2018 NISSAN ALTIMA check engine

[x] Cancel search: check engine

Page 389 of 467

NISSAN ALTIMA 2018  Owner´s Manual 1. Crankshaf t pulley
2. Drive belt automatic tensioner pul-ley
3. Generator pulley
4. Air compressor pulley
WARNING
Be sure the ignition switch is placed in
the OFF or LOCK position before servic-
in

Page 394 of 467

NISSAN ALTIMA 2018  Owner´s Manual ENGINE COMPARTMENT
WARNING
Never use a fuse of a higher or lower
amperage rating than that specified on
the fuse box cover. This could damage
the electrical system or electronic con-
trol units or cau

Page 418 of 467

NISSAN ALTIMA 2018  Owner´s Manual Some day-to-day and regular mainte-
nance is essential to maintain your vehicle
good mechanical condition, as well as its
emissions and engine performance.
It is the owner’s responsibility to make s

Page 420 of 467

NISSAN ALTIMA 2018  Owner´s Manual Seats:Check seat position controls such
as seat adjusters, seatback recliner, etc., to
ensure they operate smoothly and all
latches lock securely in every position.
Check that the head restraints/head

Page 421 of 467

NISSAN ALTIMA 2018  Owner´s Manual fuel fumes are evident, check for the cause
and have it corrected immediately.
Power steering fluid level* and lines:
Check the level when the fluid is cold, with
the engine off. Check the lines for p

Page 422 of 467

NISSAN ALTIMA 2018  Owner´s Manual Engine coolant*:Replace coolant at the
specified interval. When adding or replac-
ing coolant, be sure to use only Genuine
NISSAN Long Life Antifreeze/Coolant (blue)
or equivalent with the proper mixt

Page 437 of 467

NISSAN ALTIMA 2018  Owner´s Manual Fuel containing MMT
MMT, or methylcyclopentadienyl manga-
nese tricarbonyl, is an octane boosting ad-
ditive. NISSAN does not recommend the
use of fuel containing MMT. Such fuel may
adversely affect v

Page 452 of 467

NISSAN ALTIMA 2018  Owner´s Manual Due to legal requirements in some states
and Canadian Provinces, your vehicle may
be required to be in what is called the
“ready condition” for an
Inspection/Maintenance (I/M) test of the
emission