2018 MERCEDES-BENZ SL CLASS wheel

Display messages
Possible causes/consequences and P Solutions
Tir e Press. Monito r
Currently Unavaila‐
ble Becaus et he re is interferenc ef ro mas tr on gs ource of radi ow aves, no
signals from th et ir ep ressur es ensor sa re detected. The tire pressur e
monitor is temporarily malfunctioning .X
Drive on .
The tire pressur em onitor restarts automatically as soo nast he
problem has been resolved.
TirePress .S en ‐
sor(s) Missin g There is no signal from th et ir ep ressur es ensor of on eors everal
wheels. The pressur eoft he affecte dt ir ed oes no ta ppear in th em ul-
tifunction display. X
Hav et he fault yt ir ep ressur es ensor replace dataq ualified special -
ist workshop .
Tir eP ressure Moni‐
tor Inoperative No
Wheel Sensor s The wheels mounte ddon ot hav eas uitable tire pressur es ensor .T he
tire pressur em onitor is deactivated.X
Moun tw heels wit hs uitable tire pressur es ensors.
The tire pressur em onitor is activated automatically after drivin gf or
af ew minutes.
Tir e Press. Monito r
Inoperative The tire pressur em onitor is faulty.X
Visit aq ualified specialist workshop .
Vehicle Display messages
Possible causes/consequences and P Solutions
Shift to 'P' or 'N'
to Start Engine You hav ea ttempte dtos ta rt th ee ng in ew it ht he transmission in posi-
tion ^ or [ .X
Shift th et ra nsmission to position ] or \\ .
Apply Brake to
Shift fro m' P' You hav ea ttempte dtos hift th et ra nsmission to position [ , ^ or \\
without depressing th eb rak ep edal .X
Depress th eb rak ep edal .
To Shift out of P
or N, Depres s Brake
and Switch on Engine You hav ea ttempte dtos hift th et ra nsmission out of position ] or \\
int oa nother transmission position wit ht he engin es witched off .X
Depress th eb rak ep edal .X
Start th ee ng ine.
Driver's Doo rO pe n
&T ransmission Not
in PR is kofV ehi‐
cle Rollin gA wa y The driver's door is no tf ully closed and th et ra nsmission is in position
^ , \\ or [ .
Aw arning tone also sounds.
G WARNIN G
The vehicl em ay rol la way.
There is ar is kofana ccident.X
Whe np arking th ev ehicle, shift th et ra nsmission to position ] .198
Display messages
On-boar dc omputer an dd isplays

Safety systems Warning/
indicator
lamp Q Signal type
Possible causes/consequences and P Solutions
'M
Q ' (USA only) or M (Canada only): the red brake system warning lamp is
lit while the engine is running. Aw arning tone also sounds.
G WARNING
There is not enough brake fluid in the brake fluid reservoir.
The braking effect may be impaired.
There is ar isk of an accident.X
Pull over and stop the vehicle safely as soon as possible, paying attention to road
and traffic conditions. Do not continue driving under any circumstances. X
Secure the vehicle against rolling away ( Y
page 131).X
Do not add brake fluid. Adding more will not correct the malfunction. X
Consult aq ualified specialist workshop.X
Observe the additional display messages in the multifunction display.
'
Q USA only: the red brake system warning lamp is lit while the engine is running.
The multifunction display also shows ad isplay message with the & symbol.
The brake pads/linings have reached their wear limit. X
Visit aq ualified specialist workshop.
%
Q The yellow ABS warning lamp is lit while the engine is running.
ABS (anti-lock braking system) is malfunctioning.
If there is an additional warning tone, the EBD (electronic brake force distribution)
is malfunctioning.
Other driving systems and driving safety systems may also malfunction.
G WARNING
The brake system continues to function normally, but without the functions listed
above. The front and rear wheels could therefore lock if you brake hard, for exam-
ple.
The steerability and braking characteristics may be severely affected. The braking
distance in an emergency braking situation can increase.
If ESP ®
is not operational, ESP ®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident. X
Observe the additional display messages in the multifunction display. X
Drive on carefully. X
Visit aq ualified specialist workshop immediately.
If the ABS control unit is faulty, there is also ap ossibility that other systems, such
as the navigation system or the automatic transmission, will not be available.204
Warning and indicator lamps
On-board computer and displays

X
To initiate an emergenc yc al lm anually:
press cover C briefl ytoo pe n.X
Press SOS button D briefly.
The indicator lamp in SOS button D flashes
unti lt he emergency cal lisc oncluded.X
Wait for av oice connectio ntot he Mercedes-
Benz Customer Assistance Center. X
After the emergency call, close cover C .
i If the mobil ep hone network is unavailable,
mbrace will not be able to make the emer-
genc yc all. If yo ul ea ve the vehicl ei mmedi-
ately afte rp ressing the SOS button, yo uw il l
not know whethe rm brace place dt he emer-
genc yc all. In thi sc ase, always summon assis-
tance by othe rm eans.
Breakdow na ssistanc eb utton
X
Press Roadside Assistance button C .
Thi si nitiates ac al ltot he Mercedes-Benz Cus-
tome rA ssistance Center.
The indicator lamp in Roadside Assistance
button C flashe sw hile the cal lisa ctive. The
multifunctio nd is play shows the Connect‐
ing Call message. The audi oo ut pu ti s
muted.
If ac onnectio nc an be made ,t he Cal lC on‐
nected message appears in the multifunction
display.
If am obil ep hone network and GP Sr eception
are available ,t he system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example: R
Current location of the vehicle R
Vehicl ei de ntificatio nn umber
i The display of the multimedia system indi-
cate st ha tac al lisa ctive. During the call, you
can change to the navigatio nm enu by press- ing the NAVI button on COMAND, for exam-
ple.
i Voice outpu ti sn ot available.
Av oice connectio ni se stablished between the
Mercedes-Benz Customer Assistance Center
and the vehicl eo ccupants.
From the remote malfunctio nd iagn osis, the
Mercedes-Benz Customer Assistance Center
can ascertain the nature of the problem
( Y
page 227).
The Mercedes-Benz Customer Assistance Cen-
ter either send saq uali fied Mercedes-Benz tech-
nician or makes arrangements for your vehicle
to be transported to the neares tM ercedes-Benz
Service Center.
Yo um ay be charge df or service ss uc hasr epair
work and/or towing.
Further details are available in your mbrace
manual.
i The system ha sn ot been able to initiate a
Roadside Assistance call, if: R
the indicator lamp for Roadside Assistance
cal lb ut ton C is flashing continuously. R
no voice connectio ntot he Mercedes-Benz
C ustomer Assistance Center wa se stab-
lished.
Thi sc an occu rift he relevant mobil ep hone
network is not available ,f or example.
The Cal lF ailed message appears in the
multifunctio nd is play. X
To en dac all: press the v button on the
multifunctio ns teering wheel.
or X
Press the corresponding multimedia system
button for ending ap hone call.
MB Info cal lb utton226
Features
Sto wag ea nd featur es

X
Press MB Info call button C .
This initiates ac all to the Mercedes-Benz Cus-
tomer Assistance Center.
The indicator lamp in MB Info call button C
flashes while the connection is being made.
The multifunction display shows the Con‐
necting Call message. The audio system is
muted.
If ac onnection can be made, the Call Con‐
nected message appears in the multifunction
display.
If am obile phone networ ka nd GPS reception
are available, the system transfers data to the
Mercedes-Benz Customer Assistance Center,
for example: R
curren tl ocation of the vehicleR
vehicle identification number
i The display of the multimedia system indi-
cates that ac all is active. During the call, you
can change to the navigation menu by press-
ing the NAVI button on COMAND ,f or exam-
ple.
Voice output is not available.
Av oice connection is established between the
Mercedes-Benz Customer Assistance Center
and the vehicle occupants.
You receive information about operating your
vehicle, about the nearest authorized
Mercedes-Benz Center and about other prod-
ucts and services from Mercedes-Benz.
USA only: you can find further information on
the mbrace system under "Owners Online" at
http://www.mbusa.com.
i The system has not been able to initiate an
MB Info call, if: R
the indicator lamp in MB Info call button C
is flashing continuously. R
no voice connection to the Mercedes-Benz
Customer Assistance Center was estab-
lished.
This can occur if the relevant mobile phone
networ kisn ot available, for example.
The Call Failed message appears in the
multifunction display. X
To end ac all: press the v button on the
multifunction steerin gw heel.
or X
Press the corresponding multimedia system
button for ending ap hone call. Call priority When service calls are active, e.g. Roadside
Assistance or MB Info calls, an emergenc yc all
can still be initiated. In this case, an emergency
call will take priority and override all other active
calls.
The indicator lamp of the respective button
flashes until the call is ended.
An emergenc yc all can only be terminated by the
Mercedes-Benz Customer Assistance Center.
All other calls can be ended by pressing: R
the v button on the multifunction steering
wheel R
the corresponding button on the audio sys-
tem or on COMAND for ending at elephone
call
i When ac all is initiated, the audio system is
muted. The mobile phone is no longer con-
nected to COMAND .H owever, if you want to
use your mobile phone, do so only when the
vehicle is stationary and in as afe location.
Vehicle Health Check With the Vehicle Health Check, the Customer
Assistance Center can provide improved sup-
port for problems with your vehicle. During an
existin gc all, vehicle data is transferred to the
Customer Assistance Center. The customer ser-
vice representative can use the received data to
decide what kind of assistanc eisr equired. You
are then ,f or example, guided to the nearest
Mercedes-Benz Servic eC enter or ar ecovery
vehicle is called.
If vehicle data needs to be transferred during an
MB Info call or aR oadside Assistance call, this is
initiated by the Customer Assistance Center.
You will see the Roadside Assistance Con‐
nected message in the COMAND display. If the
vehicle remot em alfunction diagnosis can be
started, the Request for vehicle diagno‐
sis received. Start vehicle diagnosis?
message appears in the display. X
Confirm the message with Yes .X
When the Vehicle diagnosis: Please
start ignition message appears, turn the
SmartKey to position H in the ignition lock
( Y
page 116). X
When the Please follow the instruc‐
tions received by phone and move
your vehicle to as afe position mes-Features 227
Stowage and features Z

lead to increased wear and damage to the
majo ra ssemblies or the vehicle.
Aq ualified specialist workshop, e.g. an author-
ized Mercedes-Ben zC enter, will reset the
ASSYS TP LUS service interval display after the
service work has been carried out. You can also
obtain further information on maintenance
work ,f or example.
Specia ls ervice requirementsThe specified maintenance interval takes only
the normal operation of the vehicle into
account .U nder arduous operating condition so r
increased load on the vehicle, maintenance
work must be carried out more frequently, for
example: R
regular cit yd rivin gw ith frequent intermediate
stops R
if the vehicle is primarily used to travel short
distances R
use in mountainous terrain or on poor road
surfaces R
if the engin eiso ften left idling for long periods
Under these or similar conditions, have, for
example, the air filter, engin eo il and oil filter
replaced or changed more frequently. Under
arduous operating conditions, the tires must be
checked more often. Further information can be
obtained at aq ualified specialist workshop, e.g.
an authorized Mercedes-Ben zC enter.
Driving abroad An extensive Mercedes-Ben zS ervice network is
also available in other countries. You can obtain
further information fro ma ny authorized
Mercedes-Ben zC enter.
Care
Notes on care
H Environmental note
Dispose of empt yp ackaging and cleaning
cloths in an environmentally responsible man-
ner.
! When cleaning your car, do not use: R
dry, coarse or hard cloths R
abrasive cleaning agents R
solvents R
cleaning agent sc ontaining solvents
Do not scrub.
Do not touc ht he surfaces and films with hard
objects, e.g. rings or ice scrapers. Otherwise,
you may scratc hord amage the surfaces and
films.
! Do not park your vehicle for al ong period of
tim ed irectly after cleaning, particularly after
cleaning the wheel rim with wheel cleaner.
Wheel cleaner can lead to the increased cor-
rosio noft he brak ed iscs and pads. Therefore,
drive for af ew minutes after cleaning. By
heatin gupt he brakes, the brak ed iscs and
pads dry. The vehicle can the nbep arked for a
long period of time.
Regular care of your vehicle is ac ondition for
retainin gt he quality in the long term.
Use care products and cleaning agent sr ecom-
mended and approved by Mercedes-Benz.
Washing th ev ehicle and cleaning the
paintwork
Automatic car wash
G WARNING
Braking efficienc yisr educed after washing
the vehicle. There is ar isk of an accident.
After the vehicle has been washed, brake
carefully while paying attention to the traffic
condition su ntil full braking power is restored.
! When DISTRONIC PLUS or the HOL Df unc-
tion is activated, the vehicle brakes automat-
ically in certain situations.
To avoid damage to the vehicle, deactivate
DISTRONIC PLUS and the HOL Df unction in
the followin gors imilar situations: R
when towin gt he vehicle R
in the car wash
! It is preferable to use car washes with
adjustable high-pressure pre-cleaning that
corresponds to the specification for the Cab-
riolet program. In car washes that use high
water pressures, there is ar isk that as mall
amount of water may leak int ot he vehicle.238
Care
Maintenance and care

R
seals R
trim R
ventilation slots
Damaged seals or electrical component sc an
lead to leaks or failures.
! Do not use high-pressure cleaners if the
tank recess is open while you clean it. This
can cause damage to the seals or other com-
ponents.
Cleaning the paintwork
! Do not affix: R
stickers R
films R
magnetic plates or similar items
to painted surfaces. You could otherwise
damage the paintwork.
Scratches, corrosive deposits, areas affected by
corrosion and damage caused by inadequate
care cannot always be completely repaired. In
such cases, visit aq ualified specialist workshop.X
Remove dirt immediately ,w here possible,
while avoiding rubbing too hard. X
Soak insect remains with insect remover and
rinse off the treated areas afterwards. X
Soak bird droppings with water and rinse off
the treated areas afterwards. X
Remove coolant, brake fluid, tree resin, oils,
fuels and greases by rubbing gently with a
cloth soaked in petroleum ether or lighter
fluid. X
Use tar remover to remove tar stains. X
Use silicone remover to remove wax.
If water no longer forms "beads" on the paint
surface, use the paint care products recommen-
ded and approved by Mercedes-Benz .T his is the
case approximately every three to five months,
depending on the climate conditions and the
care product used.
If dirt has penetrated the paint surface or if the
paint has become dull ,t he paint cleaner recom-
mended and approved by Mercedes-Benz
should be used.
Do not use these care products in the sun or on
the hood while the hood is hot. X
Use as uitable touch-up stick, e.g. MB Touch-
Up Stick ,tor epair slight damage to the paint-
work quickly and provisionally. Matt ef inish care
! Never polish the vehicle or the light alloy
wheels. Polishing causes the finish to shine.
! The following can give the paint ag lossy
appearance and thus reduce the matt effect: R
Rubbing hard with unsuitable agents R
Washing the vehicle in direct sunlight
! Never use paint cleaner, buffing or polishing
products, or gloss preserver, e.g. wax, for the
purpose of paintwork care. These products
are only suitable for high-gloss surfaces. Their
use on vehicles with matte paintwork leads to
considerable surface damage or, more spe-
cifically ,tos hiny, spotted areas.
Always have paintwork repairs carried out at a
qualified specialist workshop.
! Only use automatic car washes which cor-
respond to the latest technological stand-
ards. Never use wash programs which finish
by treating the vehicle with hot wax.
Observe these notes if your vehicle has ac lear
matte finish. This will help you to avoid damage
to the paintwork due to incorrect treatment.
These notes also apply to light alloy wheels with
ac lear matte finish.
i Use only insect remover and car shampoo
from the range of recommended and
approved Mercedes-Benz care products.
Cleaning the decorative film
! The following may have an effect on the ser-
vice life and coloring of decorative film: R
sunlight R
temperature, e.g. hot-air fan R
weather conditions R
stone impacts and dirt R
chemical cleaning agents R
greasy substances
! Do not use any types of polish on matt dec-
orative film. Polishing surfaces covered with
film gives it as hiny finish.
! Do not treat matt or structured decorative
film with wax. This may lead to marks that
cannot be removed.240
Care
Maintenance and care

Observe the notes in the section on the care and
treatment of matt paintwork ( Y
page 240);
these notes also apply to decorative film.
To clean, use plenty of water and am ild cleaning
agent without additional or abrasive products,
e.g. ac ar shampoo approved by Mercedes-
Benz. X
Remove bird droppings, tree resin or fuel as
soon as possible.
The decorative film may be irreparably dam-
aged. X
Dry vehicles covered with film using as oft,
absorbent cloth after every wash.
Water marks could otherwise form.
Scratches, corrosive deposits, areas affected by
corrosion and damage caused by inadequate
care cannot always be completely repaired. In
such cases, visit aq ualified specialist workshop.
The cleaning product Paint Cleaner, which has
been approved and recommended by
Mercedes-Benz ,s hould be used when dirt has
penetrated the decorative film surface or the
decorative film has become dull.
The manufacturer can provide you with infor-
mation on special care and cleaning products.
Surfaces covered with film may appea rs hinier
after the decorative film has been removed.
i Have work or repairs on decorative film car-
ried out at aq ualified specialist workshop.
Mercedes-Benz recommends that you use an
authorized Mercedes-Benz Center for this
purpose.
Cleaning the vehicl ep arts
Cleaning the wheels
G WARNING
The water jet from ac ircular jet nozzle (dirt
blasters) can cause invisible exterior damage
to the tires or chassis components. Compo-
nent sd amaged in this way may fail unexpect-
edly .T here is ar isk of an accident.
Do not use power washers with circular jet
nozzles to clean the vehicle. Have damaged
tires or chassis component sr eplaced imme-
diately. ! Do not use acidic wheel cleaning products
to remove brake dust. This could damage
wheel bolts and brake components.
! Do not park your vehicle for al ong period of
time directly after cleaning, particularl ya fter
cleaning the wheel rim with wheel cleaner.
Wheel cleaner can lead to the increased cor-
rosion of the brake discs and pads. Therefore,
drive for af ew minutes after cleaning. By
heating up the brakes, the brake discs and
pads dry. The vehicle can then be parked for a
long period of time.
Cleaning the windows
G WARNING
You could become trapped by the windshield
wipers if they start moving while cleaning the
windshiel dorw iper blades. There is ar isk of
injury.
Alway ss witch off the windshiel dw ipers and
the ignition before cleaning the windshiel do r
wiper blades.
! Do not use dry cloths, abrasive products,
solvents or cleaning agents containing sol-
vents to clean the inside of the windows. Do
not touch the insides of the windows with
hard objects, e.g. an ice scraper or ring. There
is otherwise ar isk of damaging the windows.
! Clea nt he water drainage channels of the
windshiel da nd the rear window at regular
intervals. Deposits such as leaves, petals and
pollen may under certain circumstances pre-
vent water from draining away. This can lead
to corrosion damage and damage to elec-
tronic components. X
Clea nt he inside and outside of the windows
with ad amp cloth and ac leaning product that
is recommended and approved by Mercedes-
Benz.
Cleaning wiper blades
G WARNING
If the windshiel dw ipers are set in motion
while you are cleaning the windshield, you can
be trapped by the wiper arm. There is ar isk of
injury. Care 241
Maintenance and care Z

Transporting the vehicle
Vehicle sw it ha utomatic transmission
! When the vehicl eisl oaded for transport, the
front and rea ra xles must be stationar ya nd on
the same transportatio nv ehicle. Positioning
ove rt he connectio np oi nt of the transport
vehicl eisn ot permitted .T he drive train may
otherwis ebed amaged .
Al lv eh icles
! Yo um ay onl ys ecur et he vehicl ebyt he
wheels ,n ot by parts of the vehicl es uc ha s
axl eors teerin gc omponents. Otherwise, the
vehicl ec ould be damaged.
The towing ey ec an be used to pull the vehicle
onto at railer or transporte rf or transporting pur-
poses. X
Turn the SmartKe ytop osit ion H in the igni-
tio nl oc k.X
Shift the transmission to position \\ .
As soon as the vehicle has been loaded: X
Prevent the vehicl ef ro mr olling away by
applying the electri cp ar kin gb rake.X
Shift the transmission to position ] .X
Turn the SmartKe ytop osit ion