish
(U.S.-spec. models only)3-58
Camera Shift Link Set the front view monitor On or Off 3-58
Go Back Return to the top menu.—
Instruments and controls/Multi-function display (color LCD)
3-52

(199,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
!Beep setting
1. Select“Beep”from the 2nd menu in
the setting screen. Refer to“Setting
screen”F3-52.
2. Set the beep volume by using the
control switches.
3. Select“Set”to exit settings. Select“Go
Back”to return to the previous screen
without applying the setting changes.!Screen settings
!Triple meter setting
1. Select the“Triple Meter”from the 2nd
menu in setting screen. Refer to“Setting
screen”F3-52.
2. Set the desired items by using the
control switches. For details about items,
refer to“Triple meter screen”F3-49.
3. Select“Set”to exit settings. Select“Go
Back”to return to the previous screen
without applying the setting changes.NOTE.You can display a maximum of the 3
items.
.The same item cannot be selected
for the left, center or right location.!Clock setting
1. Select“Clock”from the 2nd menu in
the setting screen. Refer to“Setting
screen”F3-52.
2. Select“Analog Clock”,“Calendar”or
“Off”by using the control switches.
3. Select“Set”to exit settings. Select“Go
Back”to return to the previous screen
without applying the setting changes.
–CONTINUED–
Instruments and controls/Multi-function display (color LCD)
3-57
3

(237,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
both side windows to prevent fogging.)(Heat-def):Windshield defroster outlets,
foot outlets and both side outlets of the
instrument panel (Refer to“Defrosting”
F4-9.)(Defrost):Windshield defroster outletsand both side outlets of the instrument
panel (Refer to“Defrosting”F4-9.)
NOTEWhen the“
”or“
”mode is se-
lected, the air conditioner compressor
operates automatically regardless of
the position of the air conditioner
button to defrost the windshield more
quickly. However the indicator on the
air conditioner button will not illumi-
nate. At the same time, the air inlet
selection is automatically set to the
outside air mode. After defrosting the
windshield by pressing the defroster
button“
”, pressing the button again
returns the system to the setting that
had been selected before the defroster
was activated.
&Temperature controlTurn the temperature control dial to set the
preferred interior temperature. With the
dial set to your preferred temperature, the
system automatically adjusts the tempera-
ture of air supplied from the outlets so that
the preferred temperature is achieved and
maintained.
If the dial is turned fully counterclockwise,
the system provides maximum cooling
performance. If the dial is turned fully
clockwise, the system provides maximumheating performance.
NOTEThe controllable temperature range
may vary depending on the regional
specifications of the vehicle.
!“DUAL”mode (type B)1) Driver’s side temperature
2) Front passenger’s side temperatureYou can change the setting of the driver’s
side and front passenger’s side tempera-
ture independently by selecting the
“DUAL”mode.
Perform either of the following procedures
to select the“DUAL”mode.
.Press the“DUAL”button
.Turn the passenger’s side temperature
–CONTINUED–
Climate control/Manual climate control operation
4-7
4

(293,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
!Control screen and audio panelNo. Function&1
Select to display the audio source
selection screen.
&2
Select to open the station list. Refer to
“Station list”F5-50.
&3
Select to skip the current track.
&4
The track pauses when touched during
playback and plays when touched dur-
ing pause.
&5
Select to set thumbs up.
This gives a high rating to the current
song.
All other similar songs will be played
back more frequently.No. Function
&6
Select to set thumbs down.
This gives a low rating to the current
song.
All other similar songs will be played
back less frequently.
When you select thumbs down, the
current track is skipped.
&7
During playback of a station, you can
use this key to bookmark a song or
artist. Refer to“
Registering Bookmarks”
F5-50.
&8
Turn to adjust volume.
Press to turn the audio system on/off.
&9
Turn clockwise to skip to the next track.
Press to select an audio source. Refer
to“
Selecting an audio source”F5-17.
&10
Press to display the sound setting
screen. Refer to“
Unit settings”F5-18.
No. Function&11
Press to skip to the next track/cover art.
!Connecting a smartphone
Connect the iPhone/iPod touch to the USB
port or connect the Android device by
using Bluetooth connection (SPP and
A2DP profile).
.For details about connecting an
iPhone/iPod touch: Refer to“Connecting
and disconnecting a USB memory/porta-
ble device”F5-16.
.For details about registering or con-
necting an Android device: Refer to“Re-
gistering/connecting Bluetooth
®
device”
F5-64.
!How to change the source
The Pandora operation screen can be
reached by the following methods:
.Connecting a Pandora device. Refer to
“Connecting a Bluetooth device”F5-67 or
“Connecting and disconnecting a USB
memory/portable device”F5-16.
.Select the“Pandora”key on the source
select screen. Refer to“Selecting an audio
source”F5-17.
.Select the“Pandora”key on the APPS
screen. Refer to“SUBARU STARLINK”
F5-25.
–CONTINUED–
Audio/Audio set
5-49
5

(368,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
.When opening the cap, grasp it
firmly and turn it slowly to the left.
Do not remove the cap quickly.
Fuel may be under pressure and
spray out of the fuel filler neck,
especially in hot weather. If you
hear a hissing sound while you
are removing the cap, wait for the
sound to stop and then slowly
open the cap to prevent fuel from
spraying out and creating a fire
hazard.3. Set the fuel filler cap on the cap holder
inside the fuel filler lid.
WARNING
.When refueling, insert the fuel
nozzle securely into the fuel filler
pipe. If the nozzle is lifted or not
fully inserted, its automatic stop-
ping mechanism may not func-
tion, causing fuel to overflow the
tank and creating a fire hazard.
.Stop refueling when the auto-
matic stop mechanism on the
fuel nozzle activates. If you con-
tinue to add fuel, temperature
changes or other conditions
may cause fuel to overflow from
the tank and create a fire hazard.
4. Stop filling the tank after the fuel filler
pump automatically stops. Do not add any
more fuel.
5. Put the cap back on, turn it clockwise
until you hear a clicking noise. Be certain
not to catch the tether under the cap while
tightening.
CAUTION
Make sure that the cap is tightened
until it clicks to prevent fuel spillage
in the event of an accident.
6. Close the fuel filler lid completely.
CAUTION
If you spill any fuel on the painted
surface, rinse it off immediately.
Otherwise, the painted surface
could be damaged.NOTE.You will see the“
”sign in the fuel
gauge. This indicates that the fuel filler
door (lid) is located on the right side of
the vehicle.
.If the fuel filler cap is not tightened
until it clicks or if the tether is caught
under the cap, the CHECK ENGINE
warning light/malfunction indicator
light may illuminate. Refer to“CHECK
ENGINE warning light/Malfunction in-
dicator light”F3-16.
CAUTION
.Never add any cleaning agents to
the fuel tank. The addition of a
cleaning agent may cause da-
mage to the fuel system.
.After refueling, turn the cap
clockwise until it clicks to ensure
that it is fully tightened. If the cap
is not securely tightened, fuel
may leak out while the vehicle is
Starting and operating/Fuel
7-6