2018 Seat Ibiza service

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand,
that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no
right at all may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or
omission, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the “Copyright” Act.
All rights on changes are reserved.
❀This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.11.18
Vehicle identification data
Model:
Vehicle Registration:
Vehicle identification
number:
Date of vehicle registration
or vehicle delivery:
SEAT Official Service:
Service advisor:
Telephone:
Confirmation of receipt of documentation
and vehicle keys
The following items were delivered
with the vehicle: YES
NO
On-board documentation
First key
Second key
Correct working order of all keys was
checked
Location:





Date:
Signature of owner:

The essentials
Note
The vehicles must not touch each other,
otherwise electricit y coul
d flow as soon as
the positive terminals are connected. Changing the windscreen
wiper blades
Changing the wiper bl adesFig. 82
Wipers in service position. Fig. 83
Changing the windscreen wiper blade. To change the blades it is necessary to move
the wipers fr
om the r
est position int

o the serv-
ice position.
Do not change the windscreen wipers when
out of the service position, as it could cause
paint to flake off the bonnet due to friction
with the windscreen wiper arm.
Service position (for changing wiper
blades)

Emergencies
Side turn signals Fig. 110
Turn signal integrated in the rear view
mirr or The side turn signals are LEDS and are inte-
gr
at
ed in the r
ear view mirrors.
In case of failure, go to an authorised work-
shop to have it replaced.
Additional brake light Given the difficulty involved in the replace-
ment of this light it shoul
d be done by Techni-
cal Services. Changing the int

erior bulbs
Interior light and front r
eading
lights Fig. 111
Front reading light. To remove the glass

Operation
Inspection of compressed natural gas
t anks (CNG) r
eminder
When l
ess than 90 days for the review of the
compressed natural gas tanks (CNG), when
the ignition is switched on, the instrument
panel display will a reminder for review of
the gas tanks and an audible warning will be
emitted.
As approaches the service date of inspection
of the gas tanks, the message and the audi-
ble warning will stop modify accordingly.
Check a service warning
With the ignition switched on, the engine off
and the vehicle at a standstill, the current
service notification can be read:
Check the date of the current service on the
infotainment system

Lights and visibility
Driving abroad The light beam of the dipped beam lights is
asymmetric: the side of the road on which
you ar e driving is lit mor
e intensely.
When a car that is manufactured in a country
that drives on the right travels to a country
that drives on the left (or vice versa), it is nor-
mally necessary to cover part of the head-
light bulbs with stickers or to change the ad-
justment of the headlights to avoid dazzling
other drivers.
In such cases, the regulations specify certain
light values that must be complied with for
designated points of the light distribution. This
is known as “Tourist light”.
The light distribution of the halogen and full-
LED headlights allows the specific “tourist
light” values to be met without the need for
stickers or changes in the settings. Note
“Tourist light” is only allowed temporarily. If
you are pl anning a l

ong stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights. Headlight range control
Fig. 145
Instrument panel: headlight range
contr ol. The lights range control adapts according to
the v
alue of the headlight beam and the v
ehi-
cl

e load status. This offers the driver optimum
visibility and the headlights do not dazzle on-
coming drivers

Operating modes
Possible functions
Enter the coun-
try code To enter a country code, instead
of the first two digits (int
erna-
tional access code e
.g. “00”)
you can enter the character “+ ”.
Press the function button 0 for
approx. 2 seconds t

o add the +.
Breakdown
service call > Press the function button to ob-
tain help in the e
v

ent of break-
down. For this the network of
SEAT dealerships is available to
you with their Mobility Service.
Information call

Accessories and modifications to the vehicle
Practical tips
Accessories and modifi-
cations t o the v
ehicl
e
Accessories and modifica-
tions to the vehicle Accessories, replacement of parts
and modifications Your vehicle is designed to offer a high stand-
ar
d of activ
e and passiv

e safety.
Before purchasing accessories and parts,
and before making technical changes to your
vehicle, we recommend that you consult your
Technical Service.
SEAT dealerships will be happy to provide
you with the latest information about the use,
legal requirements and recommendations
from the manufacturer regarding accessories
and spare parts.
We recommend you use only SEAT Ap-
proved Accessories

Practical tips
reason, we recommend you have service flu-
ids and consumabl es r
epl
aced by a Techni-
cal Service. Please observe the relevant in-
structions