4
° Continuous wiping, slow
5 ¯ Continuous wiping, fast #
Turn the combination switch tothe cor re‐
sponding position 1-5. #
Single wipe/washing: pushthe button on
th e combination switch in the direction of
ar row 1.
R í Single wipe
R î Wiping with washer fluid Re
placing the windsc reen wiper blades &
WARNING Risk of becoming trapped if
th e windscreen wipers are switched on
while wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can
be trapped bythe wiper arm. #
Alw ays switch off the windscreen wip‐
ers and ignition before changing the
wiper blades. Moving
the wiper arms tothech ange posi‐
tion #
Switch the ignition on and switch off again
immediatel y. #
Within around 15seconds, press button
î onthe combination switch for appro x‐
ima tely thre e seconds (→ page135).
The wiper arms will mo veinto thech ange
position.
Re moving the wiper blades #
Foldthe wiper arms away from the wind‐
screen. #
Hold the wiper arm with one hand. With the
ot her hand, turn the wiper blade in the direc‐
tion of ar row1away from the wiper arm as
fa r as it will go. #
Slide catch 2inthe direction of ar row 3
until it engages in there mo val position. #
Remo vethe wiper blade from the wiper arm
in the direction of ar row4. 13 6
Light and sight
Fi
tting the wiper blades #
Inse rtthe new wiper blade into the wiper
arm in the direction of ar row1. #
Slide catch 2inthe direction of ar row 3
until it engages in the locking position. #
Make sure that the wiper blade sits cor rectly. #
Foldthe wiper arms back onto the wind‐
screen. #
Switch the ignition on. #
Press theî button on the combination
switch.
The wiper arms will mo veinto the original
position.
Maintenance display
The maintenance display is available on lyfor
st andard windsc reen wipers. #
Remo veprotective film 1 from the mainte‐
nance display on the tip of the newly fitted
wiper blades.
If th e colour of the maintenance display changes
from black to yellow, the wiper blades should be
re placed.
% The duration until the colour changes varies
depending on the usage conditions. Re
placing the windsc reen wiper blades
(MAGIC VISION CONT ROL) Moving
the wiper arms into thech ange posi‐
tion #
Switch the ignition on, and switch it off again
immediatel y. #
Within around 15seconds, press button
î onthe combination switch for around 3
seconds (→ page135).
The wiper arms will mo veinto thech ange
position. Light and sight
137
Re
moving the wiper blades #
Tobring the wiper blade into position to
be remo ved: raise the wiper arm away from
th e windscreen and hold it with one hand.
Wi th th eot her hand, turn the wiper blade in
th e direction of ar row1beyond the point of
re sis tance.
The wiper blade engages in there mo val posi‐
tion with a clic k. #
Toremo vethe wiper blade: pressrelease
knob 2, pull the wiper blade in the direction
of ar row3and remo ve.
Fi tting the wiper blades #
Push the new wiper blade onto the wiper arm
in the direction of ar row1until release
knob 2engages. #
Press the wiper blade be yond the point of
re sis tance in the direction of ar row3on
th e wiper arm.
The wiper blade engages with a noticeable
click and mo ves freely again. #
Foldthe wiper arm back onto the wind‐
screen. #
Switch the ignition on. #
Press button îonthe combination
switch (→ page135).
The wiper arms will mo veinto the original
position. 13 8
Light and sight
#
Clean draught stop net 1with a damp clo th
in conjunction with the care products and
cleaning agents recommended and appr oved
fo r Mercedes-Benz. Cleaning
thefo lding draught stop Re
quirements:
R Never use a high-p ressure cleaner toclean
th e net of the wind deflector. R
Obser vethe no tes on the cor rect ins tallation
and stow ing location of thefo lding draught
st op (→ page 93). #
Clean the net of thefo lding draught stop with
a damp clo thin conjunction with the care
products and cleaning agents recommended
and appr ovedby Mercedes-Benz. Note
s on care of car parts &
WARNING Risk of entrapment if the
windscreen wipers are swit ched on while
th e windscreen is being cleaned
If th e windscreen wipers are set in motion
while you are cleaning the windscreen or
wiper blades, you can be trapped bythe
wiper arm. #
Alw ays switch off the windscreen wip‐
ers and the ignition before cleaning the
windscreen or wiper blades. &
WARNING Risk of bu rning from theta il‐
pipe or tailpipe trim
The tailpipe and tailpipe trim can become
ve ry hot. If you come into contact with these
car parts, you could burn yourself. #
Alw ays be particular lycareful when in
th e vicinity of theta ilpipe and tailpipe
trims and supervise children very
closely when in this area. #
Before any con tact, allow the car parts
to cool down. Maintenance and care
407
Obser
vethefo llowing information: Note
s on cleaning and car eA voiding vehicle damage
Wheels/rims Usewate r and acid-free wheel cleaners. R
Do not use acidic wheel cleaners toremo vebrake dust.
This could damage wheel bolts and brake components.
R Toavoid cor rosion of the brake discs and brakepads, drive
th eve hicle for a few minutes af ter cleaning before parking
it. The brake discs and brakepads warm up and dry out.
Wi ndo ws
Cleanthe windo wsonthe inside and outside using a damp
clo thand cleaning agents recommended byMercedes-Benz. Do not use dry clo
ths or abrasive or sol vent-based cleaning
agents toclean the inside of windo ws.
Wi per blades
Fold out the wiper blades and clean them using a damp clo th.D o not clean the wiper blades too of ten.
Ex terior lighting
Cleanthe lenses with a wet sponge and mild cleaning agent,
e.g. car sha mpoo. Only use cleaning agents or cleaning clo
thsth at are suitable
fo r plast ic lenses.
Sensors Cleanthe sensors in the front and rear bumper and in the
ra diator grille with a soft clo thand car shampoo. When using a high-pressure cleaner, main
tain a minimum dis‐
ta nce of 30 cm.
Re versing camera
and 360° Camera R
Open the camera co ver with the multimedia sy stem
(→ page 228).
R Use clean water and a soft clo thtoclean the camera lens. Do not use a high-pressure cleaner.408
Maintenance and care
Checking ............................................
.435
Che cking the tyre pressure (tyre
pressure monitoring sy stem) ............... 438
Fitting .................................................. 451
Flat tyre ............................................... 414
Inter changing ...................................... 446
MOExtended tyres ...............................4 15
No ise .................................................. .435
No tes on fitting ................................... 443
Re moving ............................................. 451
Re placing .................................... 443,447
Re starting the tyre pressure loss
wa rning sy stem ................................... 442
Re starting the tyre pressure monitor‐
ing sy stem ...........................................4 39
Selection ............................................. 443
Snow chains ........................................ 435
St oring ................................................ 446
TIREFIT kit ............................................ 416
Ty re pressure (N otes) .......................... 436
Ty re pressure loss warning sy stem
(function) ............................................. 442
Ty re pressure monitoring sy stem
(function) ............................................. 438
Ty re pressure table .............................. 437
Un usual handling characteristics ........ 435 Wi
-Fi ........................................................ .292
Overview ............................................. 292
Setting ................................................. 293
Setting up a hotspot ............................ 294
Setting up an Internet connection ....... 357
Wi nd deflector
Care ....................................................4 05
Wi ndo ws
Closing (all) .......................................... .84
Opening (all) .......................................... 84
Wi ndo ws
see Side windo ws
Wi ndo ws(Care) ...................................... .407
Wi ndscreen ...................................... 137, 14 3
Defrosting ............................................ 14 3
Re placing wiper blades (MAGIC
VISION CONTROL) ............................... 137
Wi ndscreen
see Windsc reen
see Windshield
Wi ndscreen washer fluid ........................ 467
No tes ................................................... 467 Wi
ndscreen washer sy stem
To pping up ...........................................3 98
Wi ndscreen wipers
Changing the wiper blades .................. 13 6
Re placing wiper blades (MAGIC
VISION CONTROL) ............................... 137
Switching on/off ................................. 13 5
Wi ndshield ............................................... 13 6
Changing the wiper blades .................. 13 6
Wi nter operation
Snow chains ........................................ 435
Wi nter tyres
Setting the permanent speed limita‐
tion ...................................................... 202
Wi per blades
Ca re .................................................... 407
Re placing .............................................1 36
Re placing (MAGIC VISION CONTROL)
.............................................................1 37
Wire lesscharging
Fu nction/no tes ................................... 12 3
Mobile phone ....................................... 12 5 Index
581