2018 MERCEDES-BENZ E-CLASS CABRIOLET warning

RAtspeeds between 25 mph(4 0 km/h) and
45 mph(7 0 km/h) when thesteering wheel
is turned.
Tr af fic circle and intersection function: the
cornering light is acti vated on bo thsides thro ugh
an eva luation of the cur rent GPS position of the
ve hicle. It remains active until af terth eve hicle
has left the tra ffic circle or the intersection.
Ad aptive Highbeam Assist
Function of Adaptive Highbeam Assist
0071
WARNING Risk of accident despite
Ad aptive Highbeam Assist
Ad aptive Highbeam Assist does not recog‐
nize thefo llowing road users:
RRo ad users without lights, e.g. pedes‐
trians
RRo ad users with poor lighting, e.g.
cyclists
RRo ad users whose lighting is obstructed,
e.g. bya bar rier
On very rare occasions, Adaptive Highbeam
Assist may failto recognize other road users
with their own lighting, or may recognize
th em too late.
In these or similar situations, the automatic
high beam is not deactivated or is activated
despite the presence of other road users.
00BBAlw ays obser vethe tra ffic carefully and
switch off the high beam in good time.
Sy stem limitations
Ad aptive Highbeam Assist cannot take into
account road, weather or traf fic conditions.
De tection may be restricted if:
RVi sibility is impaired, forex ample in fog,
heavy rain or sno w.
RThere is dirt on the sensors or the sensors
are obscured.
Ad aptive Highbeam Assist is only an aid.You are
re sponsible for adju sting theve hicle's lighting to
th e pr evailing light, visibility and traf fic condi‐
tions.
Ad aptive Highbeam Assist switch es automati‐
cally between:
RLow beam
RHigh beam
At speeds abo ve19 mp h (30 km/h):
RIf no other road users are de tected, high
beam is au tomatical lyswitched on.
11 4
Light and visibility

Windshield wiper and windshield washer
sy stem
Switching the windshield wipers on/off
0047005A Windshield wipe rsoff
00480062 Intermittent wiping, normal
00490063Intermittent wiping, frequent
004A00AAContinuous wiping, slow
004B00A9Continuous wiping, fast
00BBTurn the combination switch tothe cor rect
position 0047-004B.
00BBSin gle wipe/washing: pushthe button on
th e combination switch in the direction of
ar row 1.
R00D3 Single wipe
R00D4Wipes with washer fluid
Changing the windshield wiper blades
0071
WARNING Risk of becoming trapped if
th e windshield wipers are switched on
while wiper blades are being replaced
If th e windshield wipers begin tomo vewhile
yo u are changing the wiper blades, you can
be trapped bythe wiper arm.
00BBAlw ays switch off the windshield wipers
and the ignition before changing the
wiper blades.
Moving the wiper arms toave rtical position
00BBSet the windshield wipers tothe00AA slow
continuous wiping position on the combina‐
tion switch.
00BBAs soon as the wiper arms are vertical rela‐
tive tothe hood, switch off the ignition.
Re moving the wiper blades
00BBFoldthe wiper arms away from the wind‐
shield.
Light and visibility 11
7

Ifth e color of the maintenance display changes
from black to yellow, the wiper blades should be
re placed.
00CE The duration of the color change varies
depending on the usage conditions.
Re placing the windshield wiper blades
(MAGIC VISION CONTROL)
0071 WARNING Risk of becoming trapped if
th e windshield wipers are switched on
while wiper blades are being replaced
If th e windshield wipers begin tomo vewhile
yo u are changing the wiper blades, you can
be trapped bythe wiper arm.
00BBAlw ays switch off the windshield wipers
and the ignition before changing the
wiper blades.
Moving the wiper arms toave rtical position
00BBSwit chon the po wer supp ly.
00BBSet the windshield wiper tothe00AA slow
continuous wiping position on the combina‐
tion switch.
00BBAs soon as the wiper arms are vertical rela‐
tive tothe hood, switch off the po wer supply.
Re moving the wiper blades
00BBTo bring the wiper blade into position to
be remo ved: raise the wiper arm away from
the windshield and hold it with one hand.
Wi th th eot her hand, turn the wiper blade in
th e direction of ar row1beyond the point of
re sis tance.
The wiper blade engages in there mo val posi‐
tion with a clic k.
00BBToremo vethe wiper blade: pressrelease
knob 2, pull the wiper blade in the direction
of ar row3and remo ve.
Light and visibility 11
9

Installingthe wiper blades
00BBPush the new wiper blade onto the wiper arm
in the direction of ar row1untilre lease
knob 2engages.
00BBPress the wiper blade be yond the point of
re sis tance in the direction of ar row3on
th e wiper arm.
The wiper blade engages with a noticeable
click and mo ves freely again.
00BBLay the wiper arm back on the windshield.
Mir rors
Operating the outside mir rors
0071
WARNING Risk of injury from adjusting
th eve hicle settings while theve hicle is in
motion
Yo u could lose cont rol of theve hicle in the
fo llowing situations:
Rifyo u adjust the driver's seat, the head
re stra int, thesteering wheel or the mir ror
while theve hicle is in motion
Rifyo ufa sten your seat belt while theve hi‐
cle is in motion
00BBBefore starting the engine: adjust the
driver's seat, the head restra int, the
steering wheel or the mir ror and fasten
yo ur seat belt.
0071
WARNING Risk of accident due tomis‐
judgment of dis tances when using the
passenger mir ror
The outside mir ror on the front passenger
side reflects objects on a smaller scale. The
objects in view are in fact closer than they
appear.
As a result, you may mis judgethe dis tance
between you and thero ad user driving
behind you, forex ample, when changing
lanes.
00BBTherefore, alw ays look over your shoul‐
der in order toensure that you are
aw are of the actual dis tance between
yo u and thero ad users driving behind
yo u.
12 0
Light and visibility

Folding the outside mir rors in/out
00BBBrief lypress switch 1.
00CE Ifth e battery has been disconnected or com‐
ple tely discharged ,th e outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproperly. Ad
justing the outside mir rors
00BBPress the3 or4 buttons toselect the out‐
side mir rorto be set.
00BBPress the2 button toset the position of the
mir rorgl ass.
Engaging the outside mir rors
00BBPress and hold button 1.
Yo uwill hear a click and the mir ror audibly
engage in position. The outside mir ror is set
in the cor rect position.
Au tomatic anti-glare mir rorsfunction
0071
WARNING Risk of burn s and poisoning
due tothe anti- glare mir ror electrolyte
Electrolyte may escape if theglass in an
automatic anti-glare mir ror breaks.
The electrolyte is harmful and causes ir rita ‐
tion. It must not come into contact wi thyour
skin, eyes,respiratory organs or clo thing or
be swallo wed.
00BBIfyo u come into contact with electro‐
ly te , obser vethefo llowing:
RRinse the electrolyte from your skin
and seek medical attention immedi‐
atel y.
RIf electrolyte comes into contact
with your eyes, rinse them thor‐
oughly with clean water and seek
medical attention immediately.
RIf th e electrolyte is swallo wed,
immediately rinse your mouth out
th oroughly. Do not induce vomiting.
Seek medical attention immediately.
RImmediate lych ange out of clo thing
which has come into con tact wi th
electrolyte.
RIf an allergic reaction occurs, seek
medical attention immediatel y.
The insiderearview mir ror and the outside mir‐
ro r on the driver's side automatically go into
anti- glare mode if light from a headlamp hits the
inside rearview mir ror.
Light and visibility 12
1

Windo ws fo gged up on the outside
00BBSwit chon the windshield wiper.
00BBPress the0058 button.
Switching air-recirculation mode on/off
00BBPress the0072 button.
The interior air will be recirculated.
Air-recirc ulation mode is switched off automati‐
cally.
00CE If air-recirculation mode is switched on, the
windo wsmay fog up more quickl y.Switch on
ai r-re circulation mode only brie fly.
Switching there sidual heat on or off
Re quirements:RThe vehicle is par ked.
It is possible tomake use of there sidual heat
from the engine tocontinue heating or ventilat‐
ing the front compartment of theve hicle for
appr oximately 30 minutes.
00BBTo switch on: pressthe0006 button. Re
sidual heat is switched off automaticall y.
Activating and deactivating ionization
Multimedia sy stem:
00869HKLFOH00CFb &OLPDWH &RQWURO00CF,RQL
]DWLRQ
Ionization cleans and refreshes the interior air of
th eve hicle. The ionization of the interior air is
odorless.
00BBSwitch the function on 0073or off 0053.
Frag rance sy stem
Setting the frag rance sy stem
Re quirements
RAutomatic climate control is activated.
RThe glov e box is closed. Multimedia sy
stem:
00869HKLFOH00CFb &OLPDWH &RQWURO00CF$LU
)UHVKHQHU
The fragrance sy stem distributes a pleasant fra‐
grance thro ughout theve hicle interior from a fla‐
con located in theglove box.
00BBToset the intensity: select+LJK,0HGLXP,
/RZ or2II.
Inserting or removing the flacon ofthe fra‐
gr ance sy stem
0071
WARNING Risk of injury from liquid per‐
fume
If ch ildren open theflacon, they could drink
th e liquid perfume or it could come into con‐
ta ct wi th theireyes.
00BBConsult a doctor immediately if liquid
perfume has been drunk.
00BBIf liquid perfume comes into conta ct
wi th your eyes or skin, rinse your eyes
with clean water.
00BBIf sym ptoms continue, consult a doctor.
Climate contro l12
7

00D2ENVIRONMENTALNOTEEnvironmental
damage duetoimproper disposal of full
fl acons
Fu llflacons must not be disposed
of with household waste.
00BB
Fu llflacons must be take nto
a harmful subs tance collection point.
1Cap
2Flacon
00BBTo inser t:slide theflacon into the holder as
fa r as it will go.
00BBTo remo ve:pull out theflacon.
If yo udo not use genuine Mercedes-Benz interior
pe rfumes, observ eth e manufacturers' saf ety
notices on the perfume pac kaging. Dispose of
thege nuine Mercedes-Benz interior
pe rfume flacon when it is em ptyand do no tre fill
it.
Re fillable flacon
00BBUn scr ew the cap of the em ptyflacon.
00BBFill theflacon with a maximum of 0.5 fl. oz.
(15 ml).
00BBScr ew the cap back on totheflacon.
Alw aysre fill th e em ptyre fillable flacon with the
same perfume. Obser vethe separate informa‐
tion sheet attached totheflacon.
Air vents
Ad justing the front air vents
0071
WARNING ‑ Danger of burn s or frostbite
due tobeing too close tothe air vents
Ve ry hot or very cold air can flow from the air
ve nts.
This could result in burns or frostbite in the
immediate vicinity of the air vents.
12 8
Climat e control

1Airvent controller
2Air vent
00BBTo open or close: turn controller1tothe
left or right. Ad
justing the AIRSCARF vents
0071
WARNING Risk of burn s causedbythe
heating output from AIRSCARF being too
high
When AIRSCARF is switched on, very hot air
can flow from the outlet opening in the head
re stra ints.
This could result in burns in the immediate
vicinity of the outlet opening.
00BBTu rn the heating output down in good
time.
0075 NO
TEDama gecaused toAIRSCARF by
th e use of pr otective co vers
If a pr otective co ver is placed overth e front
seat head restra ints, theflow of air from the
AIRSCARF vent is hinde red.
This can cause AIRS CARF toove rheat and be
damaged.
00BBDo not use pr otective co vers on head
re stra ints with AIRSCARF.
Make sure that there are no objects co vering the
intake grille on the back of the head restra int.
00BBYo u can adjust the blo wer output of AIR‐
SCARF vents 1using the AIRSCARF button
(
→page 94).
00BBAd just the height of AIRSCARF vents 1and
th e cur rent of air byadjusting the height of
th e head restra int (
→page 89).
13 0
Climat e control