2018 MERCEDES-BENZ SL CLASS door lock

Problems with the windshield wipers Problem
Possible causes/consequences and P Solutions
The windshield wipers
are jammed. Leaves or snow, for example, may be obstructing the windshield wiper
movement .T he wiper motor has been deactivated. X
For safety reasons, you should remove the SmartKey from the igni-
tion lock.
or X
Switch off the engine using the Start/Stop button and open the
driver's door. X
Remove the cause of the obstruction. X
Switch the windshield wipers back on.
The windshield wipers
fail completely. The windshield wiper drive is malfunctioning. X
Select another wiper speed on the combination switch. X
Have the windshield wipers checked at aq ualified specialist work-
shop.
The windshield washer
fluid from the spray noz-
zles no longer hits the
center of the windshield. The spray nozzles are misaligned. X
Have the spray nozzles adjusted at aq ualified specialist workshop.Windshield wipers 103
Lights and windshiel dw ipers Z

As soo na st he ignition is switched on, al lt he
indicator lamps in the instrument cluster light
up .F urther informatio nons it uations where an
indicator lamp either fails to go ou ta fte rs tarting
the engine or lights up whil ed riving
( Y
page 204).
If Start/Stop button C ha sn ot ye tb ee n
pressed, thi sc orrespond stot he key being
remove df rom the ignition.X
To switc hont he power supply: press
Start/Stop button C once.
The powe rs uppl yiss wi tched on. Yo uc an now
activate the windshield wipers, for example.
The powe rs uppl yiss wi tched off agai ni f:R
the driver's door is opene da ndR
yo up ress Start/Stop button C twice when
in thi sp ositionX
To switc hont he ignition: press Start/Stop
button C twice.
The ignition is switched on.
If yo up ress Start/Stop button C once when
in thi sp osit ion, the ignition is switched off
again.
Removing the Start/Sto pb uttonYo uc an remove the Start/Stop button from the
ignition lock and start the vehicl easn ormal
using the SmartKey. X
Remove Start/Stop button C from ignition
lock D .
Yo udon ot have to remove the Start/Stop but-
ton from the ignition lock when yo ul eave the
vehicle. Yo us hould, however, always take the
SmartKe yw it hy ou when leaving the vehicle. As
long as the Sma rtKe y isint h
e vehicle:R
the vehicl ec an be started using the Start/
Stop button R
the electrically powered equipment can be
operated
Starting the engine
Important safety notes
G WARNING
If children ar el ef tu nsupervised in the vehicle,
they could: R
operate the vehicle's equipment. Additionally, children could set the vehicl ei n
motion if, for example, they: R
release the parking brake R
shift the automatic transmission ou tofp ar k
position P R
start the engine
There is ar is kofana ccident and injury.
Never leav ec hildren or animals unattended in
the vehicle.
Whe nl eavi ng the vehicle, always take the
SmartKe yw it hy ou and lock the vehicle. This
also applie stom obil ep hones if the "Digital
Ca rK ey in smartphone "f un ctio ni sa ctivated
via the Mercedes me connect we ba pp .
G WARNING
Combustion engine se mi tp oiso nou se xhaust
gases such as carbo nm onoxide. Inhaling
thes ee xhaus tg as es lead stop oiso ning. There
is ar is koff ata li njury .T herefore neve rl eave
the engine running in enclose ds paces with-
ou ts uf ficient ventilation.
G WARNING
Flammabl em at erial si ntroduced through
environmenta li nfluence or by animals can
ignite if in contact with the exhaus ts ys tem or
parts of the engine tha th ea tu p. There is ar isk
of fire.
Carry ou tr egular checks to make sure that
ther ea re no flammabl ef oreig nm at erial si n
the engine compartment or in the exhaust
system.
During ac ol ds tart, the engine runs at higher
speed stoe nabl et he catalytic converter to
reach its operating temperature .T he sound of
the engine ma yc hange during thi st ime.
Automati ct ransmission X
Depres st he brake peda la nd kee pi t
depressed. X
Shift the transmission to position ] .
Transmission positio nd is play ] is shown in
the multifunctio nd is play.Driving 117
Driving an dp arking Z

i You can star tt he engin eint ra nsmission
position ] and \\ .
Starting procedur ew ith th eS martKeyTo star tt he engin eu sing the SmartKey instead
of KEYLESS-GO, pull the Start/Stop button out
of the ignition lock. X
Turn the SmartKey to position I in the igni-
tion lock ( Y
page 116 )a nd release it as soon
as the engin eisr unning.
Using KEYLESS-GO to start th ee ngineThe Start/Stop button can be used to star tt he
vehicle manually without insertin gt he SmartKey
int ot he ignition lock .T he Start/Stop button
must be inserted in the ignition lock and the
SmartKey must be in the vehicle. This mode for
startin gt he engin eo perates independently of
the ECO start/sto pa utomatic engin es tar tf unc-
tion. X
Depress the brak ep edal and keep it
depressed. X
Press the Start/Stop button once
( Y
page 116).
The engin es tarts.
Pulling away
Genera ln otes
G WARNING
If the engin es peed is above the idling speed
and you engage transmission position D or R ,
the vehicle could pull away suddenly. There is
ar isk of an accident.
When engagin gt ra nsmission position D or R ,
always firmly depres st he brak ep edal and do
not simultaneously accelerate.
! Change gear in good tim ea nd avoid spin-
nin gt he wheels. You could otherwise damage
the vehicle.
Depress the accelerator carefully when pulling
away.
The vehicle lock sc entrally onc ey ou have pulled
away. The locking knobs in the doors drop down.
You can open the doors from the inside at any
time. You can also deactivate the automatic locking
feature ( Y
page 173).
It is only possible to shift the transmission from
position ] to the desired position if you
depres st he brak ep edal. Only the nist he shift
lock released.
i Upshifts tak ep lace at higher engin es peeds
afte rac old start. This helps the catalytic con-
verter to reach its operating temperature
more quickly.
Information on the automatic release of the
electric parking brak e( Y
page 133).
Hill start assist Hill star ta ssist helps you when pulling away
forwar dorinr everse on an uphill gradient. It
holds the vehicle for as hor tt im ea fte ry ou have
removed your foot from the brak ep edal. This
gives you enough tim etom ove your foot from
the brak ep edal to the accelerator pedal and to
depres sitb efor et he vehicle begins to roll.
G WARNING
After as hor tt ime, hill star ta ssist will no lon-
ger brak ey our vehicle and it could roll away.
There is ar isk of an accident and injury.
Therefore, quickly move your foot from the
brak ep edal to the accelerator pedal. Never
leave the vehicle when it is held by hill start
assist.
Hill star ta ssist is not active if: R
you are pulling away on al evel road or on a
downhill gradient R
the transmission is in position \\R
the electric parking brak eisa ppliedR
ESP ®
is malfunctioning
ECO start/stop function
Introduction
The ECO start/sto pf unction switches the
engin eo ff automatically if the vehicle is stopped
under certain conditions.
The engin es tarts automatically when the driver
want stop ull away again. The ECO start/stop
function thereby helps you to reduce the fuel
consumption and emissions of your vehicle.118
Driving
Driving and parking

The current transmission position and drive pro-
gram appear in the multifunction display.
Mercedes-AMG SLC 43
C
Transmission positionD
Drive program
The current transmission position and drive pro-
gram appear in the multifunction display.
Engaging par kp osition P
X
When the vehicle is stationary, depress the
brake pedal. X
Press button C .
Engaging par kp osition Pa utomaticallyPark position ] is automatically engaged if:R
you switch off the engine using the SmartKey
and remove the SmartKey R
you switch off the engine using the SmartKey
or using the Start/Stop button and open the
driver's door or front-passenger door R
you open the driver's door when the vehicle is
stationary or when driving at av ery low speed
and the transmission is in position [ or ^
Under certain conditions, the automatic trans-
mission shifts automatically to transmission
position ] if the HOLD function or Distance
Pilot DISTRONIC is activated. Observe the infor-
mation on the HOLD function ( Y
page 148) and
on Distance Pilot DISTRONIC ( Y
page 144). Engaging reverse gear R
! Only move the automatic transmission to
^ when the vehicle is stationary. X
Depress the brake and keep it pressed. X
Push the selector lever forwards past the first
point of resistance.
The ECO start/sto pf unction is not available
when reverse gear is engaged. Further informa-
tion on the ECO start/sto pf unction
( Y
page 119).
Shifting to neutral N
G WARNING
If children are left unsupervised in the vehicle,
they could: R
operate the vehicle's equipment.
Additionally, children could set the vehicle in
motion if, for example, they: R
release the parking brake R
shift the automatic transmission out of park
position P R
start the engine
There is ar isk of an accident and injury.
Never leave children or animals unattended in
the vehicle.
When leaving the vehicle, alway st ake the
SmartKey with you and lock the vehicle. This
also applies to mobile phones if the "Digital
Car Key in smartphone" function is activated
via the Mercedes me connect web app. X
When the vehicle is stationary, depress the
brake pedal. X
Push the selector lever forwards or back to
the first point of resistance.
If you switch the engine off with the transmis-
sion in position ^ or [ ,t he automatic trans-
mission shifts to \\ automatically.
With the SmartKey: if you then open the driv-
er's door or the front-passenger door or remove
the SmartKey from the ignition, the automatic
transmission shifts to ] automatically.
With KEYLESS-GO: if you then open the driver's
or front-passenger door, the automatic trans-
mission shifts to ] automatically.Automatic transmission 123
Driving and parking Z

If you want the automatic transmission to
remain in neutral \\ ,e .g. when having the vehi-
cle cleaned in an automatic car wash with a
towing system: X
Vehicles with KEYLESS-GO: remove the
Start/Stop button from the ignition lock. X
Insert the SmartKey into the ignition lock. X
All vehicles: switch the ignition on.X
Depress the brake peda la nd keep it
depressed. X
Engage neutral \\ .X
Release the brake pedal. X
Release the electric parking brake. X
Switch off the ignition and leave the SmartKey
in the ignition lock.
Engaging drive positio nDX
When the vehicle is stationary ,d epres st he
brake pedal. X
Push the selector lever back past the first
point of resistance. Transmission positions E Park position
This prevents the vehicle from rolling
awa yw hen stopped.
Only shift the transmission into posi-
tion E ( Y
page 122) when the
vehicle is stationary .T he parking lock
shoul dn ot be used as ab rake when
parking. Alway sa ppl yt he electronic
parking brake in addition to the park-
ing lock in order to secure the vehi-
cle.
If the SmartKey is removed from the
ignition lock, the transmission is
locked.
The automatic transmission shifts to
E automatically: R
when the SmartKey is removed
from the ignition lock R
when the engine is switched off
with the transmission in position
F or : and one of the doors
is opened
In the event of am alfunction of the
vehicle's electronics, the transmis-
sion may lock in position E .H ave
the vehicle electronics checked
immediately at aq ualifie ds pecialist
workshop.
F Reverse gear
Only shift the transmission into posi-
tion F when the vehicle is sta-
tionary.124
Automatic transmission
Driving and parking

X
Press the d or c button to select the
Automatic Door Lock function.
When the Automatic Door Lock function is
activated, the multifunction display shows the
left-hand vehicle door in orange. X
Press the v button to save the setting.
For further information on the automatic locking
feature, see ( Y
page 71).
Activating/deactivating the acoustic
locking verification signal If you switch on the Acoustic Lock function, an
acoustic signal sounds when you lock the vehi-
cle. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Vehicle submenu.X
Press v to confirm.X
Press the d or c button to select the
Acoustic Lock function.
If the Acoustic Lock function is activated,
the 7 symbol in the multifunction display
lights up orange. X
Press the v button to save the setting.
Comfort
Activating/deactivating the EASY-
ENTRY/EXI Tf eature
G WARNING
When the EASY-ENTRY/EXIT feature adjusts
the steerin gw heel, you and other vehicle
occupant s–p articularly children –c ould
become trapped. There is ar isk of injury.
While the EASY-ENTRY/EXIT feature is mak-
ing adjustments, make sure that no one has
any body parts in the sweep of the steering
wheel.
If somebody becomes trapped: R
press one of the memory function position
buttons, or R
move the switch for steerin gw heel adjust-
ment in the opposite direction to that in
which the steerin gw heel is moving.
The adjustmen tp rocess is stopped. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu. X
Press v to confirm. X
Using d or c ,s elect the Easy Entry/
Exit function.
If the Easy Entry/Exit function is activated,
the multifunction display shows the steering
wheel in orange. X
Press the v button to save the setting.
Further information on the EASY-ENTRY/EXIT
feature ( Y
page 89).
Switching the seat belt adjustment on/off X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu. X
Press v to confirm. X
Press the d or c button to select the
Belt Adjustment function.
When the Belt Adjustment function is acti-
vated, the seat belt is displayed in orange in
the multifunction display. X
Press the v button to save the setting.
For further information on belt adjustment, see
( Y
page 42).
Switching the fold-in mirrors when lock-
ing feature on/off This function is only availabl ew hen the vehicle is
equipped with the electrical fold-in function.
This function is only availabl einC anada.
When you activat et he Auto. Mirror Folding
function, the exterior mirrors are folded in when
the vehicle is locked.
If you have switched on the Auto. Mirror
Folding function and you fold in the exterior
mirrors using the button on the door
( Y
page 91), they will not fold out automatically.
The exterior mirrors can then only be folded out
using the button on the door. X
Press the Y or e button on the steering
wheel to select the Sett. menu.X
Press the d or c button to select the
Convenience submenu. X
Press v to confirm.174
Menus and submenus
On-board computer and displays

! Lock the car if you wash it in an automatic
car wash. Otherwise, the vehicle might be
damaged.
! Never clean your vehicle in aT ouchless
Automatic Car Wash as these use special
cleaning agents. These cleaning agents can
damage the paintwork or plastic parts.
If you have your vehicle cleaned in ah igh-
pressure automatic car wash, small amounts
of water may enter the vehicle.
! Make sure that the automatic transmission
is in position N when washing your vehicle in
at ow-through car wash. The vehicle could be
damage dift he transmission is in another
position.
! Make sure that: R
the side windows and the roof are com-
pletely closed R
the climate control blower is switched off R
the windshiel dw iper switch is at position 0
The vehicle could otherwise be damaged.
You can clean the vehicle at an automatic car
wash from the very start.
Preferably clean the vehicle at automatic car
washes that use textile washing elements with-
out brushes. This prevents fine scratches from
forming on the paintwork and film.
If the vehicle is very dirty, pre-wash it before
cleaning it in an automatic car wash.
After using an automatic car wash, wipe off wax
from the windshiel da nd the wiper blades. This
will prevent smears and reduce wiping noises
caused by residue on the windshield.
i Vehicles with decorative film: select aw ash
program without hot wax at the automatic car
wash.
Washing by hand In some countries, washing by hand is only
allowed at speciall ye quipped washing bays.
Observe the legal requirements in each country. X
Do not use hot water and do not wash the
vehicle in direct sunlight. X
Use as oft sponge to clean.X
Use am ild cleaning agent, such as ac ar
shampoo approved by Mercedes-Benz. X
Thoroughly hose down the vehicle with ag en-
tle jet of water. X
Do not point the water jet directly towards the
air inlet or the edges of decorative foils. X
Use plenty of water and rinse out the sponge
frequently. X
Rinse the vehicle with clean water and dry
thoroughly with ac hamois.X
Do not let the cleaning agent dry on the paint-
work or the decorative foils.
Carefully remove all deposits of road salt as
soon as possible when driving in winter.
Powe rw ashers
G WARNING
The water jet from ac ircular jet nozzle (dirt
blasters) can cause invisible exterior damage
to the tires or chassis components. Compo-
nent sd amage dint his way may fail unexpect-
edly .T here is ar isk of an accident.
Do not use power washers with circular jet
nozzles to clean the vehicle. Have damaged
tires or chassis component sr eplaced imme-
diately.
! Vehicles with decorative foil: parts of your
vehicle are covered with decorative foil. Main-
tain ad istance of at least 27.5 in (70 cm)
between the foil-wrappe dp arts of the vehicle
and the nozzle of the high pressure cleaner.
Information abou tt he correct distance is
available from the equipment manufacturer.
Move the power washer nozzle around when
cleaning your vehicle.
The water temperature of the high-pressure
cleaner must not exceed 140 °F (60 °C).
! Alway sm aintain ad istance of at least
11.8 in (30 cm) between the vehicle and the
power washer nozzle. Information abou tt he
correct distance is available from the equip-
ment manufacturer.
Move the power washer nozzle around when
cleaning your vehicle.
Do not aim directly at any of the following: R
tires R
door gaps, roof gaps, joints, etc. R
electrical components R
battery R
plug-type couplings R
lights Care 239
Maintenance and care Z

The bracket sf or the screw-in towing eye are
located in the bumpers. They are at the front and
at the rear, behind the covers. X
Remove the towing eye from the vehicle tool
kit ( Y
page 245).X
Press the mark on cover C inwards in the
direction of the arrow. X
Take cover C off the opening.X
Screw in the towing eye clockwise as far as it
will go and tighten it.
Removing the towing eye X
Unscrew and remove the towing eye. X
Attach cover C to the bumper and press until
it engages. X
Place the towing eye in the vehicle tool kit.
Towing av ehicle with both axles on
the ground
G WARNING
You can no longer steer the vehicle if the
steerin gw heel lock has been engaged. There
is ar isk of an accident.
Always switch off the ignition when towing the
vehicle with at ow cable or at ow bar.
The automatic transmission shifts to position
] automatically when you open the driver's or
front-passenger door or when you remove the
SmartKey from the ignition lock. In order to ensure that the automatic transmis-
sion stays in position \\ when towing away the
vehicle, you must observe the following points: X
Switch on the hazard warning lamps
( Y
page 97). X
Turn the SmartKey to position H in the igni-
tion lock.
On vehicles with KEYLESS-GO, use the Smart-
Key instead of the Start/Stop button
( Y
page 116). X
Depress and hold the brake pedal. X
Shift the transmission to position \\ .X
Release the brake pedal. X
Release the electric parking brake. X
Leave the SmartKey in position H in the igni-
tion lock.
In order to signal ac hange of direction when
towing the vehicle with the hazard warning
lamps switched on, use the combination switch
as usual. In this case, only the indicator lamps
for the direction of travel flash. When you reset
the combination switch, the hazard warning
flashers start flashing again.
It is important that you observe the safety
instructions when towing away your vehicle
( Y
page 256).
Towing the vehicle with the rear axle
raised
! The ignition must be switched off if you are
towing the vehicle with the rear axle raised.
Intervention by ESP ®
could otherwise dam-
age the brake system.
! Vehicles with automatic transmission must
not be towed with the rear axle raised. The
vehicle/trailer combination may otherwise
swerve or even roll over.Towing and tow-starting 257
Breakdown assistance Z