2018 MERCEDES-BENZ GLC COUPE lock

[x] Cancel search: lock

Page 92 of 370

MERCEDES-BENZ GLC COUPE 2018  Owners Manual Make sure that nobody touches the side win-dow during the opening procedure. If some-
body becomes trapped, release the switch or
pull the switch to close the side window again.
GWARNING
While closing

Page 93 of 370

MERCEDES-BENZ GLC COUPE 2018  Owners Manual You can continue to operate the side windows
after you switch off the engine or remove the
SmartKey. This function remains active for five
minutes or until you open a front door.
When the override fea

Page 94 of 370

MERCEDES-BENZ GLC COUPE 2018  Owners Manual Make sure you only touch recessed sensor
surface:.
XMake sure that all the side windows and the
sliding sunroof are closed.
XTo interrupt convenience closing: release
recessed sensor surface :on the d

Page 95 of 370

MERCEDES-BENZ GLC COUPE 2018  Owners Manual Sliding sunroof
Important safety notes
GWARNING
While opening and closing the sliding sunroof, body parts in close proximity could become
trapped. There is a risk of injury.
Make sure that no body par

Page 96 of 370

MERCEDES-BENZ GLC COUPE 2018  Owners Manual XTurn the SmartKey to position1or2 in the
ignition lock.
XPress or pull the 3switch in the corre-
sponding direction.
If you press/pull the 3switch beyond the
pressure point, automatic operation is st

Page 97 of 370

MERCEDES-BENZ GLC COUPE 2018  Owners Manual ProblemPossible causes/consequences andMSolutions
The sliding sunroof can-
not be closed and you
cannot see the cause.If the sliding sunroof is obstructed during closing and reopens again
slightly:
XI

Page 98 of 370

MERCEDES-BENZ GLC COUPE 2018  Owners Manual Correct driver's seat position
GWARNING
You could lose control of your vehicle if you do the following while driving:
Radjust the driver's seat, head restraint,
steering wheel or mirrors
Rfast

Page 103 of 370

MERCEDES-BENZ GLC COUPE 2018  Owners Manual Switching the seat ventilation on/off
Switching on/off
The blue indicator lamps in the button indicate
the blower setting you have selected.
XTurn the SmartKey to position 1or2 in the
ignition lock (Y