Winch Operation
Removing The Spare Tire
1. Remove the spare tire before attempting tojack up the vehicle. Attach the lug bolt
adapter to the winch extension and insert it
into the winch mechanism. The winch mechanism is located under the
rear of the vehicle to the right of the spare
tire.
2. Rotate the wheel wrench handle counter- clockwise until the spare tire is on the
ground with enough cable slack to allow you
to pull it out from under the vehicle.
Winch Location
Jack Tools
1 — Wrench Handle
2 — Lug Bolt Adapter
3 — Winch Extension
Winch Location
JACKING AND TIRE
CHANGING
NOTE:
The winch mechanism is designed for use with
the winch extension tube only. Use of an air
wrench or other power tools is not recom-
mended and can damage the winch.3. Pull the spare tire out from under the ve-
hicle to gain access to the spare tire re-
tainer.
4. Lift the spare tire with one hand to giveclearance to tilt the retainer at the end of the
cable.
5. Pull the retainer through the center of the wheel.
Winch Extension
Lowering Spare Tire
Spare Tire
