2018 Seat Leon Owner's manual

Towing bracket device
Placing in standby position Fig. 292
Step 1. Fig. 293
Step 2. Before assembling it, place the detachable
ball in the st
andby position with the f
oll
owing
two steps. Step 1.

Driving
Thus adjusted, the detachable ball is ready
f or inst
all
ation. CAUTION
The key cannot be removed or turned in the
standby position. Fitting the tow hitch Step 1
Fig. 295
Fitting the detachable ball / Release
bolt in the depl oyed position.Fitting the detachable ball

Towing bracket device

Driving
WARNING
Never remove the detachable ball joint
when the trail er is hit
ched.Note
Before you remove the detachable ball,
you are advised t o pl

ace the protective
cover on the ball coupling. Removing the tow hitch. Step 2
Fig. 301
Releasing the detachable ball. Do not omit this first step

Towing bracket device
Trailer towing What do you need t o bear in mind
when t o
wing a trailer?Your vehicle may be used to tow a trailer
when fitted with the corr
ect equipment.
If you wish t

o retrofit a towing bracket, con-
sult

Driving
Hitching and connecting the trailer Fig. 302
Diagram: assignment of the pins of
the trail er

Towing bracket device
WARNING
The towing bracket ball coupling must be
stor ed secur
ely in the luggage compart-
ment to prevent them being flung through
the vehicle and causing injury. Note

Driving