2018 MITSUBISHI L200 display

NOTElIn extreme cold, the air conditioning control
panel screen may operate sluggishly. This does not indicate a problem.
It will disappear when the vehicle interior temperature rises to a normal temperature.Blower speed selection switch
E00702801456
Press of the blower speed selection
switch to increase the blower speed.
Press
of the blower speed selection
switch to decrease the blower speed.
The selected blower speed will be shown in
the display (A).
1- Increase
2- DecreaseTemperature control switch
E00703001859
Press or of the temperature control
switch to the desired temperature.
The selected temperature will be shown in
the display (A).

NOTEl The temperature value of air conditioner is
switched in conjunction with outside tem-
perature display unit of the multi informa- tion display.
Refer to “Changing the temperature unit” on
page 5-10.NOTEl While the engine coolant temperature is low,
the temperature of the air from the heaterwill be cool/cold until the engine warms up, even if you have selected warm air with the
switch.
To prevent the windscreen and windows from fogging up, the ventilator mode will be
changed to “
” and the blower speed will
be reduced while the system is operating in the AUTO mode.
l When the temperature is set to the highest or
the lowest, the air selection and the air con-
ditioner will be automatically changed as follows.
Also, if the air selection is operated manual-
ly after an automatic changeover, manual operation will be selected.
• Quick Heating (When the temperature is
set to the highest setting)
Outside air will be introduced and the air conditioner will stop.
• Quick Cooling (When the temperature is
set to the lowest setting)
Inside air will be recirculated and the air
conditioner will operate.
The settings described above are the factory
settings.
The air selection and air conditioning
switches can be customised (function setting changed), and the automatic switching of out-side air and the air conditioner according to
operating conditions can be changed as de-
sired.
Automatic climate control air conditioner*
7-11OKTE18E1For pleasant driving7 Type 1
Type 2

For further information, we recommend youto consult a MITSUBISHI MOTORS Au-
thorized Service Point.
Refer to “Customizing the air conditioning
switch” on page 7-14.
Refer to “Customizing the air selection” on page 7-13.
Synchronized mode and dual mode*
The driver’s side and the passenger’s side
temperature can be controlled independently.
At this time, the “DUAL” indicator will be
shown in the display (A).
l Synchronized mode
If the driver’s side temperature control switch is pressed, the passenger’s side temperature will also be controlled to the
same setting temperature as the driver’s
side.
l Dual mode
If the passenger’s side temperature con-
trol switch is pressed under synchron- ized mode, the system will switch to du-
al mode. In dual mode, the driver’s side
and the passenger’s side temperature can
be set separately by using each tempera- ture control switch.
Press the AUTO switch to return to
synchronized mode.Air selection switch
E00703401967
To change the air selection, simply press the air selection switch.
l Outside air: Indication lamp (A) is OFF
Outside air is introduced into the passen- ger compartment.
l Recirculated air: Indication lamp (A) is
ON
Air is recirculated inside the passenger
compartment.CAUTIONl Use of the recirculation position for exten-
ded time may cause the windows to fog up.NOTEl Normally, use the outside position to keep
the windscreen and side windows clear and
quickly remove fog or frost from the wind- screen.
If high cooling performance is desired, or if
the outside air is dusty or otherwise contami- nated use the recirculation position. Switch
to the outside position periodically to in- crease ventilation so that the windows do notbecome fogged up.
Automatic climate control air conditioner*
7-12OKTE18E1For pleasant driving7

Air conditioning switch
E00703502574
Press the switch to turn the air conditioner
on, the “
” indicator will be shown in the
display (A).
Press the switch again to switch it off.
Customizing the air conditioning switch
E00739700124
Functions can be changed as desired, as sta- ted below.
l Enable automatic air conditioning con-
trol
When the AUTO switch is pressed, or the temperature control switch is set to
the minimum temperature, the air condi- tioning switch is controlled automatical-
ly.

l Disable automatic air conditioning con-
trol
The air conditioning switch is not con-
trolled automatically as long as the air
conditioning switch is not operated.

l Setting change method
Hold down the air conditioning switch
for approximately 10 seconds or more. • When the setting is changed from ena-
ble to disable
3 sounds are emitted and the “
” in-
dicator flashes 3 times.
• When the setting is changed from dis-
able to enable
2 sounds are emitted and the “
” in-
dicator flashes 3 times.
NOTEl The factory setting is “Enable automatic air
conditioning control”.
l When the demister switch is pressed, in or-
der to prevent misting of the windows the air
conditioner operates automatically even if “Disable automatic air conditioning control”
is set.OFF switch
E00702701110
Press the switch to turn off the air condition-
ing system.
Automatic climate control air conditioner*
7-14OKTE18E1For pleasant driving7

MODE switch
E00703301096
Each time the MODE switch is pressed, the
mode changes to the next one in the follow-
ing sequence: “
” → “” → “” →
“
” → “”. The selected mode is
shown in the display (A). (Refer to “Mode
selection” on page 7-03.)
Demister switch
E00703901177
When this switch is pressed, the mode
changes to the “
” mode. The indication
lamp (A) will come on. The selected mode is shown in the display (B). (Refer to “Mode se-
lection” on page 7-03.)
NOTEl When the demister switch is pressed, the air
conditioning system automatically operates and outside air (as opposed to recirculated air) is selected. This automatic switching control is carried out to prevent misting of
the windows even if “Disable automatic air conditioning control” or “Disable automaticair control” is set. (Refer to “Customizing
the air conditioning switch” on page 7-14,
“Customizing the air selection” on page 7-13.)Operating the system in auto-
matic mode
E00704102492
In normal conditions, use the system in the
AUTO mode and follow these procedures: 1. Press the AUTO switch.
2. Set the temperature control switch to the
desired temperature.
The mode selection, blower speed adjust-
ment, recirculated/outside air selection, tem-
perature adjustment, and air conditioner
ON/OFF status are all controlled automatical-
ly.
Automatic climate control air conditioner*
7-15OKTE18E1For pleasant driving7

TypeSize
Maxi-mum
playing time
Comments
CD-
R/RW12 cm—•Disc contain-
ing MP3 files
Discs That May Not Be Played
l Playback of discs other than those de-
scribed in “Types of Disc That Can Be
Played” is not guaranteed.
l 8 cm discs may not be used.
l Do not insert irregularly-shaped discs
(for example, heart-shaped), as these
may result in malfunction. Additionally, discs that have transparent portions may
not be played.
l Discs that have not been finalized cannot
be played.
l Even if recorded using the correct for-
mat on a recorder or computer, applica- tion software settings and environments;
disc peculiarities, damage, or marking; or dirt or condensation on the lens inside
the product may render the disc unplaya- ble.
l Depending on the disc, some functions
may not be used, or the disc may not be
played.
l Do not use discs with cracks or warps.
l If the disc has stickers affixed, remains
from removed stickers, or affixed adhe-
sive, then do not use the disc.
l Discs that have decorative labels or
stickers may not be used.
Nonstandard CDs
This product will play audio CDs, however,
please be aware of the following points re-
garding CD standards.
l Ensure that you use discs with
on the
label surface.
l Playback of other than standard CDs is
not guaranteed. Even if the audio can be played, the audio quality cannot be guar-
anteed.
l When playing other than standard CDs,
the following may occur. • There may be noise during playback.
• There may be jumping in the audio.
• The disc may not be recognized.
• The first track may not be played.
• It may take longer than usual before
start of playback of tracks.
• Playback may start from within the
track.
• Some parts may not be played.
• Tracks may freeze during playback.
• Tracks may be displayed erroneously.Audio Files (MP3/WMA/
AAC) E00736101094
This product can play MP3/WMA/AAC for-mat audio files recorded on CD-ROM, CDR/
RW, and USB devices.

There are limitations on the files and media that can be used, therefore read the following prior to recording MP3/WMA/AAC format
audio files on discs or USB devices.
Additionally, ensure you read the user man- uals for your CD-R/RW drive and the writingsoftware, and ensure these are used correctly.
If the MP3/WMA/AAC format audio files in-
cludes title information or other data, then
this can be displayed.
CAUTIONl Actions such as copying audio CDs or files
and either distributing these to others for free or for charge, or uploading files via the Internet or other means to servers is an in-
fringement of the law.
Audio Files (MP3/WMA/AAC)
7-20OKTE18E1For pleasant driving7

Name
Speci-fica-tion
Explanation
Maxi-
mum file number (total
number on me- dia)CD509 filesMaxi-
mum file number (total
number on me- dia)USB10,000 files
(Up to 100 files can be
stored in one folder.)File name and fold- er namerestric- tionsMaximum 64 bytes (for Uni-
code, 32 characters), files/ fold-
ers with file/ folder names longer
than this will not be displayed or
played.USB sup- ported
formatsThe recommended file system is
FAT32.
1 partition onlyNOTEl The order in which folders and audio files
are displayed on this product may be differ-ent to how they are displayed on a computer.What Is MP3?
E00736401039
MP3 is the abbreviation of “MPEG-1 Audio
Layer 3”. MPEG is an abbreviation of “Mo-tion Picture Experts Group”, and this is a vid-
eo compression standard used in video CDs, etc.
MP3 is one of the audio compression meth-
ods contained in the MPEG audio standard,
and reduces the quality of sounds that are be- yond the auditory resolution of the human ear
and that are hidden by louder sounds, thus
creating high-quality data with a lower data
size.
This can compress CD audio to approximate- ly 1/10 its original data size without percepti-
ble loss, approximately 10 CDs can be writ-
ten to a single CD-R/RW disc.
CAUTIONl MP3 files different to the standards at right
may not be played correctly, or file/folder
names may not be displayed correctly.Standards for MP3 Files That
Can Be Played
Specifications for MP3 files that can be
played are as shown below.
ItemDetailsSpecifica- tionMPEG-1 AUDIO LAYER3MPEG-2 AUDIO LAYER3Sampling
frequency [kHz]MPEG-1: 32/44.1/48MPEG-2: 16/22.05/24Bit rate[kbps]MPEG-1: 32 to 320MPEG-2: 8~180VBR (var- iable bit rate)SupportChannelmodeStereo/ Joint stereo/ Dual chan-
nel/ MonauralFile ex- tensionmp3Supported tag infor- mationID3 tag Ver. 1.0, Ver. 1.1, Ver.
2.2, Ver. 2.3, Ver. 2.4
(ISO-8859-1, UTF-16 (Uni-
code)), Titles, Artist name, Al-
bum name
Audio Files (MP3/WMA/AAC)
7-22OKTE18E1For pleasant driving7

ItemDetailsMaximumnumber of characters that can
be indica- ted on the display64 characters

What Is WMA?
E00736601044
WMA is the abbreviation of Windows MediaAudio, and this is an audio compression for-
mat from Microsoft. This is a compression format that has a higher compression ratio
than MP3.
NOTEl Microsoft, Windows Media, and Windows
are registered trademarks of Microsoft Cor-
poration (USA) and in other countries.CAUTIONl WMA supports digital rights management
(DRM). This product cannot play WMA files protected using this system.
l WMA files different to the standards at right
may not be played correctly, or file/folder
names may not be displayed correctly.CAUTIONl “Pro”, “Lossless”, and “Voice” are not sup-
ported.
Standards for WMA Files That
Can Be Played
Specifications for WMA files that can be
played are as shown below.
ItemDetailsSpecificationWindows Media Audio
Version7.0/8.0/9.0Sampling
frequency [kHz]32/44.1/48Bit rate[kbps]32 to 192VBR (varia-ble bit rate)SupportChannel modeStereo/MonauralFile exten- sionwmaSupported
tag informa- tionWMA tags
Title name, Artist name, Al-
bum nameItemDetailsMaximum number of characters
that can be
indicated on the display64 characters

What is AAC?
E00736801059
AAC is the abbreviation of Advanced Audio
Coding, and this is an audio compression standard used in “MPEG-2” and “MPEG-4”. This features 1.4x the compression of MP3,
with comparable audio quality.
CAUTIONl AAC supports digital rights management
(DRM). This product cannot play AAC files
protected using this system.
l AAC files different to the standards at right
may not be played correctly, or file/folder
names may not be displayed correctly.
Standards for AAC Files That
Can Be Played
Specifications for AAC files that can be played are as shown below.
Audio Files (MP3/WMA/AAC)
7-23OKTE18E1For pleasant driving7

ItemDetailsSpecificationAdvanced Audio Coding
MPEG4/AAC-LC
MPEG2/AAC-LCSampling
frequency [kHz]MPEG48/11.025/12/16/22.05/
24/32/44.1/48MPE G28/11.025/12/16/22.05/
24/32/44.1/48Bit rate [kbps]MPE G416 to 320MPEG216 to 320VBR (variable bit rate)SupportChannel modeStereo/MonauralFile extensionm4aSupported taginformationAAC tags or ID3 tags
Title, Artist name, Album
nameMaximum num-
ber of characters that can be indi-
cated on the dis- play64 charactersImportant Points on Safety
for the Customer E00737001120
This product features a number of pictorial indications as well as points concerning han-
dling so that you can use the product correct-
ly and in a safe manner, as well as prevent in-
jury or damage to yourself, other users, or
property.WARNINGl The driver should not pay close attention
to the display while driving.
This may prevent the driver looking where they are going, and cause an acci-
dent.
l The driver should not perform complica-
ted operations while driving.
Performing complicated operations while driving may prevent the driver looking
where they are going, and cause an acci- dent.
Therefore stop the vehicle in a safe loca- tion before performing such operations.
l Do not use during malfunctions, such as
when no sound is audible.
This may lead to accident, fire, or electric shock.
l Ensure water or other foreign objects do
not enter the product.
This may lead to smoking, fire, electric shock, or malfunction.WARNINGl Do not insert foreign objects into the disc
slot.
This may lead to fire, electric shock, or malfunction.
l In the event of abnormalities occurring
when foreign objects or water enter the
product, resulting in smoke or a strange
smell, immediately stop using the product, and consult a MITSUBISHI MOTORS
Authorized Service Point.
Continuing to use the product may result in accident, fire, or electric shock.
l Do not disassemble or modify the prod-
uct.
This may lead to malfunction, fire, or
electric shock.
l During thunderstorms, do not touch the
antenna or the front panel.
This may lead to electrical shock from lightning.CAUTIONl Do not block ventilation holes or heat sinks
on the product.
Blocking ventilation holes or heat sinks may prevent heat from escaping from within theproduct, leading to fire or malfunction.
Important Points on Safety for the Customer
7-24OKTE18E1For pleasant driving7