2018 MITSUBISHI OUTLANDER height

Instruments and controls1-1
1
Overview
N00100202788
Instruments and controls
Combination headlights an
d dimmer switch P.5-207
Automatic high beam system switch (if so equipped) P.5-211Turn signal lever P.5-217 Front fog light switc
h (if so equipped)
P.5-218
Steering wheel remote control switches[Refer to the separate owner’s manual.]
Active stability control (ASC) OFF switch P.5-101
Supplemental restraint system (SRS) - airbag (for driver’s seat) P.4-35, 4-42Horn switch P.5-227
Instrument clusterP.5-154
Windshield wiper and washer switch P.5-219Rear window wiper and washer switch P.5-223
Cruise control switches P.5-103, 5-107
Steering wheel height and reach adjustment lever P.5-57
Engine switch (if so equipped) P.5-18
Driver’s ventsP. 7 - 2
Sportronic steering wheel paddle shifter (if so equipped) P.5-72, 5-80
Driver’s vents P.7-2
Multi information display switch (if so equipped)
Headlight leveling switch (if so equipped) P.5-216
Driver’s side power liftgate switch (if so equipped) P.5-41Fuse box P.9-26
Lane Departure Warning (LDW) switch (if so equipped)Forward Collision Mitigation system (FCM) ON/OFF switch (if so equipped)P.5-122
Supplemental restraint system (SRS) - front knee airbag (for driver’s seat) P.4-35, 4-42
Ignition switch (if so equipped) P.5-63
Camera switch (if so equipped) P. 5-144
BK0249100US.book 1 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Seats4-2 Seat and restraint systems
4
N00408401607
To adjust the seat forward or backward  Page 4-5
To adjust the seatback
 Page 4-6
To adjust the seat height (Driver’s seatonly)
 Page 4-6
Heated seat (if so equipped)
 Page 4-8
To adjust the seat forward or backward(vehicles with second
row seat slide func-
tion)
 Page 4-8
To adjust the seatback
 Page 4-8
Arm rest
 Page 4-10
Accessing the third row seat (Seating 7passengers)
 Page 4-10
To adjust the seatback
 Page 4-10
Seats 1 - Front seat 2 - Second row seats
3 - Third row seat (Seating 7 passengers)
BK0249100US.book 2 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Front seats4-6 Seat and restraint systems
4
N00402001379
To adjust the seatback, lean forward slightly,gently pull the seatback lock lever up, thenlean backward to a comfortable position andrelease the lever. The seatback will lock inplace.
Operate the switch in the direction of thearrows to adjust the seatback.
N00402101253
Operate the lever repeatedly to raise or lowerthe seat.
To adjust the seatbacks Manual seat adjustment
CAUTIONThe reclining mechanism used in the seat-back is spring loaded, and will cause theseatback to return quickly to the verticalposition when the lock lever is operated.When pulling the lever, sit close to the seat-back or hold the seatback with your hand tocontrol its return motion.
Power seat adjustment 1- Move forward2- Move backward
NOTE
To prevent the battery from completely dis-charging, operate the
power seat with the
engine running.
WA R N I N GTo reduce the risk of serious injury ordeath in the event of
an accident or sud-
den stop, all seatbacks should be kept inthe upright position while the vehicle is inmotion.Seat belt performance during an accidentcan be adversely affect
ed if the seatbacks
are reclined. The more a seatback isreclined, the more likely seat belt perfor-mance will be adversely affected. If theseat belt is not proper
ly positioned against
the body during an accident, there isincreased risk you will slide under the beltand receive serious
injury or death.
To adjust the seat height (Driver’s seat only) Manual seat adjustment
BK0249100US.book 6 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Second row seats4-8 Seat and restraint systems
4
N00435601463
The heated seats can
be operated by pushing
the switch when the ignition switch or theoperation mode is in ON. The indicator light(A) will illuminate while the heater is on.
N00402501231
When sitting in the mi
ddle seating position of
the second row seat, adjust the head restraintsto an appropriate height where they lock inposition. Refer to “Hea
d restraints” on page
4-11. Pull the seat adjusting lever up and slide theseat forward or backward to the desired posi-tion. Release the adjusting lever to lock theseat in place.
Heated seat (if so equipped) 1 (HI) - Heater high (for quick heat-
ing)
2 (neutralposition)
- Heater off
Type 1Type 2
3 (LO) - Heater low (to keep the seat
warm)
WA R N I N GPersons who are unable to feel tempera-ture change or skin
pain due to age, ill-
ness, injury, medication, alcohol use,fatigue or other phys
ical conditions or
who have sensitive sk
in may suffer burns
when using the heated seat even at lowtemperatures. To reduce the risk of burns,people with such conditions must use carewhen using the heated seat.CAUTIONSwitch off the heated seats when not in use.Operate the heaters at the “HI” position forquick heating. After the seat has becomewarm, set the heater switch to the “LO” posi-tion to keep it warm. Sl
ight variations in the
seat temperature may be felt while using theheated seats. This is caused by the operationof the heater’s internal thermostat and doesnot indicate a malfunction.Do not place heavy obj
ects on the seat or
stick pins, needles, or
other pointed objects
into the seat.Do not place a blanket,
cushion, or other
insulating material on the seat while usingthe heater; doing so can
cause the heater ele-
ment to overheat.
When cleaning the seat, do not use benzine,kerosene, gasoline, alc
ohol, or other organic
solvents; doing so can cause damage notonly to the surface of the seat, but also to theheater.If water or any other li
quid is spilled on the
seat, allow it to dry thoroughly beforeattempting to use the heater. Turn the heateroff immediately if it
appears to be malfunc-
tioning during use.
Second row seats To adjust the seat forward or backward (vehicles with sec-ond row seat slide function)
CAUTION
BK0249100US.book 8 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Third row seat (Seating 7 passengers)4-10 Seat and restraint systems
4
N00403001318
To use the armrest, tilt the arm rest down foruse as shown.The arm rest includes a cup holder.
N00400101031
For third row seat passenger entry or exit, thesecond row seats can be moved forward.Pull up the lever (A) and tilt the seatback for-ward. Then slide the entire seat forward.
To return the seat, slide the entire seat back-ward to the desired pos
ition and then raise the
seatback until it locks securely.After returning the seat, gently try to move itforward and backward to check that it issecurely retained and adjust the seatback tothe normal seating position.
N00419501073
Pull up the strap and ad
just the seatback by
hand to the desired position, and release thestrap.
Arm rest
NOTE
Never sit on an arm rest.Doing so could damage the arm rest.
Accessing the third row seat (Walk-in function, Seating 7 passengers)
WA R N I N GTo make sure that the seat is securelylocked, try to move it forward or back-ward without using the lever. To reducethe risk of serious in
jury or death in the
event of an accident
or sudden stop, all
seatbacks should be kept in the uprightposition while the ve
hicle is in motion.
Third row seat (Seating 7 passengers)
WA R N I N GThe third row seats are intended for useby no more than two belted occupants,each of which does not exceed 160 cm (63inches) in height.Exceeding these limitations can result inan increased risk of
personal injury or
death in the event
of an accident.
To adjust the seatback
BK0249100US.book 10 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Head restraints
Seat and restraint systems 4-11
4
N00404301594
Head restraints can reduce the risk of a whip-lash injury if your vehicle is hit from the rear.The head restraints are equipped in the illus-trated position.To maximize the effectiveness of the headrestraints, adjust the seatback to the uprightposition, and the head
restraint to the proper
position. Sit back against the seatback withyour head close to the head restraint.Head restraints *: Seating 7 passengers
WA R N I N GDriving without the
head restraints in
place can cause you and your passengersserious injury or deat
h in an accident. To
reduce the risk of in
jury in an accident,
always make sure the head restraints areinstalled and proper
ly positioned when
the seat is occupied.In order to minimize
the risk of a neck
injury due to a rear impact, the seatbackmust be adjusted to the upright positionand the head restraint
must be adjusted to
the proper position
before vehicle opera-
tion. The driver shou
ld never adjust the
seat while the vehicle is in motion.Never place a cushion
or similar device on
the seatback. This can adversely affecthead restraint performance by increasingthe distance betwee
n your head and the
restraint.
When a person sits in the second centerseating position, pull up
the head restraint
to a height at which it locks in position. Besure to make this adjustment before start-ing to drive. Serious injuries could other-wise be suffered in the result of an impact.NOTE
The head restraint height in the second rowoutboard seats and the third row seats cannotbe adjusted.WA R N I N G
BK0249100US.book 11 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Head restraints4-12 Seat and restraint systems
4
To reduce the risk of injury in an accident,adjust the head restraint height so that thecenter of the restrain
t is at your ear level
when seated. Any person too tall for therestraint to reach their ear level when seatedshould raise the restraint to the highest lockedposition.To raise the restraint, pull it straight up.To lower the restraint, push down on itwhile pressing the lock knob (A) in thedirection shown by the arrow.After adjusting the height, push down onthe restraint to make sure it is locked inposition.
Press the lock knob (A) in the directionshown by the arrows. Then pull the headrestraint up and out of the seatback.First check that the head restraint is facing inthe right direction as shown in the previousillustration, and then insert it into the seat-back. Push the head restraint down while
pressing the lock knob (A) until the restraintlocks into place.
Adjustment of the head restraint height (front seats)
To remove
WA R N I N GTo help minimize the risk of neck injury inthe event of an accident, the headrestraints must be properly installed andpositioned to proper height before vehicleoperation.
To install
CAUTIONCheck that the lock knob (A) is extended outas shown in the illustration. Then pull thehead restraint up to make sure that it islocked in place and will
not come out of the
seatback.CAUTIONThe shape and size of the head restraint dif-fers according to the seat. Always use thecorrect head restraint provided for the seatand do not install the he
ad restraint in the
wrong direction.
BK0249100US.book 12 ページ ２０１７年５月１０日　水曜日　午前８時４９分

Seat belts4-24 Seat and restraint systems
4
N00406301354
The seat belt shoulder
anchor height can be
adjusted. To move the anchor down, press thelock knob (A) and slide the anchor down tothe desired position. To move the anchor up,slide the anchor up to the desired position.
N00406501112
When seat belts for the second row outboardseating position and for the third row are notused, the seat belts can be stored.
WA R N I N GWhen a child booster se
at is used on the
front passenger seat, the front passengerseat belt warning ligh
t will not come on, if
the seat belt is not fastened when thebooster seat is used
. Confirm that the
child is wearing the
seat belt properly.
Do not install any acce
ssory or sticker that
makes the light difficult to see.
Adjustable seat belt shoulder anchor (front seats) Anchor down Anchor up
WA R N I N GAlways adjust the shou
lder belt anchor so
that the shoulder belt
is positioned across
the center of your shoulder without touch-ing your neck. The sh
oulder belt should
not be able to fall off your shoulder. Fail-ure to follow this instruction can adverselyaffect seat belt performance and increasethe risk of serious in
jury or death in the
event of an accident.Adjust the shoulder be
lt anchor only when
the vehicle is not in motion.Make sure the anchor is securely locked inposition after adjusting it.
Storing the second row (out-board seating positions) and third row seat belts
BK0249100US.book 24 ページ ２０１７年５月１０日　水曜日　午前８時４９分