2018 Peugeot iOn audio

3
.
bit.ly/helpPSA
.
Access to additional videos
Driving recommendations 68
Starting-switching off the vehicle 6 8
Parking brake

6
9
Drive selector

6
9
Tyre under-inflation detection

7
0
Recharging the main battery
7

5
Snow chains

8
2
Bonnet

8
3
Front compartment

8
4
Rear compartment
8

4
Checking levels

8
5
Checks
86
Changing a wiper blade
8

7
Washing precautions

87A

ncillaries battery 8 8
Temporary puncture repair kit 9 0
Spare wheel

9
3
Changing a bulb
9

5
Changing a fuse

1
01
Towing the vehicle

1
05
Motor and main battery

1
06
Weights
10

7
Dimensions
1

08
Identification markings
1

09
Driving
Practical information In the event of a breakdown
Technical data Alphabetical index
Bluetooth® audio system
KENWOOD – KDC-X7000DAB
Audio equipment and telematics
.
Contents

4
Instruments and controls1
Interior rear view mirror
2
Electric window controls
3
Opening of the charging flaps
4
Peugeot Connect USB – USB Player
5
Parking brake
6
Audio system
7
Ventilation
Heating
Manual air conditioning
Automatic air conditioning
Windscreen demisting/defrosting
Rear screen demisting/defrosting
8
Bonnet release
9
12 V accessory socket
10
Drive selector
Over view

29
Peugeot Connect USB – USB Player
This USB port allows the connection of a
portable device, such as an iPod® type digital
audio player, or a USB memory stick.
It reads the audio files which are sent to your
audio system, to be listened to through the
vehicle's speakers.
You can manage these files using the audio
system controls.
When connected to the USB port, the portable
device can be charged automatically.
For more information on how to use this
equipment, refer to the section on Audio
equipment and telematics .
Ventilation
System which creates and maintains good
conditions of comfort and visibility in the
vehicle's passenger compartment.
Air intake
The air circulating in the passenger
compartment is filtered and originates either
from the outside via the grille located at the
base of the windscreen or from the inside in air
recirculation mode.
Controls
The incoming air follows various routes
depending on the controls selected.
The temperature control gives you the desired
level of comfort by mixing the air of the various
circuits.
The air distribution control is used to select
the air vents to be used in the passenger
compartment.
The air flow control enables you to increase or
reduce the speed of the ventilation fan.
These controls are grouped together on control
panel A on the centre console.
Air distribution
1.Windscreen demisting/defrosting vents.
2. Front side window demisting/defrosting
vents.
3. Adjustable and closable side air vents.
4. Adjustable and closable central air vents.
5. Air outlets to the front footwells.
3
Ease of use and comfort

68
Driving recommendations
Observe the driving regulations and remain
vigilant whatever the traffic conditions.
Pay close attention to the traffic and keep your
hands on the steering wheel so that you are
ready to react at any time to any eventuality.
As a safety measure, the driver must only carry
out any operations that require close attention
when the vehicle is stationary.
On a long journey, a break every two hours is
strongly recommended.
In bad weather, drive smoothly, anticipate the
need to brake and increase the distance from
other vehicles.
Important!
Never drive with the parking brake applied – Risk of overheating and damage to the
braking system!
Never leave a vehicle unsuper vised with
the motor running. If you have to leave
your vehicle with the motor running,
apply the parking brake and put the drive
selector into position N or P.
Driving on flooded roads
We strongly advise against driving on flooded
roads, as this could cause serious damage
to the motor or gearbox, as well as to the
electrical systems of your vehicle.
If you are obliged to drive through water:
-

c
heck that the depth of water does not
exceed 6 inches (15
cm), taking account
of waves that might be generated by other
users,
-

d
rive as slowly as possible. In all cases, do
not exceed 6
mph (10 km/h).
On leaving the flooded road, as soon as
circumstances allow, make several light brake
applications to dry the brake discs and pads.
If in doubt about the state of your vehicle,
contact a PEUGEOT dealer or a qualified
workshop.
Starting-switching off the
vehicle
Ignition switch
- Position 1: LOCK .
The steering is locked.
-

P
osition 2: ACC .
The accessories (audio system, 12V socket,
etc.) can be used.
-

P
osition 3: ON .
Switching on the ignition.
-

P
osition 4: S TA R T .
"Ready" lamp lights up.
Engine operation.
If you use accessories for a prolonged
period of time (with the switch in position
ACC ), you risk discharging the ancillaries
battery. Starting your vehicle will then no
longer be possible. Be careful.
Driving

90
F Disconnect the cable from the (-) terminal.
F L ift the protective cover from the (+)
terminal


2.
F

S
lacken the nut 3 .
F

D
isconnect the cable from the (+) terminal.
F

R
emove the battery.
F

C
harge the battery following the instructions
on use provided by the manufacturer of the
battery charger.
F

R
econnect the battery starting with the
cable on the (+) terminal.
Ensure that the terminals and connectors
are clean. If they are covered with
sulphate (whitish or greenish deposit),
remove and clean them. Do not charge the battery without first
disconnecting the terminals and removing
the battery from the front compartment.
Do not disconnect the terminals when the
"Ready" lamp is on, nor when the vehicle
is on charge.
Before disconnecting
Wait 2
minutes after switching off the
ignition before disconnecting the battery.
After reconnection
Following reconnection of the battery,
switch on the ignition and wait 1 minute
before starting, to permit initialisation of
the electronic systems. However, if minor
problems persist following this operation,
contact a PEUGEOT dealer or a qualified
workshop.
Remember to reinitialise the audio system
yourself.
Batteries contain harmful substances such as
sulphuric acid and lead. They must be disposed
of in accordance with local regulations and
must not, in any circumstances, be discarded
with household waste.
Take used remote control batteries and vehicle
batteries to a designated collection point.
Temporary puncture
repair kit
Scan the QR code on page 3 to view
explanatory videos.
Complete kit comprising a compressor and a
sealant bottle, which allows the temporary
repair of a tyre so that you can drive to the
nearest garage.
It is designed to repair most punctures which
could affect the tyre, located on the tyre tread
or shoulder.
Access to the kit
This kit is stored in the storage box located
under the rear bench seat, right-hand side.
Therefore, to access the kit you must remove
the rear seat.
In the event of a breakdown

102
Fuses in the dashboard
The fusebox is located in the lower dashboard.
Access to the fuses
F
U
nclip the protective cover and remove it
completely by pulling it towards you. Fuse No.
Rating Functions
1 7. 5 AFront and rear left sidelamps.
2 15 AAccessory socket.
3 -Not used.
4 7. 5 AStarter motor.
5 20 AAudio system.
6 -Not used.
7 7. 5 ADashboard consumers, front and rear right sidelamps.
8 7. 5 AElectric door mirrors.
9 7. 5 ASupervisor.
10 7. 5 AAir conditioning.
11 10 ARear foglamp.
12 15 ADoor locks.
13 10 ACourtesy lamp.
In the event of a breakdown

1
Bluetooth® audio system
Contents
First steps
1
R

adio 2
Media

3
T

elephone

6
Audio settings
8
C

onfiguration

8
Frequently asked questions

9
F

or safety reasons, the vehicle must
always be stationary for the driver to
perform operations that require close
attention.
When the engine is switched off and to
prevent discharging of the battery, the
system switches off after activation of
energy economy mode. After a battery disconnection, a code must
be entered to access the audio system
functions.
You can try five times at most. There is
approximately fifteen minutes waiting time
between each of the last two tries.
Go to the end of this document to recover
the label indicating the code:
First steps
On/Off, volume adjustment.
Adjust audio options: sound
ambience, treble, bass, loudness,
distribution, left/right balance, front/
rear balance, automatic volume.
Automatic search for a lower radio
frequency.
Select the previous CD, USB track.
Scroll in a list.
Press and hold: rewind.
Display the list of stations received,
the CD/USB tracks or folders.
Press and hold: update the list of
stations received.
Cancel the current operation.
Go up one level (menu or folder).
Automatic search for a higher radio
frequency.
Select the next CD, USB track.
Scroll in a list.
Press and hold: fast for ward.
Access to the main menu.
.
Bluetooth® audio system

2
Select preset radio station.
Radio, press and hold: store a
station.
Other than radio: see the
corresponding sections.
Eject CD.
Select the source:
Radio: FM1, FM2, CD, USB, AUX,
Streaming.
Telephone: accept an incoming call.
Telephone, press and hold: end
a call, access the calls log for the
connected telephone.
Radio
Presetting a station
Press SRC/TEL repeatedly to select
the FM1, FM2 or AM waveband.
Press and hold a button to preset
the station being listened to. The
name of the station is displayed and
an audible signal confirms that it has
been preset. The external environment (hills, buildings,
tunnels, basement car parks, etc.) may
block reception, including in RDS tracking
mode. This is a normal effect of the way
in which radio waves are transmitted and
does not indicate any failure of the audio
equipment.
Selecting a station
Press a button to listen to the
corresponding preset station.
Managing a list
Press LIST
to display the list of
stations received in alphabetical
o r d e r.
Select the desired radio station
using one of the buttons.
Confirm with " OK".
Briefly press one of the buttons to
change to the next or previous letter.
Press and hold LIST to build or
update the list of stations; audio
reception is cut momentarily.
Entering a frequency
Press MENU .
Select "Radio ".
Select "Enter or Write freq. ".
Press + ,
or press – to select the desired
frequency.
Confirm with " OK".
RDS
RDS, if activated, allows you to
continue listening to the same station
by automatically retuning to alternative
frequencies. However, in certain conditions,
coverage of an RDS station may not be
assured throughout the entire country as
radio stations do not cover 100% of the
territory. This explains the loss of reception
of a station that can occur during a journey.
With source FM1 or FM2, press
MENU .
Select "Radio ".
Bluetooth® audio system