2018 MERCEDES-BENZ E-CLASS CABRIOLET wheel

Activating or deactivating Blind Spot Assi st
or Active Blind Spot Assi st
Multimedia sy stem:
00869HKLFOH00CFk $VVLVWDQFH00CF%OLQG
6SRW $VVLVW
00BBAc tivate 0073or deacti vate 0053 the function.
Ac tive Lane Keeping Assist
Active Lane Keeping Assist function
Active Lane Keeping Assist monitors the area in
front of your vehicle bymeans of multifunction
camera 1. It ser vesto protect you against unin‐
te ntional lyleaving your lane. You will be warned
by means of a vibration in thesteering wheel and a course-cor
recting brake application guides
yo u back into your lane.
Yo u are warned byvibration pulses in thesteer‐
ing wheel in thefo llowing circums tances:
RAc tive Lane Keeping Assist de tects lane
markings.
RA front wheel passes over the lane markings.
Yo uwill also be guided back into your lane by
means of a course-cor recting brake application
if th efo llowing conditions are me t:
RActive Lane Keeping Assist de tects lane
markings.
RA front wheel drives over a solid lane mark‐
ing.
Whe ther a warning is issued and when this
occurs also depends on the selected sensitivity
setting (s tanda rdor adaptive).
If yo ufa ilto adapt your driving style, Ac tive Lane
Ke eping Assist can neither reduce therisk of an
accident nor override the la wsof ph ysics. It can‐
not take into account road, weather or traf fic
conditions. Active Lane Keeping Assist is only an
aid. You are responsible forth e dis tance tothe
Driving and pa rking 19
5

RActive Dis tance Assist DISTRONIC
(→pa ge 162)
0075 NO
TEEngine damage duetoexc essively
high engine speeds
The engine will be damaged if youdriv ewit h
th e engine in theov errevving range.
00BBDo not drive wi th the engine in theove r‐
re vving range.
The fuel supply is inter rupted toprotect the
engine when there d band in tach ome ter3
(o ve rrev ving range) is reached.
During no rmal operating conditions, coolant
te mp erature display 4may rise tothere d
mar k.
0071
WARNING Danger of burn s when open‐
ing the hood
If yo u open the hood when the engine has
ove rheated or during a fire inthe engine
compartment, you could come into contact
wit h hot gases or other escaping operating
fl uids.
00BBBefore opening the hood, allow the
engine tocool down.
00BBIntheeve nt of a fire inthe engine com‐
partment, keep the hood closed and
call thefire service.
Overview of the butto ns onthest eering
wheel
1But ton group:
¤ Main menu and ba ckbutton (on-board
computer)
0063 Switches sound off/on 0081
Increases thevo lume
0082 Decreases thevo lume
2Touch Control (on-board co mputer)
3Touch Control (multimedia sy stem)
4Button group:
¤ Main menu and back button (multime‐
dia sy stem)
£ LINGU ATRO NIC or voice control sys‐
te m
0061 Makes/accepts a call
0076 Rejects/ends a call
Ope rating the on-board co mputer
0071
WARNING Risk of dist raction from infor‐
mation sy stems and communications
equipment
If yo u operate information and communica‐
tion equipment integ rated in theve hicle
when driving, youwill be distracted from the
traf fic situation. This could also cause youto
lose control of theve hicle.
200
Instrument Display and on-board computer

00BBOnly operatethis equipment when the
traf fic situation permits.
00BBIf yo u cannot besure of this, stop the
ve hicle whilst paying attention toroad
and traf fic conditions and ope rate the
equipment with theve hicle stationar y.
You must observ eth e legal requirements forth e
country in whi chyou are cur rently driving when
operating the on-board computer.
00CE The on-board computer displa ysappear on
th e multifunction display (
→page 202).
The on-board computer can be operated using
To uch Control 2and back butto n1 onthe
left-hand side of thesteering wheel.
Dif fere nt acoustic signals pr ovide feedback
when operating the on-board computer, e.g:
Rre aching the end of a list
Rscrolling thro ugh a list
The following menus are available:
R6HUYLFH
R'ULYH$VVLVW
R7ULS
R1DYLJDWLRQ
R5DGLR
R0HGLD
R3KRQH
RVe hicles with an instrument display in
th e widescreen cockpit: 'LVS &RQWHQW
R+HDGXS 'LVS
The menus can be called up from the menu bar
on the multifunction displa y.
00BBTocall up the menu bar: pressthe back
button on the left 1.
00BBToscroll in the menu bar: swipetothe left
or right on the left-hand Touch Control 2.
00BBTocall up the menu or confirm the selec‐
tion: press the left-hand Touch Control 2.
00BBToscroll through displa ysor lists on the
menu: swipe upwards or down wards on the
left-hand Touch Control2.
00BBTo call up a submenu or confirm the
selection: pressthe left-hand Touch Control
2.
In stru ment Display and on-board computer 201

traffic situation. This could also cause youto
lose control of theve hicle.
00BBOnly operate this equipment when the
traf fic situation permits.
00BBIf yo u cannot besure of this, stop the
ve hicle whilst paying attention toroad
and traf fic conditions and ope rate the
equipment with theve hicle stationar y.
Whentelephoning, you must observ eth e legal
re qu irements forth e count ryin which you are
cur rently driving.
Ve hicles with the COMAND multimedia sys‐
te m: The most recent telephone connections
(dialed, receive d and missed calls) are displa yed
on the3KRQH menu.
00BBSelect an entr y:swipe upwards or down‐
wa rds on the left-hand touch cont rol.
00BBPress the left-hand touch cont rol.
If th ere is only one telephone number
sa ve dto an entr y:thete lephone number is
selecte d.
00BBIfth ere are multiple telephone numbers
sa ve dto an entr y:swipe upwards or down‐
wa rds on the left-hand touch cont rolto
select the desired telephone number.
00BBPress the left-hand touch cont rol.
The telephone number is dialed.
The following displa ysmay appear ins tead of the
te lephone numbers dialed:
R3OHDVH :DLW :th e application is starting.
When a Blue tooth®connection tothe mobile
phone is not es tablished, the menu for
authorizing and connecting a mobile phone is
displa yed in the multimedia sy stem
(
→page 271).
R8SGDWLQ JGDWD :the call list is being upda‐
te d.
R,PSRUWLQJ &RQWDFWV :th e conta cts from the
mobile phone or from a storage medium are
being impor ted.
Ac cepting/rejecting a call
When youre ceive a call, the,QFRPLQJ &DOO mes‐
sage appears on the head-up displa y.
00BBSwipe upwards or down wards on the left-
hand touch cont rol and select 0061(Accept)
or 0076 (Reject).
00BBPress the left-hand touch cont rol.
The call may be accep ted/rejec ted using the
0061 or0076 buttons on thesteering wheel.
Ad justing the Head-up Displ aysettings via
th e on-boa rdcompu ter
On-board computer:
0086+HDGXS 'LVS
The following Head-up Display settings can be
adjus ted:
R3RVLWLRQ
R%ULJKWQHVV
R'LVSOD\ &RQWHQW
00BBTo select a setting: swipe upwards or down‐
wa rds on the left-hand Touch Control.
00BBPress the left-hand Touch Control.
00BBTo adjust a value: swipe upwards or down‐
wa rds on the left-hand Touch Control.
00BBPress the left-hand Touch Control.
Instru ment Display and on-board computer 209

Notes on operating saf ety
0071
WARNING Risk of dist raction from infor‐
mation sy stems and communications
equipment
If yo u operate information and communica‐
tion equipment integ rated in theve hicle
when driving, youwill be dis tracted from the
traf fic situation. This could also cause youto
lose control of theve hicle.
00BBOnly operate this equipment when the
traf fic situation permits.
00BBIf yo u cannot besure of this, stop the
ve hicle whilst paying attention toroad
and traf fic conditions and ope rate the
equipment with theve hicle stationar y.
0071
WARNING Risk of dist raction from oper‐
ating mobile communication equipment
while theve hicle is in motion
If yo u operate communication equipment
integrated intheve hicle when driving, you
will be distracted from the tra ffic situation.
This could also cause youto lose control of
th eve hicle.
Only operate this equipment when theve hi‐
cle is stationar y.
Foryo ur ow n safe ty, always obser vethefo llow‐
ing points when operating mobile communica‐
tions equipment and especially your voice con‐
trol sy stem:
RObser vethe legal requ irements forth e coun‐
try in which you are driving.
RWhile driving, only oper ate mobile communi‐
cations equipment and your voice control
sy stem when the tra ffic conditions permit it.
Yo u may otherwise be distracted from the
traf fic conditions and cause an accident,
injuri ngyourself and others.
RDo not use thevo ice control sy stem in an
emer gency as your voice can change and
yo ur telephone call can be unnecessarily
dela yed.
RFa miliarize yourself with thevo ice control
sy stem functions before starting the journe y.
Operation
Operating the multifunction steering wheel
The Voice Cont rol Sy stem is operational appr ox‐
imately thirty seconds af terth e ignition is
switched on.
10063 Switches the sound off/on (ends The
Vo ice Cont rol Sy stem)
200E3 Starts theVo ice Cont rol Sy stem
30061 Makes/accepts a call
40076Rejects/ends a call (ends theVo ice
Cont rol Sy stem)
21 2
Voice Cont rol Sy stem

50081Increases thevo lume
60082 Decreases thevo lume
Conducting a dialog
00BBTo start or continue a dialog: pressthe
00E3 button on the multifunction steering
wheel.
Yo u can say a voice command af ter an
acou stic signal.
00BBTo cor rect an entry :say the&RUUHFWLRQ
vo ice command.
00BBTo select an entry from the selection lis t:
say the line number or the conte nts.
00BBTobrows eth e selection lis t:say the&RQ
WLQXH or%DFN voice command.
00BBTo inter rupt the dialog: saythe3DXVH voice
command.
00BBTo cancel the dialog: saythe&DQFHO voice
command or press the0063 button on the
multifunction steering wheel.
Operable functions
Yo u can use theVo ice Cont rol Sy stem tooperate
th efo llowing equipment depending on thefe a‐
tures:
RTe lephone
RText message s
RNavigation
RAddress book
RRadio
RAu dio (memory card, Media Inter face, USB
and Blu etoo th®audio)
RVe hicle
Overview of types of voice commands
A distinction is made between thefo llowing
vo ice commands:
RGlobal voice commands can be said at any
time and rega rdless of the cur rent applica‐
tion, e.g. thevo ice commands 1DYLJDWH WR,
&DOO or7H[W PHVVDJH WR.
RApplication-specific voice commands are
only available forth e active application.
1Global voice commands
2Application-specific voice commands
On the display next tothe active application,
ex amples of global voice commands and the cor‐
re sponding application-specific voice commands
are displa yed on an autocue. This makes ent ry
easier and supports interactive operation. The
list can be scrolled or it can be operated by
speech or the controller/touchpad.
Vo ice Cont rol Sy stem 21
3

Number entry functions
RThe numbe rsallo wed are ]HURtoQLQH .
RTelephone numbers can be entered as single
digits.
Information on the language setting
Yo u can change the language of theVo ice Con‐
trol Sy stem via the sy stem language settings. If
th e set sy stem language is not suppor tedby the
Vo ice Cont rol Sy stem , En glish will be selecte d.
The Voice Cont rol Sy stem is available foryo uin
En glish, French and Spanish.
Using theVo ice Control Sy stem ef fectively
Fu nction of audible help functions
Youre ceive information and help for:
ROptimal operation: saythe+HOS YRLFH FRQ
WURO V\VWHP voice command.
RCur rent application: pressthe00E3 button
on the multifunction steering wheel and say
th e+HOS voice command.
RContinued dialog: saythe+HOS voice com‐
mand during a voice dialog.
RA specific sy stem: saythevo ice commands
fo rth e desired sy stem, e.g. +HOS WHOHSKRQH.
Notes on how toimpr ovespeech quality
Ifth eVo ice Control Sy stem does not under‐
st and you:
Ronly operate theVo ice Cont rol Sy stem from
th e driver's seat.
Rsay thevo ice commands cohe rently and
clear ly, but do not exaggerate thewo rds.
Ravo id loud noises that cause inter fere nce
while making a voice command ent ry, e.g.
th e blo wer.
Rsay thevo ice tag with the same intonation
when creating voice tags.
If an addre ss book entry voice tag is not rec‐
ognized:
Ronly create sensible address book entries in
th e sy stem/mobile phone, e.g. enter sur‐
name and firs t name in the cor rect field.
Rdo not use any abbr eviations, unnecessary
spaces or special characters.
If a station list entry is not recognized:
Rsay the5HDG RXW VWDWLRQ OLVW voice command.
Essential voice commands
Overview of switch voice commands
Swit chvoice commands can be used toopen
cer tain applications. The voice command selec‐
tion can be used rega rdless of the application
th at is cur rently acti ve.
21 4
Voice Cont rol Sy stem

ENERGIZING comfort
ENERGIZING comfort program ove rview
Prog ram ove rview
Prog rams Function
Re fresh
Can maketargeted changes tothe interior climate torefresh vehicle occupants. Cooling air flow and ioniza‐
tion purify the air. The vehicle interior is illuminated with cool colors and the seats are ventilated.
Wa rmth
Can increase the comfort le vel of the occupants. The vehicle's panel, seat and steering wheel heater pro‐
duce a cozy warmth. The air is pu rified using ionization and a pleasant fragrance is released. The vehicle
interior is illuminated with warm lighting.
Vi tality
Can countera ct fatigue in mono tonous driving situations. Fast-paced music and a vitalizing massage pro‐
vide invigorating stimulation forth eve hicle occupants. The air is purified using ionization and a pleasant
fragrance is released. The vehicle interior is illuminated in a stimulating hue and the seat is ventilated.
Pleasure Can promotea positive mood in the occupants. Moderately fastmusic is pla yed and a massage program is
activated. The air is purified using ionization and a pleasant fragrance is released. The vehicle interior is
illuminated with amicable lighting.
Multimedia sy stem 24
3