▼Lane Departure Warning Sound*
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
•The volume of the Lane-keep Assist
System (LAS) & Lane Departure
Warning System (LDWS) warning sound
can be changed.
Refer to Personalization Features on
page 9-9.
•The type of the Lane-keep Assist System
(LAS) & Lane Departure Warning
System (LDWS) warning sound can be
changed.
Refer to Personalization Features on
page 9-9.
▼Excessive Speed Warning*
If the vehicle speed exceeds the speed
limit sign displayed on the active driving
display, the warning sound is activated and
the area around the speed limit sign
displayed on the active driving display
flashes 3 times in amber, and if the vehicle
speed continues to exceed the displayed
speed limit sign, the indication stops
flashing and remains on.
▼Collision warning*
If there is a possibility of a collision with a
vehicle ahead or an obs
truction at the rear
of the vehicle, the warning light in the
instrument cluster flashes at the same time
as the warning indication is displayed in
the multi-information d isplay or the active
driving display, and a warning sound is
activated intermittently.
▼ Mazda Radar Cruise Control with
Stop & Go function (MRCC with
Stop & Go function) System
Wa r n i n g s
*
The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) system warnings notify the
driver of system problems and precautions
on use when required. Check after hearing
a warning beep sound.
Warning beep What to check
While the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func-
tion) system is operating,
a single beep sound is
heard when “Front radar
blocked” is displayed in
the multi-information
display. Cancel the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func-
tion) system if the radar
sensor (front) becomes
dirty. Clean the area
around the radar sensor
(front).
The beep sounds inter-
mittently while the vehi-
cle is being driven. The distance between
your vehicle and the ve-
hicle ahead is too close.
Verify the safety of the
surrounding area and re-
duce vehicle speed.
While the Mazda Radar
Cruise Control with Stop
& Go function (MRCC
with Stop & Go func-
tion) system is operating,
a single beep sound is
heard when “Front radar
sensor system malfunc-
tion” is displayed in the
multi-information dis-
play. A malfunction in the
system may be indicated.
Check the center display
to verify th
e problem
and then have your vehi-
cle inspected by an Au-
thorized Mazda Dealer.
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
7-46*Some models.
CX-5_8GN5-EA-17J_Edition1 2017-8-18 12:58:27
9Specifications
Technical information about your Mazda.
Identification Numbers..................... 9-2 Vehicle Information Labels.......... 9-2
Specifications..................................... 9-4 Specifications............................... 9-4
Personalization Featur es...................9-9
Personalization Features............... 9-9
9-1
CX-5_8GN5-EA-17J_Edition1 2017-8-18 12:58:27
Personalization Features
The following personalization features can be set or changed by the customer or an Author-
ized Mazda Dealer. Consult an Authorized Mazda Dealer for details.
Additionally, some of the persona lization features can be changed by the customer depend-
ing on the feature.
Personalization features and settings which can be changed diff er depending on the market
and specification.
Settings Change Method
Settings can be changed by opera ting the center display screen.
A: Refer to Settings on page 5-115.
B: Refer to Fuel Economy Monitor on page 4-79.
C: Refer to Active Drivi ng Display on page 4-27.
Settings can be changed by op erating the vehicle switches.
D: Refer to Auto Lock/Unlock Function on page 3-16.
E: Refer to Transmitter on page 3-4.
F: Refer to Locking, Unlocking with Request Switch (With the ad vanced keyless function)
on page 3-13.
Settings can be changed by an Authorized Mazda Dealer.
Item FeatureFactory
Setting Available Settings Settings
Change
Method
Safety
Advanced Smart City
Brake Support (Ad-
vanced SCBS) (page
4-136)
Smart Brake Support
(SBS) (page 4-144) The system can be changed so that Ad-
vanced Smart City Brake Support (Ad-
vanced SCBS) does not operate.
*1On On/Off A ―
The distance at which the collision warn-
ing activates can be changed.
Med. Far/Med./Near A ―
The volume of the
collision warning can
be changed. High High/Low/Off A ―
Smart City Brake Sup-
port (SCBS) (page
4-140)The system can be changed so that Smart
City Brake Support (SCBS) does not op-
erate.
*1On On/Off A ―
Specifications
Personalization Features
9-9
CX-5_8GN5-EA-17J_Edition1
2017-8-18 12:58:27
ItemFeatureFactory
Setting Available Settings Settings
Change
Method
Lane-keep Assist Sys-
tem (LAS) & Lane De-
parture Warning System
(LDWS) (page 4-125) The system can be changed so that the
steering wheel assist does not operate.
On On/Off A ―
When the steering
wheel operation assis-
tance is turned onThe cancel sensi-
tivity of the steer-
ing assistance for
the system can be
changed.
High High/Low A ―
The system can
be changed so
that the Lane De-
parture Warning
does not activate.
On On/Off A ―
When the steering
wheel operation assis-
tance is turned off The warning tim-
ing in which the
system deter-
mines that the ve-
hicle may be de-
viating from its
lane can be
changed.
At At/Before A ―
The sensitivity of
the warning for
the system can be
changed.
Often Often/Rare A ―
Lane-keep Assist Sys-
tem (LAS) & Lane De-
parture Warning System
(LDWS) (page 4-125) The type of Lane-keep Assist System
(LAS) & Lane Departure Warning Sys-
tem (LDWS) warning can be changed.
Vi b r a t i o n
Vibration/Beep/
Rumbl. A―
The warning intensi-
ty/volume of the sys-
tem can be changed. Vibration Low High/Low A ―Rumbl.
Low High/Mid/Low A ―
Beep Low High/Low A ―
Blind Spot Monitoring
(BSM) (page 4-93) The system can be ch
anged so that Blind
Spot Monitoring (BSM) does not oper-
ate.*1On On/Off A ―
Warning beep volume*2High High/
Low/ Off A―
Specifications
Personalization Features
9-10
CX-5_8GN5-EA-17J_Edition1
2017-8-18 12:58:27
ItemFeatureFactory
Setting Available Settings Settings
Change
Method
Distance Recognition
Support System (DRSS)
(page 4-105) The system can be changed so that Dis-
tance Recognition Support System
(DRSS) does not operate.*1On On/Off A ―
The distance at which the vehicle ahead
and your vehicle indicated in the display
flashes in white can be changed.
Near Far/Med./Near A ―
Traffic Sign Recogni-
tion System (TSR)*3
(page 4-99)The Traffic Sign Recognition System
(TSR) can be set to inoperable.
*1On On/Off A ―
The warning pattern of the excessive
speed warning can be changed.
OffOff/
Vi s u a l /
Audio & Visual A―
The activation timi
ng for the excessive
speed warning can be changed.00/5/10 A―
Ve h i c l e
Door locks (page 3-16) Operation condition of auto lock/unlock
function Lock:
Driving, Unlock:
IGN Off Lock: Out of Park
Unlock: In Park/
Lock: Shifting Out of
Park/
Lock: When Driving Unlock: In Park/
Lock: When Driving
Unlock: IGN Off/
Lock: When Driving/
Off AD
Keyless entry system
(page 3-3)
Method for unlocking door using trans-
mitter
Once:
Driver's,
Twice: All Doors Touch Once: All
Doors/
Once: Driver's,
Twice: All Doors AE
Time for locking door automatically
60 sec-
onds 90 seconds/
60 seconds/
30 seconds A―
Specifications
Personalization Features
9-11
CX-5_8GN5-EA-17J_Edition1
2017-8-18 12:58:27
ItemFeatureFactory
Setting Available Settings Settings
Change
Method
Advanced keyless entry
system (page 3-9) Method for unlocking door using request
switch/transmitter
Once:
Driver's,
Twice: All Doors Touch Once: All
Doors/
Once: Driver's,
Twice: All Doors A
E,
FTime for locking door automatically 60 sec-
onds 90 seconds/
60 seconds/
30 seconds A―
Auto-lock function operation/non-opera-
tional
Off On/Off A ―
Beep volume when locking/unlocking Medium High/
Medium/ Low/Off A
E,
F
Illuminated entry sys-
tem (page 5-130) Time until interior lights turn off after
closing door
15 sec-
onds 60 seconds/
30 seconds/
15 seconds/
7.5 seconds A―
Time until interior lights turn off auto-
matically when any door is not closed
completely 30 mi-
nutes 60 minutes/
30 minutes/
10 minutes A―
Auto-wiper control
(page 4-53)
Operational/non-operational On
On/Off*4A―
Daytime running lights
(page 4-51)Operational/non-operational On On/Off ― ―
Auto headlight off*5
(page 4-46)Time until head
lights turn off 30 sec-
onds 120 seconds/
90 seconds/
60 seconds/
30 seconds/
0 seconds
*6
A―
Auto-light control (page
4-46) Timing by which lights turn on Medium Low/
Med.Low/ Medium/
Med.High/ High A―
High Beam Control
System (HBC) (page
4-90)
Operational/non-operational*1On On/Off A ―
Adaptive Front Lighting
System (AFS) (page
4-89)Operational/non-operational*1On On/Off A ―
Specifications
Personalization Features
9-12
CX-5_8GN5-EA-17J_Edition1
2017-8-18 12:58:27
ItemFeatureFactory
Setting Available Settings Settings
Change
Method
Lights-on reminder*7
(page 7-42) Warning beep volume High High/Low/Off A ―
Coming home light
(page 4-49)
Time until headlights turn off
30 sec-
onds 120 seconds/
90 seconds/
60 seconds/
30 seconds/ Off A―
Leaving home light
(page 4-50)
Operational/non-operational On On/Off A ―
Turn signal indicator
(page 4-52)Beep volume High High/Low A ―
Three-flash turn signal
(page 4-52)Operational/non-operational On On/Off A ―
System
Language Language indicated in display
US Eng-
lish Depends on market
*9A―
Temperature
Temperature unit indicated in display °F or °C °F/°C A ―
Distance Distance unit indicated in display mi or km mi/km A ―
Fuel Economy Monitor (page 4-79)
Ending display Display/non-display Off On/Off B ―
Fuel economy resetting
procedure Linkage/non-linkage with fuel economy
reset and trip meter A reset
Off On/Off B ―
Specifications
Personalization Features
9-13
CX-5_8GN5-EA-17J_Edition1
2017-8-18 12:58:27
ItemFeatureFactory
Setting Available Settings Settings
Change
Method
Active Driving Display (page 4-27)
Display Setting can be changed so that the Active
Driving Display is
not displayed. On On/Off C ―
The display height
(up/down position)
can be changed. 013 steps up/down
from initial setting (total: 27 steps) C―
The method for adjusting the display
brightness (automat
ically/manually) can
be changed. Auto Auto/Man. C ―
The standard brightness while automatic
adjustment is selected can be changed us-
ing the brightness adjustment.
02 steps up/down from
initial setting (total: 5 steps) C―
The standard brightness while manual
adjustment is selected can be changed us-
ing the brightness adjustment. 020 steps up/down
from initial setting (total: 41 steps) C―
The display angle can be changed.
03steps up/down from
initial setting (total: 7steps) C―
Navigation guidance Display/non-display
On On/Off C ―
*1 Though these systems can be turned Off, doing so will defeat the purpose of the system and Mazda
recommends that these systems remain On.
*2 Only the volume of the warning beep during Blind Spot Monitori ng (BSM) operation can be changed. The
volume of the warning beep durin g Rear Cross Traffic Alert (RCTA) operation cannot be changed.
*3 This system functions only when t he navigation system is functioning.*4 If the auto-wiper control is set to Off, the wiper lever position is set to in termittent operation.*5 If the setting is changed to O ff, the following operation is performed according to the headlight switch
position:
•At position: Headlights turn off immediately after the ignition i s switched off.•At any position other than : Headlights on/off conditions vary according to the headlight switch
position. Refer to Headlights on page 4-46.
*6 When set to Off, the lights-on reminder is operable.*7 The lights-on reminder settings can be changed at anytime, how ever, the lights-on reminder only operates
when the auto headlight function is set to Off. Refer to Lights-On Reminder on page 7-42.
*8 The operation may stop in 15 mi nutes due to the effect of the outside temperature even if the operation time of
the rear window defogger has been changed to Continuous.
*9 Available only in display from the center display.
Specifications
Personalization Features
9-14
CX-5_8GN5-EA-17J_Edition1 2017-8-18 12:58:27