2018 Peugeot 208 bluetooth

6
Connecting Apple® players
Connect the Apple® player to the USB socket
using a
suitable cable (not supplied).
Play starts automatically.
Management of the device is via the audio
system controls.
The classifications available are those of the
portable device connected (artists/albums/
genres/playlists/audiobooks/podcasts).
The version of software in the audio system
may not be compatible with the generation of
your Apple
® p l aye r.
Telephone
Pairing a Bluetooth®
telephone
As a safety measure and because it
r equires sustained attention by the driver,
the pairing of a
Bluetooth mobile telephone
with the Bluetooth hands-free system of
your audio system must be done with the
vehicle stationary and the ignition on.
Visit www.peugeot.co.uk for more information
(compatibility, additional help, etc.).
Activate the telephone's Bluetooth function and
ensure that it is set as visible to all (refer to the
telephone user guide).
Press the MENU button.
Select " Bluetooth ".
Select " Search".
A window is displayed with " Searching for
device ". The services available depend on
the network, the SIM card and the
compatibility of the Bluetooth devices
used.
Check the user guide for your telephone
and with your ser vice provider for the
ser vices to which you have access.
In the list, select the telephone to
pair.
Confirm with " OK".
Only one telephone can be paired at a time.
In some cases, the Bluetooth address of the telephone
may appear instead of the name of the telephone.
A virtual keypad is displayed on the
screen: choose a
4-digit code.
Confirm with " OK".
A message is displayed on the screen of the
telephone: enter the same code and confirm.
If pairing fails, the number of attempts is not
restricted.
A message appears on the screen to confirm
that the connection is successful. Pairing can also be initiated from the
telephone by searching for the Bluetooth
devices detected.
Bluetooth® audio system

7
The directory and the call list can
be accessed after the necessary
synchronisation period (if the telephone is
compatible).
Automatic connection must be configured
in the telephone to allow the connection
each time the vehicle is started.
Managing connections
Press the MENU button.
Select " Bluetooth ".
Select " BT management "/ "Manage
connections " and confirm. The list
of paired telephones is displayed.
Indicates connection of the audio
profile.
Indicates the hands-free telephone
profile.
In the list, select a
telephone to pair.
Confirm with " OK". "
Delete " to delete the pairing.
It is not possible to pair more than 5 telephones,
P ress MENU and select " Bluetooth". Select
" BT management "/ "Manage connections ".
If 5
telephones are already paired, select the
telephone to delete by pressing " OK" and
selecting " Delete" (refer to the "Managing
connections" section).
Making a call
From the directory
Press the MENU button.
Select "Telephone ".
Select "Call ".
Select "Directory ". Select the desired number.
Confirm with
"OK " to start the call.
Making a call
Recently called numbers
(Depending on the compatibility of the phone)
Press and hold SRC/TEL to display
the calls list.
For access to the call list, it is also
possible to press MENU , select
" Telephone ", then select " Call" and finally
select " Calls list ".
In the list of calls, select from:
" Missed calls ", "Dialled calls " or
" Answered calls ".
Confirm with " OK".
Press one of these buttons to go to
the previous or next page in the list.
Select or deselect:
-

"
Te l . ": hands-free connection
-

"
Audio ": play audio files
" OK " to confirm the choice.
Scroll through the calls list.
.
Bluetooth® audio system

8
"OK " starts the call.
The calls list includes calls sent and
received in the vehicle using the
connected telephone.
It is possible to make a
call directly from
the telephone; park the vehicle first as
a

safety measure.
Receiving a call
An incoming call is announced by a ring and
a superimposed display in the screen.
Press SRC/TEL .
or select "YES" to accept the call,
or select "NO" to reject the call.
Pressing and holding the back
button,
or SRC/TEL also rejects an incoming
call.
Managing calls
Hang up
In the contextual menu, select
" Hang up " to end the call.
Pressing and holding SRC/TEL also
ends the call.
Secret – Mute
(so that the caller cannot hear)
In the contextual menu:
Select "Micro OFF " to switch off the
microphone.
Select " Micro OFF " to switch the
microphone on again.
Combined mode
(to leave the vehicle without ending the call)
In the contextual menu:
Select "Combined mode " to
transfer the call to the telephone.
Select " Combined mode " to
transfer the call to the vehicle. In some cases, the combined mode has to
be activated from the telephone.
The Bluetooth connection will be restored
automatically if the ignition has been
switched off, then on again (depending on
the compatibility of the telephone).
Audio settings
Press ¯ to display the audio
settings menu.
Press ¯ to go to the next setting.
The settings available are:
-

A

MBIENCE, BASS, TREBLE and
LOUDNESS.
-

B

ALANCE (left /right balance), FADER
(front/rear balance)
-
S

OUND DIST. (driver or passenger).
-
A

UTO VOLUME.
The distribution, or spatialisation of sound,
is an audio process which allows the
sound quality to be improved according to
the setting chosen, corresponding to the
position of the listeners in the vehicle.
The AMBIENCE, TREBLE and BASS
audio settings are different and
independent for each sound source.
Bluetooth® audio system

9
Configuration
Display and language settings
Press the MENU button.
Select " Config. ".
Select " Display " to activate or
deactivate scrolling text.
Select " Language " to modify the
display language.
Select " Version " for information on
the software.
Select " System " when you want to
install an update. Information can be
obtained from a
PEUGEOT dealer.
Select " Unit" to modify the units for
temperature (Celsius, Fahrenheit).
Frequently asked questions
The following information groups together the
answers to the most frequently asked questions
concerning your audio system.
.
Bluetooth® audio system

10
QUESTIONRESPONSESOLUTION
There is a difference in sound quality between
the different audio sources (radio, CD, etc.). For optimum sound quality, the audio settings
(volume, bass, treble, ambience, loudness)
can be adapted to the different sound sources,
which may result in audible differences when
changing source (radio, CD, etc.).Check that the audio settings (volume, bass,
treble, ambience, loudness) are adapted to
the sources being listened to. It is advisable to
set the AUDIO functions (bass, treble, front-
rear balance, left-right balance) to the middle
position, select the musical ambience and set
the loudness correction to the "Active" position
in CD mode or to the "Inactive" position in radio
mode.
When changing the settings for treble and bass,
the ambience setting is deselected.
When changing the ambience setting, treble
and bass are reset to zero. Choosing an ambience imposes settings for
treble and bass. Modifying one without the other
is only possible with a


personalised ambienceModify the treble and bass settings or the
ambience setting to obtain the desired sound
quality.
When changing the balance setting, distribution
is deselected. Choosing the "driver" distribution setting
imposes a


balance setting.Modify the balance or distribution settings to
obtain the desired sound quality.
The reception quality of the tuned radio station
gradually deteriorates or the stored stations are
not working (no sound, 87.5
MHz is displayed,
e t c .) . The vehicle is too far from the transmitter of
the station or no transmitter is present in the
geographical area.
Activate the RDS function to enable the system
to check whether there is a
more power ful
transmitter in the geographical area.
The surroundings (hills, buildings, tunnels,
underground parking, etc.) are blocking
reception, including in RDS tracking mode. This phenomenon is normal and does not
indicate a
failure of the audio equipment.
The aerial is missing or has been damaged (for
example when going through a
car wash or into
an underground car park). Have the aerial checked by a
PEUGEOT dealer.
Bluetooth® audio system

11
Sound cut-outs of 1 to 2 seconds in radio mode. During this brief sound cut-out, the RDS
searches for any frequency permitting better
reception of the station. Deactivate the RDS function if the phenomenon
is too frequent and always on the same route.
Traffic announcement TA is displayed. I do not
receive any traffic information. The radio station does not broadcast traffic
information.Tune to a
radio station which broadcasts traffic
information.
The stored stations are not found (no sound,
87.5
MHz is displayed, etc.). An incorrect waveband is selected.
Press the SRC/ TEL button to return to the
waveband (FM1
or FM2) on which the stations
are stored.
The CD is ejected every time or is not played. The CD is upside down, cannot be read, does not contain audio files or contains audio files
of a
format that cannot be played by the audio
system.
The CD is protected by an anti-pirating system
not recognised by the audio system. -

C
heck that the CD is inserted in the player
the right way up.
-

C
heck the condition of the CD: the CD
cannot be played if it is too badly damaged.
-

C
heck the content in the case of a recorded
CD: consult the advice in the "Media"
section.
-

T
he audio system's CD player does not play
DVDs.
-

B
ecause of low quality, certain burned CDs
will not be read by the audio system.
The CD sound is of poor quality. The CD used is scratched or of poor quality. Insert good quality CDs and store them in
suitable conditions.
The audio settings (bass, treble, ambiences) are
unsuitable. Return bass and treble settings to 0, without
selecting an ambience.
The Bluetooth connection is cut. The battery of the peripheral device may not be
sufficiently charged.Charge the battery of the peripheral device.
.
Bluetooth® audio system

12
The "USB peripheral error" or "Peripheral not
recognised" message appears on the screen.The USB memory stick is not recognised. Use only USB memory sticks formatted to FAT
32 (28 -bit file allocation table).
A telephone connects automatically,
disconnecting another telephone. Automatic connection overrides manual
connection.Modify the telephone settings to remove
automatic connection.
The iPod is not recognised when connecting to
the USB port. The iPod is of a
generation that is not
compatible with the USB.
The hard disk or device is not recognised when
connecting to the USB socket. Some hard disks and devices need a
power
supply greater than is provided by the audio
system. Connect the device to the 230
V socket, the
12
V socket or an external power supply.
Caution : ensure that the device does not
transmit a
voltage greater than 5 V (risk of
destruction of the system).
When streaming, the sound cuts out
m o m e nt a r i l y. Some telephones prioritise connection of the
"hands-free" profile.Delete the "hands-free" connection profile to
improve streaming.
In "Random all" play, not all of the tracks are
played. In "Random all" play, the system can only take
into account up to 999
tracks.
With the engine off, the audio system switches
off after a
few minutes of use. When the engine is switched off, the audio
system operating time depends on the battery
charge.
The switch-off is normal: the audio system
switches to economy mode and switches off to
prevent discharging the vehicle's battery. Start the vehicle's engine to increase the battery
charge.
The message "the audio system is overheated"
appears on the display. In order to protect the installation if the
surrounding temperature is too high, the audio
system switches to an automatic thermal
protection mode leading to a
reduction of the
volume or stopping of the playing of the CD. Switch the audio system off for a
few minutes to
allow the system to cool.
Bluetooth® audio system

1
PEUGEOT Connect Radio
Multimedia audio system –
Applications – Bluetooth®
telephone
Contents
First steps

2
S

teering mounted controls
3
M

enus
4
A

pplications
5
R

adio
6
D

AB (Digital Audio Broadcasting) radio
8
M

edia
9
T

elephone
1
0
Settings

1
6
Frequently asked questions

1
8The different functions and settings
described vary according to the version
and configuration of your vehicle.
As a
safety measure and because it
requires sustained attention by the
driver, the pairing of a Bluetooth mobile
telephone with the Bluetooth hands-free
system of your audio system must be
done with the vehicle stationary and the
ignition on.
The system is protected in such a way that
it will only operate in your vehicle.
The display of the message Energy
Economy Mode signals that a change to
standby is imminent.
The link below gives access to OSS (Open
Source Software) codes for the system.
https://www.groupe-psa.com/fr/oss/
https://www.groupe-psa.com/en/oss/
.
PEUGEOT Connect Radio