2018 MAZDA MODEL MX-5 MIATA lights

[x] Cancel search: lights

Page 376 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual Remarks:
*1 The engine oil and filter must be changed at least once a year or within 12,000 km (7,500 miles) since last
engine oil and filter change. Re set the engine oil data whenever replacing the

Page 378 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual Canada residents
Maintenance IntervalNumber of months or kilometers (miles), whichever comes first.
Months 6 1218243036424854606672
×1000 km 8 16 24 32 40 48 56 64 72 80 88 96
×1000 miles 5 10 15 20

Page 382 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual ▼Schedule 2
Maintenance Interval Number of months or kilometers, whichever comes first
Months 3 6 9 121518212427303336
×1000 km 5 10 15 20 25 30 35 40 45 50 55 60
Drive belts I
Engine oil & filter

Page 383 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual C: Clean
T:  Tighten
D:  Drain
Remarks:
*1 Use of FL-22 is recommended wh en replacing engine coolant. Using engine coolant other than FL-22 may
cause serious damage to the engine and cooling system.

Page 410 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual Light Bulbs
Overhead lightSide turn signal lights
High-mount brake light
Trunk light
Front side-marker lights
Front turn signal lights
Headlights (Low/High beam)
P
arking lights
Daytime running lights

Page 411 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual CAUTION
When removing the lens or lamp unit using
a flathead screwdriver, make sure that the
flathead screwdriver does not contact the
interior terminal. If the flathead screwdriver
contacts the termi

Page 412 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual 5. Disconnect the bulb from the socket. 
6. Install the new bulb in the reverseorder of the removal procedure.
Front side-marker lights
1. Make sure the ignition is switched off, and the headlight swi

Page 413 of 576

MAZDA MODEL MX-5 MIATA 2018  Owners Manual 4. Disconnect the connector from the unitby pressing the tab on the connector
with your finger and pulling the
connector rearward.
 
5. Turn the socket and bulb assemblycounterclockwise and remove it.