2018 Peugeot 208 fold seats

32
Reinitialising the remote
control
Following replacement of the battery or in
the event of a remote control fault, it may be
necessary to reinitialise the remote control.
F

S
witch off the ignition.
F

T
urn the key to position 2

(Ignition on).
F

P
ress the closed padlock button for a few
seconds.
F

S
witch off the ignition and remove the key
from the switch.
The remote control is now fully operational
again.
Boot
Opening
F After unlocking the boot or the vehicle using the remote control or the key, press
the opening control, then raise the tailgate.
Closing
F Lower the tailgate using the interior grab handle.
F

I
f necessary, press down on the tailgate to
fully close it.
If the tailgate is not fully closed:
-

w
ith the engine running ,
this warning lamp comes on,
accompanied by the display of an
alert message for a
few seconds,
-

w
hen driving (speed above 6
mph
(10
km/h)), this warning lamp comes on,
associated with an audible signal and
the display of an alert message for a
few
seconds. In the event of a
fault or difficulties felt in
manoeuvring the tailgate when opening
or closing it, have it quickly checked
by a PEUGEOT dealer or a qualified
workshop to stop this issue getting worse
and so as to not cause the tailgate to drop,
and serious injuries.
Backup control
System for mechanical unlocking of the boot in
the event of a central locking malfunction.
Unlocking
F Fold the rear seats to gain access to the lock from inside the boot.
F

I
nsert a small screwdriver into hole A of the
lock to unlock the boot.
F

M
ove the latch to the left.
Access

40
One-piece bench seat
Bench seat with fixed one-piece cushion and
folding one-piece backrest.
Folding the backrest
F Move the front seats for ward if necessary.
F
P
osition the outer seat belts on the backrest
and buckle them.
F

L
ower the head restraints to the lowest
position. F

R
elease the seat backrest 2 by pressing
controls 1 simultaneously.
F
F
old the seat backrest 2 on to the fixed
cushion.
Raising the seat backrest
F Raise the seat backrest 2 .
F L atch the backrest in place, the red
indicators on each control 1
are no longer
visible.
F

U
nbuckle and return the outer seat belts to
their normal positions ready for use.
2/3-1/3 split rear bench
seat
Bench seat with fixed one-piece cushion and
split backrest (left-hand 2/3, right-hand 1/3)
which can be folded individually to adapt the
load space in the boot.
Folding the backrest
F Move the corresponding front seat for wards
if necessary. F

P
osition the corresponding outer seat belt
against the backrest and buckle it.
F
F
ully lower or remove the head restraint.
F
R
elease the backrest by pressing control
1 of backrest 2
.
F
F
old the backrest 2 on to the fixed cushion.
The rear cushion is not removable.
Ease of use and comfort

64
Advice
The driver must ensure that passengers
use the seat belts correctly and that they
are all fastened before setting off.
Wherever you are seated in the vehicle,
always fasten your seat belt, even for
short journeys.
Do not interchange the seat belt buckles
as they will not fulfil their role fully.
The seat belts are fitted with an inertia
reel permitting automatic adjustment of
the length of the strap to your size. The
seat belt is stowed automatically when not
in use.
The inertia reels have an automatic
locking device at the time of a collision,
during sudden braking or if the vehicle
turns over. You can release the device by
pulling the strap firmly and then releasing
it so that it reels in slightly.
Before and after use, ensure that the seat
belt is reeled in correctly.
After folding or moving a
seat or rear
bench seat, ensure that the seat belt is
positioned and reeled in correctly. Installation
The lower part of the strap must be
positioned as low as possible on the
pelvis.
The upper part must be positioned in the
hollow of the shoulder.
In order to be effective, a seat belt must:
-

b
e tightened as close to the body as
possible,
-

b
e pulled in front of you with a smooth
movement, checking that it does not
twist,
-

b
e used to restrain only one person,
-

n
ot show any signs of cuts or fraying,
-

n
ot be converted or modified to avoid
affecting its performance.
Recommendations for children
Use a
suitable child seat if the passenger
is less than 12
years old or shorter than
one and a
half metres.
Never use the same seat belt to secure
more than one child.
Never allow a
child to travel on your lap.
For more information on Child seats , refer
to the corresponding section. Maintenance
In accordance with current safety
regulations, for all repairs on your
vehicle's seat belts, go to a
qualified
workshop with the skills and equipment
needed, which a
PEUGEOT dealer is able
to provide.
Have your seat belts checked regularly
by a
PEUGEOT dealer or a qualified
workshop, particularly if the straps show
signs of damage.
Clean the seat belt straps with soapy
water or a
textile cleaning product, sold by
PEUGEOT dealers.
In the event of an impact
Depending on the nature and
seriousness of the impact , the
pyrotechnic pretensioner may be deployed
before and independently of the airbags.
Deployment of the pretensioners is
accompanied by a
slight discharge of
harmless smoke and a
noise, due to the
activation of the pyrotechnic cartridge
incorporated in the system.
In all cases, the airbag warning lamp
comes on.
Following an impact, have the seat
belts system checked and, if necessary,
replaced, by a
PEUGEOT dealer or
a


qualified workshop.
Safety

136
Fuse N°Rating Functions
F01 40
AHeated rear screen.
F02 10


AHeated door mirrors.
F03 30
AFront one-touch
windows.
F05 30
ARear one-touch
windows.
F06 10


AFolding door mirrors.
F07 10


AFolding door mirrors.
F09 15


AHeated front seats.
F10 20
AHi-Fi amplifier.Engine compartment
The fusebox is placed in the engine
compartment near the battery.
Access to the fuses
F Unclip the cover.
F
C hange the fuse.
F

A
fter the operation, close the cover very
carefully to ensure correct sealing of the
fusebox.
Right-hand side
In the event of a breakdown