
Theexterior lighting (e xcept parking and stand‐
ing lamps) switch es off automatically when the
driver's door is opened.
RObser vethe no tes on sur round lighting
(→page 147).
Au tomatic driving lights
The pa rking lights, low beam and daytime run‐
ning la mps are switched on automatically
depending on the ignition status, whe ther the
engine is running and on the ambient light.
&
WARNING Risk of accident when the low
beam is switched off in poor visibility
When the light switch is set toÃ, the low
beam may not be switched on automatically
if th ere is fog, snow or other causes of poor
visibility such as spr ay.
#In such cases, turn the light switch to
L.
The automatic driving lights are only an aid. You
are responsible forve hicle lighting. Ac
tivating/deactivating the rear fog light
Re quirements:
RThe light switch is in theL orà posi‐
tion.
#Press theR button.
Please obser vethe count ry-specific la wsonthe
use of rear fog lamps.
Operating the light combination switch
1High-beam headlamps
2Turn signal light, right
3High-beam flasher
4Tu rn signal light, left
144
Light and visibility

Adaptive Highbeam Assist switch es automati‐
cally between:
RLow beam
RHigh beam
At speeds abo ve19 mp h (30 km/h):
RIf no other road users are de tected, high
beam is au tomatical lyswitched on. High beam switches off automatically:
RAt
speeds below 16mp h(2 5 km/h).
RIfot her road users are de tected.
RIfstre et lighting is suf ficient.
At speeds abo veappr ox.31 mp h (50 km/h):
RThe headlamp range of low beam is regulated
automatically based on the dis tance to ot her
ro ad users.
The sy stem's optical sensor is located behind
th e windshield near theove rhead control panel.
Switching Adaptive Highbeam Assist on/off
#To switch on: turnthe light switch to
th eà position.
#Switch on the high beam using the combina‐
tion switch.
When the high beam is switched on automat‐
ically in the dar k,the_ indicator lamp in
th e multifunction display comes on.
#To switch off: switch offthe high beam
using the combination switch.
Switching the daytime running lamps on/off
Multimedia sy stem:
, 9 H K L F O H.÷ / L J K W 6 H W W L Q J V. ' D \
W L P H 5 X Q / L J K W V
#Ac tivate Oor deacti vate ª the function.
Setting the sur round lighting
Re quirement:RThe ignition is switched on.
Multimedia sy stem:
, 9 H K L F O H.÷ / L J K W 6 H W W L Q J V. / R F D
W R U / L J K W L Q J
Exterior switch-off delay time: theex terior
lighting can be activated for a short time af ter
th eve hicle is par ked.
#Set the switch-off delay time.
Locator lighting: if a switch-off delay time is
set, theex terior lighting remains lit up for
40 seconds af terth eve hicle is unloc ked. When
yo ustart theve hicle, the locator lighting is
Light and visibility 14
7

Folding the outside mir rors in/out
#Brief lypress switch 1.
% Ifth e battery has been disconnected or com‐
ple tely discharged ,th e outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproperly. Ad
justing the outside mir rors
#Select there qu ired mir ror using button 3or
4.
#Use button 2toset the position of the mir‐
ro ryo u ha veselected.
Engaging the outside mir rors
#Press and hold button 1.
Yo uwill hear a click and the mir ror audibly
engage in position. The mir ror is set in the
cor rect position.
In fo rm ation on automatic anti-glare mir rors
&
WARNING Risk of burn s and poisoning
due tothe anti- glare mir ror electrolyte
Electrolyte may escape if theglass in an
automatic anti-glare mir ror breaks.
The electrolyte is harmful and causes ir rita ‐
tion. It must not come into contact wi thyour
skin, eyes,respiratory organs or clo thing or
be swallo wed.
#Ifyo u come into contact with electro‐
ly te , obser vethefo llowing:
RRinse the electrolyte from your skin
and seek medical attention immedi‐
atel y.
RIf electrolyte comes into contact
with your eyes, rinse them thor‐
oughly with clean water and seek
medical attention immediately.
RIf th e electrolyte is swallo wed,
immediately rinse your mouth out
th oroughly. Do not induce vomiting.
Seek medical attention immediately.
RImmediate lych ange out of clo thing
which has come into con tact wi th
electrolyte.
RIf an allergic reaction occurs, seek
medical attention immediatel y.
The outside mirrors and inside rearview mir rors
on the driver's side automatically go into anti-
gl are mode if light from a headlamp hits the
inside rearview mir ror.
Light and visibility 15
3

camera1 helps de tect pedestrians and ani‐
mals.
% As infrared light is not visible tothe human
ey e, Night View Assist canremain activated
when there is oncoming traf fic.
The infrared headlamps switch on in the
dark from speeds of appr oximately 5 mph
(10 km/h). This means that, while station‐
ar y, yo udo not ha vethe full visual range and
cannot check whe ther Night View Assist is
wo rking.
Sy stem limitations
Night View Assist cannot displ ayobjects directly
in front of or directly next totheve hicle. It may
be the case that objects are highlighted as well
as pedestrians or animals.
The sy stem may be impaired or may not function
in thefo llowing ins tances:
RPo or visibility, e.g. sno w,rain, fog or spr ay.
RThe windshield is dirty in the vicinity of the
came ra.
RThe camera is fogged up, damaged or cov‐
ered.
RThe infrared camera in thera diator grill is
damaged, dirty, fogged up or co vered.
ROn bends, on hilltops or in dips.
RAt high ambient temp eratures.
Pe destrian and animal de tection byNight
Vi ew Assist
Night View Assist can de tect pedestrians using
typical characteristics, e.g. the body conto urs
and posture of a person standing upright.
Lar geanimals, such as deer, co wsor horses can
also be de
tecte
d. Small animals such as dogs or
cats are not de tected.
Pe destrian and animal de tection is au tomatical ly
switched on when thefo llowing requ irements
are fulfilled:
RNight View Assist is activated.
RThe driving speed is at least 5 mph
(10 km/h).
RIt is dar k.
1NightView Assist display
2Standby symbol for active pedest rian de tec‐
tion
3Highlighting
4Pe destrian de tected
If pedestrian de tection is acti ve,st andby symbol
2 appears. There is no separate symbol for ani‐
mals. De tected pedestrians or animals are high‐
lighted bya color frame.
Ac tivating or deactivating Night View Assist
Re quirements:
RThe vehicle has been star ted or the ignition
is switched on.
236 Driving and parking

RThe light switch is intheà orL posi‐
tion.
RRe versege ar has not been engaged.
#Press button 1.
The appropriate Night View Assist display
appears in the multifunction displa y.
% The infrared headlamps are deactivated at
speeds below 3 mph(5 km/h). The Night Vi
ew image continues tobe displa yed until
yo uswit chit off bypressing button 1.
Switching automatic activation on/off
Re quirements:
RPedestrian de tection is acti ve(→page 236).
RThe car riag ew ay is not lit.
RThe speed is at least 37mph (60 km/h).
If all therequ irements are fulfilled, the night
vision image is automatically shown in the multi‐
function display as soon as people or animals
are de tected.
Multimedia sy stem:
, 9 H K L F O H.k $ V V L V W D Q F H. $ X W
1 L J K W 9 L H Z $ V V L V W
#Ac tivate Oor deacti vate ª the function.
Spotlight function
The spotlight function is an additional function
fo r Night View Assist . Itruns in the bac kground
and flashes the headlamps at de tected persons
wi th four short impulses. This att racts the driv‐
er's attention toapproaching pedestrians. Displ
ayinthe assistance graphic1Spotlight function switched on but not oper‐
ating
2Spotlight function switched on and operating
The pedestrian symbol in the assis tance graphic
indica testh est atus of the spotlight function. If
th e pedestrian symbol is displa yed dark 1,the
function is switched on. If the symbol is dis‐
Driving and parking 237

played bright 2,the conditions forth e Spotlight
function are also fulfilled.
Sy stem limitations
The spotlight function does not flash at animals.
The spotlight function is not active or is active
only toa limited extent if:
RYo u are drivingin city traf fic.
RThe pedestrians are loca ted in the area of an
oncoming vehicle or a vehicle in front.
Ac tivating/deactivating the spotlight func‐
tion
Re quirements:
RPedestrian de tection is acti ve(→page 236).
RThe car riag ewa yis no tlit .
RThe speed is at leas t37 mph(6 0 km/h).
RAd aptive Highbeam Assist Plus is switch ed
on.
If all there qu irements are fulfilled, the headlamp
fl ashes four short pulses at a pedestrian de tec‐
te d on or near tothero ad. Multimedia sy
stem:
, 9 H K L F O H.÷. / L J K W 6 H W
W L Q J V. 6 S R W O L J K W
#Switch the function on Oor off ª.
Blind Spot Assist and Active Blind Spot
Assi st
Function of Blind Spot Assist and Active
Blind Spot Assi st
Blind Spot Assist uses two lateral,rear-facing
ra dar sensors tomonitor the area up to130ft
(40 m) behind your vehicle and 10ft(3 m)
directly next to yourvehicle.
If a vehicle is de tected at speeds ab ove appr ox‐
imately 8 mph (12 km/h) and this vehicle subse‐
qu ent lyenters the monitoring range di rectly next
to yo urvehicle, thewa rning lamp in the outside
mir ror lights up red.
If a vehicle is de tected close to yourvehicle in
th e lateral monitoring range and you switch on
th e turn signal indicator in the cor responding
direction, a warning tone sounds once. The red
wa rning lamp in the outside mir rorflashes. If the turn signal indica
torre mains on, all other de tec‐
te dve hicles are indicated only bytheflashing of
th ere dwa rning lamp.
If yo uove rtake a vehicle quickl y,no warning is
given.
& WARNING Risk of accident despite Blind
Spot Assist
Blind Spot Assist does notreact tovehicles
approaching and overtaking you at a greatly
di fferent speed.
As a result, Blind Spot Assist cannot warn
drivers in this situation.
#Alw ays pay careful attention tothe traf‐
fi c situation and maintain a safe dis‐
ta nce at the side of theve hicle.
Blind Spot Assist and Active Blind Spot Assi st
are only aids. They may failto detect some vehi‐
cles and are no substitute for attentive driving.
Alw ays ensure that there is suf ficient dist anceto
th e side forot her road users and obs tacles.
238
Driving and park ing