Setting menusMenu option: submenus with an effect = D a t a t r a n s f e r a c t i v e : R e g i s t r a t i o n: R e m o v e s a f e l y : This option serves to remove an
inserted SD card or connected USB device safely. F a c t o r y s e t t i n g s : You can restore the R a d i o,
M e d i a ,
S o u n d and
S y s t e m factory settings sepa-
rately or all at once. S y s t e m i n f o r m a t i o n : Unit technical data dis-
play. C o p y r i g h t : Data of the software used.a)
Valid only for the FM frequency range.
b)
The function depends on the country and unit.
Operation of speed-dependent volume in- crease
The speed-dependent volume adjustment automatically changes the volume based onthe speed of the vehicle .
The volume increase can be adjusted be- tween 1
and 7
.
If the level selected is low, the volume will on- ly increase slightly when the speed increases;if it is high, the volume will increase signifi-cantly. At 0
the speed-dependent volume in-
crease volume is off.
Operation of D A B - F M L I N K
If reception of the currently selected DAB sta- tion is lost (e.g. no DAB reception availableany more), the unit attempts to find the sta-tion and tune to it on the FM frequency range.
Automatic station tracking on all frequenciesonly works if the DAB station and the FM sta-
tion broadcast the same station identifier or the DAB signal indicates the correspondingFM station.
Once the corresponding FM station has been found, ( F M )
is displayed after the station
name. When reception for the corresponding DAB station returns, after a short time the unit
will switch back to DAB mode.
If the signal is too weak and the DAB station cannot be found again on the FM band, the
radio sound is muted.25
