Driver assistance systems
to the presence of metallic objects (e.g. rails
on the r oad or sheets used in r
oad w
orks).
The area in front of and around the radar
sensor should not be covered with adhesives,
additional or similar headlights, as this may
negatively affect Front Assist operation.
If the front of the vehicle is not properly re-
paired or structural modifications are made
to it, for example if the suspension is lowered,
Front Assist operation may be affected. SEAT
recommends visiting a SEAT dealership for
this purpose. CAUTION
If you have the sensation that the radar
sensor is damaged or has lost its settings, disconnect the Fr ont Assist. This will av
oid
possible dangerous situations caused by a
system malfunction. If this occurs have it
adjusted.
Driving
Lane Assist system* Intr oduction Fig. 277
On the windscreen: field of vision of
the L ane Assist syst
em camer
a.Using the camera located in the windscreen,
the L
ane Assist syst
em det
ects the possible
lines dividing the lanes. When the vehicle in-
voluntarily approaches a dividing line it has
detected, the system notifies the driver with a
corrective steering movement. The purpose is
not only to warn the driver, but also to keep
the vehicle inside the lane. This movement
can be over-regulated at any time.
No warning is produced with the turn signals
activated, given that the Lane Assist system
understands that a lane change is required. Control lamp "
It lights up yellow
Lane Assist active but not available.
The system cannot accurat
ely recognise the lane.
Please see page 286, Lane Assist system is not avail-
able (the control lamp is lit up yellow). "
It lights up green
Lane Assist system active and available. Some control and warning lamps will light up
briefly when the ignition is s
wit
ched on t
o
check certain functions. They will switch off
after a few seconds. WARNING
Observe the safety warnings