fo
rw ard-facing child restra int sy stems
(0013 page71).
If th e front passenger seat is occupied,
ensure, bo thbefore and during the jour‐
ne y,that thest atus of the front
passenger front airbag is cor rect forthe
cur rent situation (0013 page 44).
R Obse rveth ewa rning labels in theve hicle
interior and on thech ild restra int sy stem.
R Also secure TopTe ther if present.
Do not alter thech ild restra int sy stem 000A
WARNING Risk of inju rydue toaltera‐
tions tothech ild restra int sy stem
The child restra int sy stem may no longer
function as it is supposed toifyo u make
alterations or attach objects toit, e.g. toys or
unsuitable accessories. This poses an
increased risk of injury!
Ne ver alter thech ild restra int sy stem. Only
attach accessories which the manufacturer
of thech ild restra int sy stem has authorised
especially forth is ch ild restra int sy stem. Mercedes‑Benz
recommends Mercedes-Benz
care products for cleaning child restra int sys‐
te ms recommended byMercedes-Benz.
Only use child restra int sy stems which are in
proper working condition 000A
WARNING Risk of inju ryor death caused
by the use of damaged child restra int
sy stems
Child restra int sy stems or their retaining sys‐
te ms that ha vebeen subjec tedto a load in
an accident may then not be able toper form
th eir intended pr otective function.
The child cannot be restra ined in theeve nt of
an accident, heavy braking or a sudden
ch ange of direction. 0007
Alw aysre place child restra int sy stems
immediately that ha vebeen damaged or
in vo lved in an accident. 0007
Have the securing sy stems forth ech ild
re stra int sy stems checked at a qualified
specialist workshop before ins talling a
ch ild restra int sy stem again. Av
oiding direct sunlight 000A
WARNING Risk of bu rns when thech ild
seat is exposed todirect sunlight
If th ech ild restra int sy stem is exposed to
direct sunlight or heat, parts could heat up.
Children could suf fer burns on these parts,
particularly on me tallic parts of thech ild
re stra int sy stem. 0007
Alw ays make sure that thech ild
re stra int sy stem is not exposed to
direct sunlight. 0007
Protect it with a blank et,fo rex ample. 0007
Ifth ech ild restra int sy stem has been
ex posed todirect sunlight, allow it to
cool before secu ring a child into it. 0007
Never lea vechildren unat tended in the
ve hicle. Occupant saf
ety51
0007
Tointer rupt automatic operation: press or
pull the0062 button again.
0009 Automatic operation for closing is available
on lyforth e front side windo ws.
When theve hicle is switched off, the side win‐
do ws can continue being ope rated.
The function is available for around five minutes
or until a door is opened. All side windo
wscan be opened or closed simul‐
ta neously using button 1.
0009 Only vehicles with automatic transmission
ha ve this function. 0007
Swit chon the ignition. 0007
Toopen: press and hold button 1tothe
point of resis tance. 0007
Toopen ful ly:press and hold button 1
be yond the point of resis tance. 0007
Toclose: pull and hold button 1.
Au tomatic reve rsing function of the side win‐
do ws
If an object bloc ksa side wind owduring the
closing process, the side window opens again
automaticall y.The automatic reve rsing function
is only an aid and is not a substitute foryo ur
attentiveness. 0007
When closing, make sure that no body parts
are in the closing area. 000A
WARNING Risk of becoming trapped
despi tethere being reve rsing pr otection
on the side window
The reve rse function does not react:
R tosoft, light and thin objects, e.g. fingers
R during resetting
This means that there ve rse function cann ot
pr eve nt someone from becoming trapped in
th ese situations. 0007
When closing, make sure that no body
parts are in the closing area. 0007
If someone becomes trapped, press the
0062 button toopen the side window
again. Au
tomatic function of the side windo ws The side windo
wsare closed automatically when
th eve hicle is switched off:
R if it starts torain (de tection bythera in sen‐
sor on the windscreen)
R intheeve nt of extreme outside temp eratures 86
Opening and closing
R
afte r six hours
R ifth ere is a malfunction in the po wer supply
The side windo wsare closed as far as theve nti‐
lation position rega rdless of thest atus of the
soft top.
If th e side windo wsare bloc ked during auto‐
matic closing, the side window concerned will
open again slightl y.The automatic function is
th en deactivated. Con
venience opening (ventilating theve hicle
before starting a journey) 000A
WARNING Risk of entrapment when
opening a side window
When opening a side windo w,parts of the
body could be dr awn in or become trapped
between the side window and window frame. 0007
When opening, make sure that nobody
is touching the side windo w. 0007
Release the button immediately if
somebody becomes trapped. 000A
WARNING Risk of becoming trapped
when opening/closing the soft top .
When opening or closing the soft top, there
is a risk that parts of the body could become
trapped bymoving parts such as thero of
mechanism, the boot lid, or the side win‐
do ws. 0007
When opening or closing, make sure
that no body parts are in the vicinity of
moving components. 0007
Release the button if somebody
becomes trapped. 0007
Press and hold the0036 button on thekey.
The following functions are per form ed:
R The vehicle is unloc ked.
R The side windo wsare opened when the
boot separator is open.
R The soft top is opened when the boot
separator is closed.
R The seat ventilation of the driver's seat is
switched on. 0007
Tointer rupt convenience opening: release
th e0036 button. Con
venience closing (closing theve hicle
from outside) 000A
WARNING Risk of entrapment caused by
inadver tent con venience closing
When the con venience closing feature is
operating, parts of the body could become
trapped in the closing area of the side win‐
do ws. 0007
Obser vethe comple teclosing proce‐
du re when using con venience closing. 0007
When closing, ma kesure that no body
parts are in the closing area. 000A
WARNING Risk of becoming trapped
when opening/closing the soft top .
When opening or closing the soft top, there
is a risk that parts of the body could become
trapped bymoving parts such as thero of Opening and closing
87
mechanism,
the boot lid, or the side win‐
do ws. 0007
When opening or closing, make sure
that no body parts are in the vicinity of
moving components. 0007
Release the button if somebody
becomes trapped. 0007
Press and hold the0037 button on thekey.
The following functions are per form ed:
R The vehicle is loc ked.
R The soft top is closed.
The side windo wsare closed when the
soft top is closed. 0007
Tointer rupt convenience closing: release
th e0037 button.
0009 Con venience closing wi thKEYLESS-GO only
closes the side windo ws (0013 page 80). Problems with
the side windo ws Problem
Possible causes/consequences and 0050
0050 Solutions
A side window cann otbe closed and
yo u cannot see the cause. 0007
Check tosee whe ther any objects are in the window guide.
000A WARNING Risk of becoming trapped or fata lly injured if reve rsing pr otection is not activated
If yo u close a side wind owagain immediately af ter it has been bloc ked or reset, the side window closes
with increased or maximum forc e. The reve rsing feature is then not active.
Pa rts of the body could become trapped in the closing area in the process. 0007
Make sure that no parts of the body are in the closing area. 0007
Tostop the closing process, release the button or press the button again toreopen the side win‐
do w. If a side window is obstructed during closing and
reopens again slightly: 88
Opening and closing
Problem
Possible causes/consequences and 0050
0050Solutions 0007
Immediately af terth e window is bloc ked, pull the cor responding switch again until the side window has
closed, and hold the switch for an additional second.
The side window will be closed with increased forc e.
If a side window is obstructed again during closing and reopens again slightly: 0007
Repeat the pr evious step.
The side window is closed without the automatic reve rsing function.
The side windo wscannot be opened or
closed using the con venience opening
fe ature. The
key bat tery iswe ak or dischar ged. 0007
Check the battery using the battery indicator lamp and replace if necessary (0013 page76). Soft
top Opening and closing
the soft top using the
so ft-top switch 000A
WARNING Risk of becoming trapped
due tothe soft top lo wering unexpect‐
ed ly
If yo u do not fully open/close the soft top,
th e soft-to phy draulics depressurise af ter a
short time. This causes
the soft topto lowe r unexpect‐
edly and may cause you or others tobe trap‐
ped. 0007
Alw ays fully open or close the soft top. 000A
WARNING Risk of becoming trapped
when opening/closing the soft top .
When opening or closing the soft top, there
is a risk that parts of the body could become trapped
bymoving parts such as thero of
mechanism, the boot lid, or the side win‐
do ws. 0007
When opening or closing, make sure
that no body parts are in the vicinity of
moving components. 0007
Release the button if somebody
becomes trapped. Opening and closing
89
0007
Switch the ignition on. 0007
Toactivate: pull button 1.
AIR CAPex tends and the indicator lamp on
button 1lights up. 0007
Todeactivate: press button 1.
AIR CAPre tracts and the indicator lamp on
button 1goes out. If
th eve hicle is par ked with the soft top open
and the ignition is switched off, AIR CAP will
re tract au tomatical ly.
When youre start the engine af ter having been
par ked, AIR CAP will extend again au tomatically. Fi
tting and removing the folding draught
stop 000A
WARNING Risk of accident when using
th e draught stop in poor visibility condi‐
tions
The draught stop impairs your view tothe
re ar, particular ly when darkor in poor visibil‐
ity conditions. 0007
Only use the draught stop in good visi‐
bility conditions. 000A
WARNING Risk of accident and inju ry
due toan incor rectly fitted draught stop
If th e draught stop is not cor rectly fitted it
can come loose du ring the journey and
endanger other road users. 0007
Fitthe draught stop as described. 0007
Do not place objects on thefitted
draught stop. 000E
NO
TEThe draught stop can be damaged
if fitted when the soft top is closed The
vehicle interior or the draught stop can
be damaged if fitted when the soft top
closed. 0007
Tofit, open the soft top. 000E
NO
TEDama getothe draught stop due
to collision wi thseat backrests The draught
stop may collide with the front
seat backrests when fitted. 0007
Adjust the backrest positions of the
front seats. The
folding draught stop is fitted overth ere ar
seats toprotect against wind when you are driv‐
ing with the soft top open. Only the front seats
can be occupied when thefo lding draught stop
is fitted. Opening and closing
93
Note
s onthe cor rect driver's seat position 000A
WARNING Risk of inju rythro ugh adjust‐
ing vehicle settings while theve hicle is in
motion
Yo u could lose cont rol of theve hicle in the
fo llowing situations:
R ifyo u adjust the driver's seat, the head
re stra ints, thesteering wheel or the mir‐
ro r while theve hicle is in motion
R ifyo ufast enyour seat belt while theve hi‐
cle is in motion 0007
Before starting the engine: adjust the
driver's seat, the head restra ints, the
st eering wheel or the mir ror and fasten
yo ur seat belt. Ensure
thefo llowing when adjusting thesteering
wheel 1, seat belt 2and driver's seat 3:
R you are as faraw ay from the driver's airbag
as possible
R you are sitting in an upright position
R your thighs are slight lysuppor tedby the seat
cushion R
your legs are not fully extended and you can
depress the pedals properly
R the back of your head is suppo rted at eye
le ve lby the cent reofthe head restra int
R you can hold thesteering wheel with your
arms slightly bent
R you can mo veyour legs freely
R you can see all the displa yson the instru‐
ment clus ter clea rly
R you ha vea good overview of the traf fic con‐
ditions
R your seat belt is pulled snug lyagainst your
body and is routed across the cent reofyour
shoulder and across your hips in the pelvic
area 100
Seats and stowing
0007
Toswitch on/increase the le vel:press but‐
to n1 repeatedly until the desired heating
le ve l is set.
Depending on the heating le vel, up tothree
indicator lamps light up. 0007
Toswitch off/reduce the le vel:press but‐
to n1 repeatedly until the desired heating
le ve l is set.
If all indicator lamps are off, the seat heater
is switched off.
0009 The seat heater automatically switches down
from theth re e heating le vels af ter 8, 10and
20 minutes until the seat heater is switched
off. Setting
the panel heating Multimedia sy
stem:
0018 Vehicle 0019
î Vehicle settings
0019 Panel heating
When the seat heater is switched on, the armr‐
ests in theve hicle as well as the cent reconsole
can be hea ted using this function.
Setting options 0007
Select Front and rear, Front only,Rear only
or Off . Switching
the seat ventilation on/off Re
quirements:
R the po wer supp lyis switched on 0007
Toswitch on/increase the le vel:press but‐
to n1 repeatedly until the desired ventila‐
tion le vel is set.
Depending on theve ntilation le vel, up to
th re e indicator lamps light up. 0007
Toswitch off/reduce the le vel:press but‐
to n1 repeatedly until the desired ventila‐
tion le vel is set.
If all indicator lamps are off, the seat ventila‐
tion is switched off. Switching AIRSCARF on/o
ff 000A
WARNING Risk of bu rns caused bythe
heating output from AIRSCARF being too
high
When AIRSCARF is switched on, very hot air
can flow from the outlet opening in the head
re stra ints.
This could result in burns in the immediate
vicinity of the outlet opening. 0007
Turn the heating output down in good
time. Seats and
stowing 109