2018 MERCEDES-BENZ GLE engine

[x] Cancel search: engine

Page 149 of 398

MERCEDES-BENZ GLE 2018  Owners Manual Comfort drive program The Comfort drive program has the following
characteristics: R
comfort-oriented engine and transmission
settings. R
optimal fuel consumption resulting from the
automatic transmis

Page 150 of 398

MERCEDES-BENZ GLE 2018  Owners Manual Temporary setting X
To activate: shift the DIRECT SELECT lever to
position �[ .X
Pull steering wheel paddle shifter �C or �D .
The temporary setting is active for a certain
amount of time. Under certa

Page 151 of 398

MERCEDES-BENZ GLE 2018  Owners Manual X
To shift up: pull steering wheel paddle
shifter �D .
The automatic transmission shifts up to the
next gear.
All vehicles (except Mercedes-AMG vehi-
cles): if the maximum engine speed in the
gear cur

Page 152 of 398

MERCEDES-BENZ GLE 2018  Owners Manual Problems with the transmission Problem
Possible causes/consequences and �P Solutions
The transmission has
problems shifting gear. The transmission is losing oil. X
Have the transmission checked at a q

Page 153 of 398

MERCEDES-BENZ GLE 2018  Owners Manual G WARNING
Fuel is poisonous and hazardous to health.
There is a risk of injury.
You must make sure that fuel does not come
into contact with your skin, eyes or clothing
and that it is not swallowed. D

Page 154 of 398

MERCEDES-BENZ GLE 2018  Owners Manual Preparing to refuel X
Switch off the engine. X
Remove the SmartKey from the ignition lock.
or, on vehicles with KEYLESS ‑ GO:X
Open the driver's door.
The vehicle electronics now have status �Z

Page 155 of 398

MERCEDES-BENZ GLE 2018  Owners Manual Problems with fuel and the fuel tank Problem
Possible causes/consequences and �P Solutions
Fuel is leaking from the
vehicle.
G WARNING
The fuel line or the fuel tank is faulty.
Risk of explosion or fi

Page 156 of 398

MERCEDES-BENZ GLE 2018  Owners Manual When the DEF supply drops to a minimum, the
Remaining Starts: 16 message is shown in
the multifunction display.
If the Remaining Starts: 16 message
appears in the multifunction display, you can
start