2018 MAZDA MODEL CX-3 brake light

fuse isofix inflation pressure jacking points fog light suspension

Page 3 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) TABLE OF \bONTENT\f m{zd{ C X-3 2 Drivers View 4 A dvanced Keyless Entry 5 S tarting the Engine 6 T ire Pressure Monitoring System 7 S eats 8 MAZD A CONNECT Infotainment Syst$

Page 7 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) m{zd{ c x-3 5 STARTING THE ENGINE WITH ACCELERATED WARM-UP SYSTEM (AWS) The CX\f3 is equipped with \XSKYACTIV combustion technology. This technology includes AWS for optimal emission performance$

m{zd{ c x-3 5
STARTING THE ENGINE WITH ACCELERATED WARM-UP SYSTEM (AWS)
The CX\f3 is equipped with \XSKYACTIV combustion
technology. This technology includes AWS for optimal
emission performance during cold\fstart conditions.
While Carrying the Advanced Key: •
\fTART THE ENGINE by pushing the \fTART/\fTOP ENGINE
button while pushing t\.he brake pedal.
•
WHAT WILL YOU NOTI\bE? On start-up, the engine speed\.
and sound are elevated (1500 RPM) for less than one minute to quickly bring th\.e catalyst to efficient operating temperature. The RPM will reduce to idle once the
temperature is achieved. This is normal engi\.ne operation under cold-start conditions.
• WHAT DOE\f THI\f DO? This reduces emissions and allows Mazda to improve efficiency.
•
\fHUT THE ENGINE OFF\. by making sure the vehicle is in Park and setting the electric \.
parking brake, then push the \fTART/\fTOP ENGINE button.
•
A\bTIVATE A\b\bE\f\fORIE\f (A\b\b) by pushing the \fTART/\fTOP ENGINE button once
without pushing th\.e brake pedal.
•
TURN THE IGNITION \.TO THE ON PO\fITION by pushing the \fTART/\fTOP ENGINE button
twice without pushing \.the brake pedal.
EMERGENCY ENGINE STOP
Pushing and holdin\.g the \fTART/\fTOP ENGINE button or repeatedly pushing the
\fTART/\fTOP ENGINE button while the engin\.e is running will \.turn the engine OFF\.. Use only in case of an emergency.
NOTE: You can drive the vehicle during AW\f activation; there is no need to wait. The
engine may not start if the key cannot be detected. The key indicator light may flash RED
or “Key not detected” may be displayed if the key is placed in the cup holder.
If the \fTART/\fTOP ENGINE button indicator light flashes AMBER, this could indicate a
problem with the eng\.ine starting system. You may not be able to start the engine or
switch the ignition to A\b\b or ON. Have your vehicle inspected at an Authorized Mazda Dealer as soon as possible.
\fTARTING THE ENGINE
START/STOP ENGINE button
2940109_18b CX-3 SSG_060817.indd 56/8/17 2:37 PM

Page 8 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) 6 MAZDAUSA.COM TIRE PRESSURE MONITORING SYSTEM (TPMS) For your safety, the CX\f3 is equipped with TPMS that detects low tire pressure in one or more tires. If the tire pressure starts getting$

6 MAZDAUSA.COM
TIRE PRESSURE MONITORING SYSTEM (TPMS)
For your safety, the CX\f3 is
equipped with TPMS that detects low tire pressure in one or more
tires. If the tire pressure starts
getting low in one or more tires, the system alerts the driver by
turning on a light in the instrument
cluster (p. 40\f41) and sounding an
alarm.
WHAT TO DO? Don’t ignore the TPM\f warning light. \ftop and check
your tire pressure (when tires are cold) and inflate the tires to the proper pressure. Properly inflated tires are safer, last longer, and increase fuel economy.
In the following cases, the TPMS must be “initialized” so the system
can operate normally.
• The tire pressure is adjusted (up or down) in one or more tires.
• A tire rotation is performed.
• Any tire or wheel is replaced.
•
The vehicle’s battery is disconnected, replaced or completely dead.
INITIALIZATION PROCESS
(TPMS WARNING LIGHT IS ILLUMINATED)
1 Park the vehicle in a safe place and firmly apply \.the parking brake.
2
Let the tires cool, then adjust the tire pressure to the specified
pressure (see tire label located on the driver’s side door jamb a\.rea)
on all four tires.
3 \fwitch the ignition ON\., but leave the vehicle parked.
4
Push and hold the \.TPM\f “\fet \fwitch" (left side of dash) until the
TPM\f warning light in the instrument cluster flashes twice and a beep sound is heard once.
NOTE: Drastic changes in temperature or altitude can affect the air
pressure in the tires and may cause the TPM\f warning light to turn on.
Verify the tire pressures when driving thr\.ough extreme temperature or altitude changes.
TPMS “Set Switch”
TIRE PRE\f\fURE MONITORING \fY\fTEM
CAUTION:
If the TPM\f “\fet
\fwitch” is pushed
without adjusting the tire pressure,
the system
cannot detect the normal tire
pressure. The
TPM\f warning light may not turn
on, even if the tire pressure is low, or it may turn on if
the tire pressure is normal.
2940109_18b CX-3 SSG_060817.indd 66/8/17 2:37 PM

Page 21 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) m{zd{ c x-3 19 A\bTIVE DRIVING DI\fPLA\.Y (IF EQUIPPED) ACTIVE DRIVING DISPLAY To change the settings/adjustments for the Active Driving Display: 1 \felect the \fettings icon on the Home screen.$

m{zd{ c x-3 19
A\bTIVE DRIVING DI\fPLA\.Y
(IF EQUIPPED)
ACTIVE DRIVING DISPLAY
To change the settings/adjustments for the Active Driving Display:
1 \felect the \fettings icon on the Home screen.
2 \felect the AD-Disp \.tab.
3 \felect the desired item to change.
HEIGHT: Adjust the position of the virtual image of
the Active Driving Display up or down.
BRIGHTNESS CONTROL: Method for adjusting
screen brightness (automatically with instrument
cluster illumination or\. manually).
CALIBRATION: Brightness initialization setting
(when selecting automatic adjustment).
BRIGHTNESS: Brightness adjustment (when
selecting manual ad\.justment).
NAVIGATION: On/Off.
ACTIVE DRIVING DISPLA\XY: On/Off.
RESET: Reset to default settings.
NOTE:
•
If the display does not operate, switch the ignition
OFF and then switch it back ON. If it still does not
operate even with the igniti\.on switched ON, have the vehicle inspected at an Authorized
Mazda Dealer.
•
It may be difficult to view the display when wearing sunglasses.
Take off your sunglasses or adjust the luminosity.
•
If the battery has been removed and re-installed or the battery
voltage is low, the adjusted position may deviate.
•
The display may be difficult to view or be temporarily affected by
weather conditions such as \.rain, snow, light, and temperature.
Vehicle Speed Setting using cruise control
Navigation Turn\fBy\fTurn(TBT) direction, distance and lane guidance
Traffic Sign Recognition(TSR) using navigation
55Speed Limit
IF EQUIPPED
Lane Departure Warning
System (LDWS) operation conditions and warnings
Smart Brake Support (SBS) warnings
Vehicle Speed Setting using cruise control
CAUTION:
Always adjust the
display using the
\fettings screen
(AD-Disp tab).
DO NOT try to
adjust the angle
or open/close the
display by hand.
Fingerprints on
the display will
make it difficult to
view and manual
operation could
cause damage.
2940109_18b CX-3 SSG_060817.indd 196/8/17 2:38 PM

Page 22 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) 20 MAZDAUSA.COM MAZDA RADAR CRUISE CONTROL (MRCC) SYSTEM The MRCC system maintains vehicle speed and f\Xollowing distance using a radar sensor to detect a vehicle ahead. The driver simply presets$

Page 42 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) 40 MAZDAUSA.COM GLOSSARY OF WARNING AND INDICATOR LIGHTS Lane Departure Warning System (LDW\f) On (Amber)/ Lane Detected (Green) (p. 24) Lane Departure Warning System (LDW\f) OFF$

Page 48 of 50

$MAZDA MODEL CX-3 2018 Smart Start Guide (in English) VEHICLE PRESENTATION: Refer to the \fmart \ftart Guide during presentation. ESSENTIAL INFORMATION Driver\bs View • Location of \fwitches and \bontrols Advanced Keyless Entry System* •$

start stop button fuel filter steering climate settings change language tire pressure reset